Space & Aviation

Official color glossy 10 x 8 red-numbered NASA photo (S-65-63194), which shows the Gemini 7 spacecraft as seen through the hatch window of the Gemini

Official color glossy 10 x 8 red-numbered NASA photo (S-65-63872), which shows the full moon and clouds over the Western Pacific Ocean as seen from th

Official color glossy 8 x 10 red-numbered NASA photo (S-65-61838), which shows liftoff of Gemini 7, carrying James Lovell and Frank Borman. Reverse be

Official color glossy 10 x 8 red-numbered NASA photo (S-66-25781), which shows the Agena Target Docking vehicle seen from the Gemini-8 spacecraft duri

Official color glossy 10 x 8 red-numbered NASA photo (S-66-37966), which shows the Augmented Target Docking Adapter (ATDA) as seen from the Gemini-9 s

Official color glossy 10 x 8 red-numbered NASA photo (S-66-37970), which shows the Augmented Target Docking Adapter (ATDA) as seen from the Gemini-9 s

Display of four color photos commemorating Gemini IX astronauts Thomas Stafford and Gene Cernan, ranging in size from 7 x 6 to 7 x 9.25, including: an

Handsome display featuring embroidered patches of the insignia from the Gemini Program, including Gemini 3 (Girssom/Young), Gemini 4 (McDivitt/White),

Group of items associated with the USS Wasp (CV-18), which served as the recovery ship for five missions: Gemini 4, Gemini 6, Gemini 7, Gemini 9, and

Four issues of Roundup, the official newspaper of the NASA Lyndon B. Johnson Space Center, each dating to 1966, which includes the following dates and

Uncommon spiral-bound booklet for the "National Conference on Space Maintenance & Extra-Vehicular Activities," held in Orlando, Florid...

Group lot of material relating to the Gemini Project, including: a pair of 11 x 8.5 animation cels, with one depicting three patriots similar to that

Unusual ballpoint signature, "Elliot See,” on an off-white 3.5 x 6.5 envelope bearing autopen signatures of his fellow 'New Nine'...

Uncommon official color 8 x 10 NASA lithograph of See in a suit and tie, signed and inscribed in black felt tip, "With best regards to Michael ...

Color satin-finish 13.25 x 10.25 photo of the Gemini 6/7 rendezvous, signed in black felt tip "Photo by Tom Stafford" and "Wally Schi...

Official color 8 x 10 NASA lithograph of Young in his silver Gemini space suit next to a rocket model, signed and inscribed in black felt tip, "...

Two small flown heatshield plug fragments from the Apollo 14 spacecraft, encased in a capsule-shaped 2.75˝ x 2.25˝ x 1.75˝ Luc

Scarce flown piece of heat shield from the Apollo 7 CSM-101 spacecraft, which launched from Cape Kennedy LC-34 on October 11 and splashed down in the

Apollo CM sextant alignment bar, measuring 22.5˝ x .75˝ x .25˝, marked in white text, "Sextant Alignment Bar," with alignme...

Apollo Command Module LiOH Filter Assembly, 7″ x 7.25″ x 5.25″, bearing an affixed Airesearch label on the side, reading:

Test-fired Rocketdyne SE-8 rocket engine for an Apollo Command Module Reaction Control System (RCS) bi-propellant thrust chamber assembly manufactured

Seventeen-set Beta cloth tool kit for the Apollo Command Module, measuring 12.25˝ x 25˝ unrolled, containing an assortment of 11 Velcr

Fantastic Block I Command Module main display panel #16 with switch banks for the "Abort System," "Reaction Control Sys," and &q...

Group of four pieces of Deep Space Network ground support hardware, including: an Apollo Ground Tracking Deep Space Network (DSN) Correlation Filter,

A stainless steel Apollo Interval Timer (also known as a two-speed timer) as used on Apollo 10–17, measuring 2.75˝ in diameter and 2

Apollo Launch Escape Tower Canard Actuator, measuring 23˝ x 8˝ x 6.5˝, with worn part numbers on the sides and bottom; the cen

Apollo Lunar Module Antenna Pitch Angle Meter, measuring 2.25˝ x 2.25˝ x 3.5˝, with a Honeywall tag on the rear portion, readi

Apollo Command Module Block I Signal Conditioner Chassis, measuring 24.75˝ x 8.75˝ x 5˝, with an Autonetics tag on the front,

Wooden mockup of the Hasselblad 500 camera with a pistol grip and a detachable mockup of a long telephoto lens, painted black with silver accents, and

Rusty Schweickart’s incredible flown brass two-celled flashlight and pair of AA batteries carried aboard both the Command Module Gumdrop and

Apollo-era Marquardt R-4D rocket engine designed for application as a Attitude Control, Reaction Control System (RCS) and primary propulsion thruster,

Apollo Command Module Environmental Control System (ECS) Component, measuring 14˝ long and 5˝ in diameter, marked on the side, "828097

Early Apollo Block II Overcurrent Sensor, measuring 3.75˝ x 3.25˝ x 3.5˝, with a Kinetics tag on on side, reading: "Overcurren

Apollo Block II Overcurrent Sensor and Transfer Switch. The early Apollo Block II Overcurrent Sensor measures 3.75˝ x 3.25˝ x 3.5

Apollo Command Module Environmental Control System (ECS) Component, measuring 12˝ long and 4˝ in diameter, marked on the side, "DWO 24

Red rubber Apollo Command Module Block II Sextant Seal Gasket, measuring approximately 22˝ x 14.5˝ x 1˝, marked on the outer e

Apollo Command Module electrical junction box for connection of wiring between multiple onboard systems, measuring 7.5 x 7.5 x 1.75, stamped on one ed

Apollo Command Module GSE (Ground Systems Equipment) pressure relief valve, measuring 4˝ x 2˝ x 1.75˝, marked on the body: "Va

Large beta cloth storage pouch utilized to stow photographic equipment in the Astronaut Preference Kit (APK), measuring approximately 19 x 23, labeled

Apollo Command Module Block II Up-Data Link (UDL) equipment measuring approximately 9 x 17.75 x 5.5, labeled “C28-1A103.” The unit h

Two glycol evaporator control electronics modules for the Apollo Command Module Environmental Control System (ECS), mounted together in a 16.5

Apollo Command Module Glycol Heater, measuring 7.5˝ x 5˝ x 4˝, with an LTV Aerospace Missiles and Space Division tag on the si

Coupling Data Unit Test Adapter, likely Apollo program affiliated, used as ground equipment, measuring 3.25˝ x 4˝ x 2.5˝, mark

Cryogenic hydrogen ground coupling used to fill the Apollo CSM's hydrogen tanks pre-launch, measuring 10˝ long with a diameter of 3˝,

Apollo Command and Service Module nitrogen tetroxide valve assembly made by Simmons Precision Products of Yorktown, New York, measuring approximately

Apollo CSM Propellant Electrical Control Unit used to regulate the flow of oxidizer and fuel in the spacecraft's propellant tanks, manufactured ...

Apollo Command Module (Block II) Data Modulator, measuring 4.25˝ x 4.5˝ x 8.25˝, with a Motorola label on the side, reading: "

Dark brown fiberglass bracket designed for an Apollo Flight Vehicle (potentially to be used on the deck plate), measuring 18.5˝ x 2.25

Rare acrylic display containing a piece of aft heat shield from the AS-201 (CSM-009) spacecraft, which launched from Cape Kennedy LC-34 on February 26

Saturn V UHF transmitter, measuring 14˝ x 5.5˝ x 3.25˝, with NASA/George C. Marshall Space Flight Center tags on two sides, in