Space & Aviation

Series 1981 A one-dollar bill, signed in black felt tip by the full crew of the STS-41-D mission: Hank Hartsfield, Jr., Mike Coats, Mike Mullane, Stev

Color glossy 16 x 20 composite photo of the STS-61 crew and various images from their 10-day mission, featuring a flown embroidered mission patch affi

Color glossy 20 x 16 composite photo of the STS-63 crew and various images from their 8-day mission, featuring a flown embroidered mission patch affix

Color glossy 16 x 20 composite photo of the STS-96 crew and various images from their 9-day mission, featuring a flown embroidered mission patch affix

Group of 44 official glossy NASA photos from the Space Shuttle era, 8 x 10 and 10 x 8, consisting primarily of impressive views from space, with subje

Arriflex 16mm film magazine flown on STS-69 and STS-64 as per NASA label on bag. It measures 8.75˝ x 7˝ x 3.25˝, and is marked

Very early left-handed 1000 series Space Shuttle glove TMG (Thermal Micrometeoroid Garment), with two ILC-Dover tags on the interior, reading: "...

Rare right-handed 4000 series Space Shuttle glove restraint layer, with ILC-Dover parts tag sewn on the back of the wrist: "Item: Restraint Ass...

Desirable right-handed 4000 series Space Shuttle glove TMG (Thermal Micrometeoroid Garment), with an ILC-Dover tag on the interior, reading: "I...

Nikon F5 SLR camera modified for use on Space Shuttle missions, equipped with Kodak DCS 760C digital back. The bottom of the camera body bears a &qu...

Flight-ready spare Space Shuttle external tank umbilical plate set utilized to mate with a corresponding plate on the Shuttle orbiter. The umbilical p

Sought-after left-handed Phase VI Space Shuttle glove TMG (Thermal Micrometeoroid Garment), with two ILC-Dover tags on the interior, reading: "...

Space Shuttle-era slidewire escape basket from Kennedy Space Center's Launch Complex 39A, a key component of the Shuttle's emergency egress ...

Two items flown on the Space Shuttle Discovery during STS-131: a wire tie used in the vacuum of space during a spacewalk (EVA) during STS-131; and a f

Seven flexible couplings designed to join air duct tubing on the Space Shuttle, all marked with part numbers, "ME276-0024-0013, 70628713202-13 ...

Small microphone boom associated with the Space Shuttle and International Space Station programs, measuring 6.75˝ long, marked near the base:

Collection of 18 uncommon Space Shuttle items, the majority related to astronaut wardrobe and hygiene, including: a package of six Patagonia thermal f

Unidentified Beta Cloth item from the Space Shuttle program, 8 x 6.25, with front label marked: "P/N SED33113826-301, S/N 1009." The under...

Space Shuttle Cable Attenuator Strut, measuring 18.25˝ long and 1˝ in diameter, marked on the side, "Cable Attenuator Type V, Rockwell

Space Shuttle camcorder bag made of white Nomex, measuring 14.25˝ x 8.5˝ x 9˝, bearing a United Space Alliance tag on the fron

Mounting bracket for the Crewman Optical Alignment Sight (COAS), measuring 6 x 6 x 2, with part numbers reading, "03953 MFR 34758, V620-660721-...

Available to US bidders only. Unflown Multi-Layer Insulation (MLI) Blanket with gold foil on all sides, 14 x 26 x 2, part number "73 A 847011 2...

Flight Data File Container (FDFC) from the Space Shuttle program, 11˝ x 12˝ x 3˝, with front pocket featuring a Boeing Aerospa

Handheld microphone designed for use on board the Space Shuttle, featuring a short 2.5˝ microphone boom attached to a blue anodized box with &q...

Very Lightweight Headset (VLHS) unit designed for use on the Space Shuttle and International Space Station, identified by a label on the headset, &q...

Engineering prototype of a shutoff valve which regulated flow of propellant to the Space Shuttle Main Engine (SSME), measuring approximately 5 x 9 x 3

Large Thermal Multi-Layer Insulation (MLI) Insulation Blanket associated with the Space Shuttle Orbiter Thermal Protection System, measuring approxima

White Multi-Purpose Cure In Place Ablator Applicator (CIPAA) sack, measuring approximately 23˝ long and 18˝ in diameter, with a tag se

Reinforced-carbon carbon (RCC) panel designed for the Space Shuttle, 6˝ x 6˝ x .25˝, marked on an edge: "No. 34, Plate 3." ...

Space Shuttle Personal Preference Kit (PPK) made of white Nomex, measuring 6˝ x 9˝, with a parts tag on the front: "P/N SDD12100370-30

Two "Pallet Clasp" assemblies designed to secure the sleeping bag on the Space Shuttle, each measuring 3.25˝ x 8.5˝, with part n...

Space Shuttle Space Suit Power Harness Assembly (Lower Arm), approximately 16˝ long, comprising a white cable with connectors at each end, lab

Lightweight aluminum stowage tray made by Intercontinental Mfg. Co. of Dallas, Texas, designed to fit in a stowage locker on the Space Shuttle's...

Space Shuttle Storage Locker Prototype, measuring 9.75˝ x 8.75˝ x 5˝, marked inside with part numbers: "R070-660391-001, 3 039

Group of two white Thermal Multi-Layer Insulation (MLI) Insulation Blankets associated with the Space Shuttle Orbiter Thermal Protection System, inclu

Beta cloth thermal protection blanket from the Space Shuttle program, measures 10˝ x 13˝ x 1.25˝ folded (approximately 2

Two belt pads designed for use on the Space Shuttle treadmill: a pad with a tag reading: "Belt Pad Assy—Right, P/N SEG46120253-301, S/N 1...

Space Shuttle urine sample container pouch made of white Nomex, measuring approximately 20˝ x 7˝ x 3˝, with a parts label on t

Triangle-shaped Space Shuttle volume liner made of white Nomex and used in training, measuring approximately 33˝ x 16˝ x 18˝,

Pack of ten Space Shuttle Waste Collection System (WCS) liners, plus one loose liner. The collection container was attached to the WCS wall. It had a

Flown bungee strap launched with the first module of the International Space Station aboard the Russian-built Zarya (also known the Functional Cargo B

Flown segment of Disposable In-Suit Drink Bag (DIDB) from STS-120 Mission Specialist Scott Parazynski's Extravehicular Mobility Unit (EMU) suit....

Very Lightweight Headset (VLHS) unit flown on STS-122, identified by a label on the cable, "VLHS S/N 5903, SED16101291-313." These headset...

Flown nose gear tire segment used on the Atlantis during mission STS-27 and again on Columbia during mission STS-28, approximately .75 x .75. Encased

Flown segment of strain gauge wire harness from STS-3, removed the right wing of the Space Shuttle Columbia. Encased in a limited edition cylindrical

Flown rocket booster fragment cut from an STS-51-D SRB, measuring 2˝ x 1˝ x .5˝, affixed to a 4˝ x 6˝ Morton T

Collection of official NASA press materials associated with the Hubble Space Telescope (HST), including: a Hubble Space Telescope Media Reference Guid

A 1.75˝ x 5.25˝ segment of solar cells as used on the Hubble Space Telescope, affixed to an 11.5˝ x 9˝ mount depicting

Collection of hardware associated with the Hubble Space Telescope, including: three DMU Capture Harnesses; a DIU Flight Model Harness; four bright ora

Vladimir Dezhurov's flown suit worn on the International Space Station during Expedition 3, featuring a zip-up front, Russian flag patch on the ...