RR Auction: Space Exploration

Apollo Lunar Module Separation Sequence Controller, designed to be mounted in the Saturn V Spacecraft Lunar Module Adapter (SLA). Part of the Sequenti

Kern Switar 10mm f/1:1.8 camera lens intended for use with the Maurer DAC (Data Acquisition Camera), measuring 2.25" long and 1.75" in dia...

Ground Support Equipment associated with the Saturn V launch vehicle, part of the Control Pressure System, which provided a pressure supply and distri

Helium Regulator Assembly that controlled the flow of propellant pressurization gas (helium) as part of the main propulsion system on the Apollo Comma

Desirable Apollo Solar Particle Alert Network (SPAN) Camera, measuring approximately 11.75" x 6.5" x 11.5", with a Northridge Researc...

Apollo-Era Coincident Current Core Memory Plane, 5 x 5, which presents itself as a fascinating example of early random access memory (RAM), similar to

An Apollo-era Coincident Current Core Memory Plane, 6 x 6.25, which represents a fascinating example of early random access memory (RAM), similar to t

Apollo-era exterior cover for a High Altitude pressure suit made by the David Clark Co., and dated to January 1969. The olive drab one-piece garment f

NASA Apollo-era SCAPE (Self Contained Atmospheric Protective Ensemble) helmet from the Kennedy Space Center, marked on the sides in large numbers, &...

Apollo Lunar Module Descent Engine (LMDE) Shutoff Valve, measuring approximately 6 x 8.5 x 6.5, marked "Test Only," with engraved, "2...

Lunar Module (LM) Landing Radar Antenna Pedestal Mount and Tilt Mechanism, an essential subassembly responsible for gimbling the LM Landing Radar as t

Rocketdyne F-1 rocket engine turbine nozzle blade section, measuring 12" x 3.75" x 1.5", covered in soot from testing. The section fe...

Three protective cover assemblies for the Rocketdyne J-2 rocket engine, including: a large 10.75" red plastic closure assembly cover for the J-...

Saturn V Launch Vehicle Digital Computer (LVDC) Memory Module, measuring 6.5 x 5.75 x 5.25, produced by IBM under NASA contract number NAS 8-11561. Th

Interesting rack-mounted Saturn Substitute Control Computer, Mod. I, used at Kennedy Space Center as ground support equipment to simulate some functio

Apollo Command Module (Block I) restraint harness hardware, including two Pacific Shoulder Harness 'Reel-Safe' units ("Part No. 0101385...

Apollo Command Module (Block I) Phase Lock Oscillator built by the Bendix Corporation as part of the spacecraft's telecommunications subsystem, ...

Apollo Command Module (Block I) AC Over/Under-Voltage Assembly, measuring 17.5 x 4.5 x 7, manufactured by Autonetics. The part label identifies the pi

Apollo Command Module (Block II) Central Timing Equipment Module, measuring 8 x 5 x 6, manufactured by General Time Corporation. Stenciled in red belo

Two Apollo Command Module Sequential Control System Power Converters, measuring 3.5" x 3.75" x 2.25", both with Autonetics "Conv...

Apollo Command Module (Block II) AC Relay Box Assembly, 9.5" x 9" x 4", featuring ports marked "J1," "J2," and &q...

Apollo Command Module Environmental Control Unit (ECU) Suit Compressor Pump, measuring 8" long and 6.75" in diameter, with an Airesearch l...

Apollo Command Module Optical Sextant Liner sealed in its original packaging. The red metal liner measures 8" in diameter, with stamped part nu...

Engineering/developmental hinged storage locker closure assembly associated with the Apollo Command Module Block II, measuring approximately 6.25&qu...

Three transducers and a signal conditioner built by Whittaker Corp. for the temperature measurement system of the Apollo Command Service Module, which

Kern Switar 18mm f/1:1.0 camera lens intended for use with the Maurer DAC (Data Acquisition Camera), evidently modified by NASA for use in a particula

Kern Switar 75mm f/1:2.4 camera lens intended for use with the Maurer DAC (Data Acquisition Camera), evidently modified by NASA for use in a particula

Originating from the Apollo Program—a Saturn V Launch Control Room Computer Circuit Board. The printed circuit board measu

Apollo-era Aerozine 50 (N2H4/UDMH) fill valve assembly, measuring approximately 12.25" long and 2" in diameter, marked on the cover, "...

North American Rockwell Apollo CM Rate Gyro Calibration Kit, likely associated with the Block I Command Module. Housed in a 13" x 9&...

R-4D Reaction Control Engine purge plug, measuring 15" long, with the metal parts bearing stamped and stenciled part numbers, and a hard rubber...

Related to the Apollo Program—a RCA 110A Computer Board as used in the Saturn Ground Control System, 8.75 x 4.25, consisti

Rocketdyne F-1 rocket engine flight instrumentation armored cable assembly, measuring 24.5" long with a diameter of 1.5" at the connectors...

Saturn V Launch Vehicle Second Stage Liquid Oxygen/Nitrogen Controller Assembly, measuring approximately 5.25" x 5.5" x 2.75", marked...

Saturn V Third Stage Engine Purge Pump Control Module, measuring 6" x 4.5" x 4.25", with a George C. Marshall Spaceflight Center labe...

Saturn V Launch Vehicle Third-Stage Exploding Bridge Wire (EBW) Firing Unit, with the main box measuring 6.5" x 3.5" x 3; a longer black c...

Heat shield test block material from the 1966 Apollo Command Module, 3.75 x 2 x 2.5, bearing a small metal plaque engraved with the text: "Test...

Rare spiral-bound proposal document prepared by Raytheon Computer for the George C. Marshall Space Flight Center, entitled "Data Collector, Dis...

Attractive color 30" diameter photorealistic masonite display of the Apollo 'moonscape' emblem patch. In fine condition. Accompanied an...

An IBM gold and ceramic flat-pack integrated circuit chip, .25" x .25", contained in a Lucite paperweight display measuring 2.75" x 3...

Collection of eight swatches of Apollo Lunar Module Kapton foil obtained from the Operations and Checkout Building at NASA's Kennedy Space Cente...

Display containing small fragments from the spacecraft of each planned Apollo manned mission-Apollo 1 through 17-each approximately .5" x .25&q...

Uncommon official NASA technical note (TN D-4068) manual entitled "Qualification Evaluation of the Pitch Control Motor for the Launch Escape Sy...

Display containing small fragments from the spacecraft of each planned Apollo manned mission-Apollo 1 through 17-each approximately .5" x .25&q...

Desirable collection of 18 Beta cloth swatches, ranging in size from 5.75 x 5.5 to 14 x 15.5, all with printed color mission emblems or logos. The lar

Colorful 10" souvenir plate from the Johnson Space Center in Houston, Texas, featuring the Project Apollo emblem at center, encircled by the mi...

Group lot of six NASA booklets, five of which were published in 1963 and focus on the Mercury, Gemini, and Apollo programs, and one in 1987 that deals

Early FDC with a cachet honoring the International Geophysical Year of 1957-1958, postmarked in Chicago on May 31, 1958, signed vertically along the l

Original vintage color glossy 10 x 8 red-numbered NASA photo (S-65-30429) of Gemini 4 astronaut Ed White floating high above the Gulf of Mexico during

Original vintage color glossy 10 x 8 red-numbered NASA photo (S-65-30430) of Gemini 4 astronaut Ed White floating in space during his historic 23-minu