Extraordinary Firearms Auction

SN 4470b. Cal. 9mm. 6" Barrel. Standard configuration with undated receiver, long sear bar, and no grip safety. Left rear receiver is marked &q...

SN 1963. Cal. 9mm. Standard configuration with 6" bbl and adjustable rear sight mounted on rear toggle. All correct proofs and matching numbers...

SN 2388. Cal 9mm. Standard Navy Luger with 6" tapered round bbl, small dovetail front sight and 100/200 meter rear sight. Chamber area of the r...

SN 796. This is certainly the most unique and important Enigma-related artifact to have survived WWII. It is the complex and well-used cover of a Nava

SN 7912f. Cal. 9 mm. Standard configuration having 8" bbl with tangent rear sight and non-adjustable front sight. All numbers match, including ...

SN 94 a. Cal. 30 Luger. 3-3/4" Bbl. Standard configuration DWM, with nitro proofs and all matching markings in the correct places. Pistol has b...

SN 22. Cal. 7.65mm Borchardt. Spectacular orig early Borchardt with 7-1/2" tapered rnd bbl, pinned triangular shaped front sight and v-notch re...

SN 485. Cal 7.65mm Borchardt. Blue finish with 7-1/2" tapered rnd bbl. Pinned front sight with fixed V-notch rear sight atop the spring housing...

SN 157. Cal. 9mm. Mauser made fewer than 200 M1912-14 pistols. Most of these had a fixed sight. This restored example has a 1-line address and a repla

NSN. Cal. 10x25MM. Mannlicher made approximately 1000 1897s in several configurations. In general, the earliest pistols had a fixed (nondetachable) ma

SN 259. Cal. 7.63 mm. 4.75î bbl, tapered chamber and fixed rear sight. Thin backstrap never made for shoulder stock. Early large crown U proofi...

SN 203. Cal. 7.63 mm. 5.5î bbl and 1-10 pinned rear sight. Mauser only made 150 tapered chamber ìSystem Mauserî pistols, in the appro...

SN 67. Cal. 7.63mm. One of just one hundred 20- shot Flatsides that were largely delivered to South America. This gun was restored by Gale Morgan, a w

SN 27. Cal. 7.63mm. Magnificent .20-shot Flatside with 5.5î bbl and pinned 50-500 rear sight. The bbl extension, sight assembly, firing pin ret...

SN 4692. Cal. 7.63mm. 5.5î bbl and pinned 1-10 rear sight. An exceptionally nice mid-production Conehammer with bright, orig blue. All matching...

SN 6309. Cal. 7.63mm. 5.5"bbl and pinned 50-500 rear sight. A nice mid-production Conehammer with bright, orig blue. All matching except the fo...

SN 4124. Cal. 7.63mm. 5.5î bbl and pinned 1-10 rear sight. Standard production Conehammer in extraordinary condition. Extended disassembly show...

SN 2749. Cal. 7.63mm. 5.5î bbl and Mauser Cartridge 303 rear sight. This early Conehammer has all standard features except the very unusual Mau...

SN 3116. Cal. 7.63. 5.5" bbl and pinned 1-10 rear sight. An early Conehammer range pistol. Hammer has been replaced with a hand-made hammer. &#...

SN 9208. Cal. 7.63mm. Standard 10-shot, 5.5î bbl Conehammer with pinned 50-500 rear sight. Extensive take down shows all components to be orig ...

SN 10303. Cal 7.63mm. 4.75î bbl and fixed sight. All orig 10-shot Conehammer with fixed sight. Everything is matching including the follower, f...

SN 9682. Cal. 7.63mm. 5.5î bbl and pinned 1-10 rear sight. One of very few milled panel 20-shots in an established SN range. Perfect profession...

SN 7622. Cal. 7.63mm. 5.5" bbl. After WWI many surplus C96s were resold. To enhance their resale, a number were reconfigured by Geco. In this c...

SN 6385. Cal. 7.63mm. Standard 10-shot, 5.5î bbl and pinned 50-500 rear sight. This mid-range Conehammer is in exemplary condition. Detailed di...

SN 12227. Cal. 7.63mm. WESTLEY RICHARDS marked with 5.5î bbl and pinned 50-500 rear sight. The Westley Richards logo was pantographed in the fo...

SN 14716. Cal. 7.63mm. Standard 10-shot Conehammer with pinned 1-10 rear sight and 5.5î bbl. Top of bbl marked by British distributor John Rigb...

SN 973. Cal. 7.63mm. 5.5î bbl and pinned 1-10 rear sight. This very early production Conehammer has the non-recessed barrel extension that is u...

SN 7085. Cal. 7.63mm. Later production 4î bbl extension and slip-in 100-1000 rear sight. A small number of Conehammers had a later configured b...

SN 8108. Cal. 7.63mm. Scarce Conehammer with 4-3/4" bbl, long extractor and fixed sight. Usual address on top of chamber. Crown "U" o...

SN 569. Cal. 7.63mm. 5.5" bbl and pinned rear sight graduated 1-10 in Turkish numerals. Turkey purchased approximately 1,000 Conehammers that w...

SN 7877. Cal. 7.63 mm. 5.5î bbl and 50-500 graduated rear sight. Most 6-shot Conehammers in this range had a fixed sight. This pistol has a lon...

SN 1545. Cal. 7.65 Mauser. Standard configuration with ten shot mag, and tangent rear sight graduated 1 to 10, has 23 groove wooden grips. Take down s

SN 637. Cal. 7.63mm. Mauser made approx. 1,000 carbines that were numbered in a separate serial range. The frame characteristics of the large ring car

SN 279. Cal. 7.63mm. Mauser made approx. 1,000 carbines that were numbered in a separate serial range. Characteristically, the chamber has longer flut

SN 1010. Cal. 7.63mm. This was the final form of Mauser's standard production carbine. About 100 of these guns were assembled as most examples h...

SN 12841. Cal. 7.63mm. 5.5î bbl and pinned 50-500 rear sight. Complete disassembly shows all small parts factory matched including firing pin r...

SN 3881. Cal. 7.63mm. Italian Navy Flatside with 5-1/2" bbl, long extractor, slip-in 1-10 rear sight, large ring hammer and single lug firing p...

SN 411. Cal. 7.63mm. 5.5î bbl and slip-in 5-500 rear sight. The WWI German Army tested approximately 450 C96s. In first group were Early Large ...

SN 20814. Cal. 7.63mm. Late Transitional large Ring Hammer with 5-1/2" bbl, long extractor, slip-in 1-10 rear sight, single lug firing pin and ...

SN 20852. Cal. 7.63mm. The late transitional C96s were likely assembled to use up the remaining Conehammer parts prior to introducing the Flatside. Pr

SN 21277. Cal. 7.63mm. Early Commercial Flatside with 5-1/2" bbl, long extractor, pinned 1-10 rear sight, single lug firing pin and large ring ...

SN 22702. Cal. 7.63mm. Late Commercial Flatside with 5-1/2" bbl, slip-in 1-10 rear sight, single lug firing pin and large ring hammer. Usual ch...

SN 28355. Cal. 7.63mm. Late Commerical Flatside with 5-1/2" bbl, long extractor, slip-in 50-1000 rear sight, single lug firing pin and large ri...

SN 29384. Cal. 7.63mm. Extraordinarily crisp Pre-War Bolo with 4" bbl, 50-1000 slip-in rear sight, single lug firing pin and large ring hammer....

SN 29612. Cal. 7.63mm. Scarce 6-shot Bolo with 4" bbl, fixed sight, long extractor, single lug firing pin and large ring hammer. Standard addre...

SN 29563. Cal. 7.63mm. Standard six-shot Bolo has 4" bbl, long extractor, slip-in 50-1000 rear sight, single lug firing pin and large ring hamm...

SN 30457. Cal. 7.63mm. Very attractive Large Ring, Shallow Milled C96 with 5-1/2" bbl, long extractor, slip-in 50-1000 rear sight and single lu...

SN 30539. Cal. 7.63mm. Exceptionally nice large ring, shallow milled C96 with 5-1/2" bbl, long extractor, slip-in 50-1000 rear sight and single...

SN 32784. Cal. 7.63mm. Exceptionally nice large ring, Late Shallow Milled C96 with 5-1/2" bbl, long extractor, slip-in 50-1000 rear sight and s...

SN 32021. Cal. 7.63mm. Exceptionally nice large ring, shallow milled C96 with 5-1/2" bbl, long extractor, slip-in 50-1000 rear sight and single...