2386

*MAUSER C96 LATE TRANSITIONAL LARGE RING HAMMER WITH MATCHING STOCK.

Currency:USD Category:Firearms & Military Start Price:1,750.00 USD Estimated At:3,500.00 - 5,500.00 USD
*MAUSER C96 LATE TRANSITIONAL LARGE RING HAMMER WITH MATCHING STOCK.
SN 20852. Cal. 7.63mm. The late transitional C96s were likely assembled to use up the remaining Conehammer parts prior to introducing the Flatside. Production was limited, about 500 guns, most being in the range of 20,500-21,000. This example has a 5-1/2" bbl, long extractor, slip-in 50-1000 rear sight, single lug firing pin and large ring hammer. Standard markings on chamber with full SN on left chamber flat. Crown "U" on left side of bbl extension and antler proof on right side. Matching number on bolt stop, bolt, firing pin, hammer, subframe, locking lever and frame. The sight bar and cursor are numbered "905". Detailed disassembly shows matching follower and floorplate, in addition to locking block and all subframe components. The full SN is stamped inside each grip panel. Correct lanyard ring is present. Accompanied by matching shoulder stock whose lid has been notched for the large ring hammer. PROVENANCE: Ralph Merrill Collection CONDITION: Pistol has approx. 70% original blue with balance largely covered by oxidative freckling that is particularly pronounced under the bbl and over the mag well housing. Blue on frontstrap is thinned to a brown-gray with less advanced wear on backstrap. Conehammer trigger has only minor surface discoloration. Small parts including the extractor (that is slightly bent upwards) have about 80% of their original fire blue. Very good to excellent grips. Bore is surprisingly bright with strong rifling and minor frosting. Stock and lid have been painted. Hinge has about 40% oxidation with comparable oxidation and thinning involving the lug. (C&R). 4-47219 LMA86