RR Auction: Space Exploration

Program affiliation undetermined (may be Space Shuttle). Pyrotechnically actuated bolt, measuring approximately 7.5" x 4" x 4", used ...

Mass memory unit (MMU) built by Odetics, Inc., the manufacturer of the Space Shuttle Mass Memory Units that used magnetic tape. This MMU uses solid-st

Seven flexible couplings designed to join air duct tubing on the Space Shuttle, all marked with part numbers, "ME276-0024-0013, 70628713202-13 ...

Space Shuttle Orbiter umbilical connector plate that was part of the spacecraft's Umbilical Separation System and provided compartmentation betw...

Space Shuttle rotational hand controller protective cover, measuring 7.75" x 8" x 3.75", with a Rockwell International Spa...

Space Shuttle Space Suit Power Harness Assembly (Lower Arm), approximately 16" long, comprising a white cable with connectors at each end, labe...

Limited edition commemorative plaque containing a 1.75" vial of polystyrene spheres, a material manufactured in space aboard the Space Shuttle ...

Collection of 25 packages, tubes, and cans of Russian space food designed for use on the International Space Station (ISS), with cuisine including: (v

Flown Russian Poljot wrist watch carried to the International Space Station aboard Soyuz TMA-4 for Expedition 9. The watch was carried by Gennady Pada

Blue metal short duration foot restraint designed to be used on the International Space Station (ISS), 10" x 6" x 3", with a pair of ...

Pair of NASA-prepared International Space Station presentations given to Lori Garver, the former Deputy Administrator of NASA, by the crews of Expedit

Color glossy 12 x 8 photo of the three-man crew of the Soyuz TMA-11M mission, signed over their space suits in gold ink by Mikhail V. Tyurin, Richard

Mockup or Training Berkut Voskhod-era Cosmonaut backpack, 12.75˝ x 20˝ x 4.25, weighing approximately 19 pounds, con

Extraordinary prototype of the SK-1 spacesuit made by NPP Zvezda for the Vostok program, which succeeded in placing the first human into space, Yuri G

Desirable circa 1975 Salyut program leisure flight suit, designed for a cosmonaut's comfortable wear on board the Salyut space station. The two-...

Lengthy handwritten manuscript in Cyrillic by cosmonaut Anatoly Berezovoy, three pages, 7.5 x 11.25, no date. Untranslated manuscript detailing Berezo

An interesting cosmonaut pilot survival kit contained within an olive drab canvas bag, stamped on the front with part numbers, "HA3-7, 8904937....

FDC with a cachet honoring the Cape Kennedy Space Center, postmarked there on September 29, 1967, signed in blue and black ink by the first six legend

Satin-finish 8 x 10 photo of Alexei Leonov during his historic first space walk, signed in black felt tip, with Leonov adding "1st Man Walk in ...

International edition color 32 x 17.75 print of an Alexei Leonov painting entitled 'Seagull,' depicting Valentina Tereshkova in space with n...

Color satin-finish 8 x 10 photo of Valentina Tereshkova saluting an officer before her flight, with Alexei Leonov standing next to her and holding a r

Desirable 5.75 x 4 Russian postcard depicting a model of the Apollo-Soyuz spacecraft docking, signed in ink by the two Soviet crewmen: Alexei Leonov a

Official glossy 8 x 10 NASA photo of the Apollo-Soyuz Test Project cosmonauts, signed in black felt tip by Alexei Leonov and Valeri Kubasov. Reverse b

Satin-finish 8 x 10 photo of the Apollo-Soyuz Test Project cosmonauts seated with NASA astronaut Vance Brand during the mission, signed in black felt

Color satin-finish 8 x 10 photo of Valeri Polyakov observing rendezvous operations with the Space Shuttle Discovery on its STS-63 mission through a wi

Color satin-finish 10 x 8 photo of cosmonaut Pavel Popovich seated in his Vostok 4 flight suit, signed in black felt tip by Popovich, who adds his mis

Satin-finish 10 x 8 photo of cosmonaut Pavel Popovich watching a pen float in zero gravity during the Vostok 4 mission, signed in blue felt tip by Pop

Early Soviet-made circa 1970s polished metal presentation model of a Soyuz expendable carrier rocket, standing 14.75" in height and set upon a ...

Early Soviet-made circa 1970s polished metal presentation model of a Soyuz expendable carrier rocket, standing 14" in height and set upon a sto...

Unique metal-and-plastic hand-made presentation statue commemorating the Sputnik 1, the world's first artificial satellite. The statue measures ...

Unique hand-made metal presentation statue commemorating the Sputnik 1, the world's first artificial satellite. The statue measures 6.5" in...

Early Soviet music box commemorating the launch of Sputnik, measuring approximately 7.5″ x 4.5″

Rare early vintage matte-finish 7.5 x 10.75 photo of Tereshkova in her USSR spacesuit, warmly signed and inscribed in fountain pen, and dated December

Impressive collection of (7) preflight items produced as spares for the crew of Soyuz MS-19 Expedition 66—Anton Shkaplerov

Center display panel bezel for the main console of the Neptune IDS (Information Display System) of a Soyuz spacecraft, measuring approximately 7.75&...

Vintage Apollo lunar module contractor's model, made of injection-molded plastic and measuring approximately 6.5" tall and 10" across....

Highly detailed custom-made presentation model of the Luna 10 robotic spacecraft, scale 1:10, constructed of metal and resin, measuring 26â[x=

Super early 1:1 full scale model of the Planet Labs Dove (Cosmogia) satellite, measuring 23 x 7.5 x 15.75, composed of deployable Triangular Advanced

Early and uncommon contractor's model of the S-IVB, the powerful third stage of the Saturn V super heavy-lift launch vehicle. The model is compo...

Impressive full-scale polished replica of the Sputnik 1 satellite, measuring approximately 23˝ in diameter, with four whip-type radio

Impressive 1:25 scale model of a Vostok 5 rocket made by S. P. Korolev of the Energia Rocket and Space Corporation. This model is constructed of fiber

Douglas Aircraft Company contractor's model of the Manned Orbiting Laboratory rocket, measuring 9.75" long, with a black 4" x 6.25&quo...

Appealing 1:40 scale plastic model of a North American X-15 rocket plane, measuring approximately 14.5" long with a wingspan of 6.75", fea...

A General Dynamics contractor model of the SM-65 Atlas intercontinental ballistic missile developed for the United States Air Force by the Convair Div

Three small models of the Space Shuttle: a 7" long die-cast toy model of the Space Shuttle Enterprise by Ertl, with cargo bay doors that open t...

Tracking Antenna Station model by Topping Inc., made for the WDL Division of Philco, a subsidiary of the Ford Motor Company, which built ground tracki

Two models of USAF rockets: a white plastic model, measuring 11.25" long, with two thrusters and two propellant tanks at the bottom, marked &qu...

A pair of hardcover and paperback first editions of Space Cat by Ruthven Todd, with illustrations by Paul Galdone, published by Charles Scribner'...

Theodore C. Freeman's deputy sheriff badge issued by Harris County, Texas, engraved with his name on the lower tablet, "Ted C. Freeman,&quo...

Scarce 1963 North American X-15 pressure helmet visor, 10.5" x 7.5" x 7.5", with helmet mounting holes to either ear, the inner left ...

Signed book: Hypersonic: The Story of the North American X-15. Special edition limited to 200 copies. North Branch, Minnesota: Specialty Press, 2002.

Apollo Saturn V F-1 rocket engine LOX impeller spline sleeve, measuring 4" tall and 6.75" in diameter, and weighing 16.3 pounds, etched on...

Fuel boost pump unit for the Aerojet Rocketdyne RL10 liquid-fuel cryogenic rocket engine integrated into the Centaur upper stage of the Atlas-Centaur

Low impulse monopropellant hydrazine thruster assembly built by the Rocket Research Company for a satellite attitude control application, measuring ...

Unused core memory module from the Titan II SLV computer, one of two that were typically installed in the computer. The module, 6.5 x 2.75 x 4.25, fea

Disc memory featuring serial ports on the base, measuring 6" x 6.5" x 3.25", designed for use with the Autonetic VERDAN (Versatile Di...

Limited edition flown patch carried aboard the eighth test flight of the McDonnell Douglas DC-X, or Delta Clipper Experimental Vehicle, which launched

Gyroscope prototype developed for an unknown application, measuring 6.5" x 3.75" x 4", mounted on a 9.5" x 7.5" ...

NASA 2-inch RCA Quad Video Recorder built into a heavy-duty 18 x 10 x 11 case with latched lid that bears a JSC Center Property label: â

Hermetically sealed relay box assembly associated with an unidentified Rocketdyne bi-propellant liquid rocket engine, measuring 10.5" in diamet...

Sounding rocket gyroscope assembly likely affiliated with the Black Brant rocket series, measuring 7.5" long and 5" in diameter, with a Sp...

Titan II SLV accelerometer assembly, measuring approximately 1.75˝ in diameter and 1˝ tall with short wiring cables

Group of seven multilayer insulation (MLI) 'blankets' made for the High Energy Astronomy Observatory C (the third HEAO spacecraft). They pro...

Solar panel designed for the Mariner 4 Mars flyby spacecraft. The panel measures approximately 71" x 35.5" x 5.25", and contains a to...

Impressive pair of solar panels designed for the Mariner 9 Mars orbiter spacecraft. Both panels measure approximately 87" x 35.5" x 5"...

Collection of prototype and engineering model parts for Mariner 2, which became the first space probe of any country to complete a successful mission

Full-size Mariner Spacecraft propulsion module mockup displayed on a metal stand, measuring approximately 18" x 18" x 22",...

Solar panel for a Pioneer lunar orbiter probe, the type that was launched into space by the Atlas-Able expendable launch system in 1959 and 1960. The

Rare Surveyor Lunar Lander Alpha Scattering Equipment bracket, 16.26" x 12" x 4", designed as a deployment mechanism for the experime...

Atlas Rocket Intervalometer made by the American Gyro Corporation out of Santa Monica, California, designed for timing sequential events. The piece me

An early Robotic Spacecraft Omni Directional Communications antenna, measuring 107" (8.9´) in length, stamped "EOK7677R."

Large flown piece of carbon fiber from the Firefly Alpha, a two-stage orbital expendable launch vehicle launched by American aerospace company Firefly

Vintage glossy 10 x 8 contact print photograph of mankind's first image of the Earth from the distance of the moon, as taken by the Lunar Orbite...

Lightweight structural sub-assembly built for a Mariner or Ranger spacecraft, measuring approximately 36" x 12" x 22", with three att...

Monopropellant Rocket Engine designed for Satellite Attitude Control, sealed in its original deaccessioned bag with parts sheet: "Item: Rocket ...

Orbital satellite battery designed for application on orbit and hardened for the space environment, measuring 13.5" x 11" x 5", attac...

Three official NASA photos related to the Viking 1 spacecraft, which touched down on Mars on July 20 1976, becoming the first successful Mars lander i

One-of-a-kind 4GB USB drive shaped like Star Trek's Starfleet emblem, carried by Chris Boshuizen on Blue Origin’s NS-18 mi

Appealing embroidered SpaceX employee patch commemorating the Dragon C2+ flight, 3.5" x 4.5", incorporating an orange swatch of parachute ...

Attractive embroidered patch for the SpaceX Falcon Heavy Demo test flight that launched from Cape Kennedy LC-39A on February 6, 2018, measuring 5

Limited edition coin commemorating the Commercial Orbital Transportation Services mission and the SpaceX Dragon spacecraft. Nickel alloy, 44 mm, 48 gm

Original embroidered patch for the SAOCOM 1B observation satellite launched by a SpaceX Falcon 9 Block 5 rocket on October 8, 2018, from Cape Canavera

Original embroidered patch for SpaceX Crew-1, the first operational crewed flight of a Crew Dragon spacecraft, which was launched by a Falcon 9 Block

Very attractive original embroidered patch for the Starlink satellite internet constellation. The patch measures 4" in diameter and shows a Sta...

Original embroidered patch for the Sentinel-6 Michael Freilich satellite, launched by the Falcon 9 Block 5 rocket on November 21, 2020, from Space Lau

Original embroidered patch for the GPS III-4 satellite, launched by the Falcon 9 Block 5 rocket on November 5, 2020, from SLC-40 at Cape Canaveral Air

Original embroidered patch for the GPS III-3 satellite, launched by the Falcon 9 rocket on June 30, 2020, from SLC-40 at Cape Canaveral Air Force Stat

Lot of six unused SpaceX part(s) labels in blue (3) and orange (3). The smaller labels, each 3 x 2, come in pairs, with all reading: "SpaceX, S...

Set of three SpaceX "Engineering the Future" commemorative medallions distributed to employees, depicting the Falcon Heavy launch vehicle,...

Original embroidered patch for the Crew Dragon Pad Abort Test, a spacecraft test conducted by SpaceX on May 6, 2015, from the Space Launch Complex 40

Original embroidered patch for the SpaceX CRS-8 mission, a Commercial Resupply Service mission to the International Space Station (ISS) which was laun

Original embroidered patch for the Falcon 9 Flight 20, a space launch conducted by SpaceX on December 22, 2015, from the Space Launch Complex 40 at Ca

Original embroidered patch for the Falcon 9 Flight 26, a space launch conducted by SpaceX on June 25, 2016, from the Space Launch Complex 40 at Cape C

Original embroidered patch for the Iridium-1 mission, conducted by SpaceX and launched from the Vandenberg AFB Space Launch Complex (SLC) 4 on January

Original embroidered patch for the Jason-3, a satellite altimeter launched by a SpaceX Falcon 9 v1.1 rocket on January 17, 2016, from California'...

Original embroidered patch for the JCSat-14 satellite mission, conducted by SpaceX and launched on May 6, 2016, from the Space Launch Complex 40 at Ca

Original embroidered patch for the SES-8 Satellite, a geostationary communications satellite launched by a SpaceX Falcon 9 v1.1 rocket on December 3,

Original embroidered patch for the flight of SES-9, a geostationary communications satellite operated by SES S.A and contracted by SpaceX, that was la

Original embroidered patch for the flight of Thaicom 8, a Thai satellite of the THAICOM series, operated by Thaicom Public Limited Company, launched b

Beautiful original artwork by official NASA artist Chris Calle, mixed media on a 15.75 x 21.75 sheet of acrylic paper, depicting astronaut Bruce McCan