Extraordinary Firearms Auction

SN 7877. Cal. 7.63 mm. 5.5î bbl and 50-500 graduated rear sight. Most 6-shot Conehammers in this range had a fixed sight. This pistol has a lon...

SN 1545. Cal. 7.65 Mauser. Standard configuration with ten shot mag, and tangent rear sight graduated 1 to 10, has 23 groove wooden grips. Take down s

SN 637. Cal. 7.63mm. Mauser made approx. 1,000 carbines that were numbered in a separate serial range. The frame characteristics of the large ring car

SN 279. Cal. 7.63mm. Mauser made approx. 1,000 carbines that were numbered in a separate serial range. Characteristically, the chamber has longer flut

SN 1010. Cal. 7.63mm. This was the final form of Mauser's standard production carbine. About 100 of these guns were assembled as most examples h...

SN 12841. Cal. 7.63mm. 5.5î bbl and pinned 50-500 rear sight. Complete disassembly shows all small parts factory matched including firing pin r...

SN 3881. Cal. 7.63mm. Italian Navy Flatside with 5-1/2" bbl, long extractor, slip-in 1-10 rear sight, large ring hammer and single lug firing p...

SN 411. Cal. 7.63mm. 5.5î bbl and slip-in 5-500 rear sight. The WWI German Army tested approximately 450 C96s. In first group were Early Large ...

SN 20814. Cal. 7.63mm. Late Transitional large Ring Hammer with 5-1/2" bbl, long extractor, slip-in 1-10 rear sight, single lug firing pin and ...

SN 20852. Cal. 7.63mm. The late transitional C96s were likely assembled to use up the remaining Conehammer parts prior to introducing the Flatside. Pr

SN 21277. Cal. 7.63mm. Early Commercial Flatside with 5-1/2" bbl, long extractor, pinned 1-10 rear sight, single lug firing pin and large ring ...

SN 22702. Cal. 7.63mm. Late Commercial Flatside with 5-1/2" bbl, slip-in 1-10 rear sight, single lug firing pin and large ring hammer. Usual ch...

SN 28355. Cal. 7.63mm. Late Commerical Flatside with 5-1/2" bbl, long extractor, slip-in 50-1000 rear sight, single lug firing pin and large ri...

SN 29384. Cal. 7.63mm. Extraordinarily crisp Pre-War Bolo with 4" bbl, 50-1000 slip-in rear sight, single lug firing pin and large ring hammer....

SN 29612. Cal. 7.63mm. Scarce 6-shot Bolo with 4" bbl, fixed sight, long extractor, single lug firing pin and large ring hammer. Standard addre...

SN 29563. Cal. 7.63mm. Standard six-shot Bolo has 4" bbl, long extractor, slip-in 50-1000 rear sight, single lug firing pin and large ring hamm...

SN 30457. Cal. 7.63mm. Very attractive Large Ring, Shallow Milled C96 with 5-1/2" bbl, long extractor, slip-in 50-1000 rear sight and single lu...

SN 30539. Cal. 7.63mm. Exceptionally nice large ring, shallow milled C96 with 5-1/2" bbl, long extractor, slip-in 50-1000 rear sight and single...

SN 32784. Cal. 7.63mm. Exceptionally nice large ring, Late Shallow Milled C96 with 5-1/2" bbl, long extractor, slip-in 50-1000 rear sight and s...

SN 32021. Cal. 7.63mm. Exceptionally nice large ring, shallow milled C96 with 5-1/2" bbl, long extractor, slip-in 50-1000 rear sight and single...