RR Auction: Space Exploration

Apollo Lunar Module Separation Sequence Controller, designed to be mounted in the Saturn V Spacecraft Lunar Module Adapter (SLA). Part of the Sequenti

Kern Switar 10mm f/1:1.8 camera lens intended for use with the Maurer DAC (Data Acquisition Camera), measuring 2.25" long and 1.75" in dia...

Ground Support Equipment associated with the Saturn V launch vehicle, part of the Control Pressure System, which provided a pressure supply and distri

Helium Regulator Assembly that controlled the flow of propellant pressurization gas (helium) as part of the main propulsion system on the Apollo Comma

Desirable Apollo Solar Particle Alert Network (SPAN) Camera, measuring approximately 11.75" x 6.5" x 11.5", with a Northridge Researc...

Apollo-Era Coincident Current Core Memory Plane, 5 x 5, which presents itself as a fascinating example of early random access memory (RAM), similar to

An Apollo-era Coincident Current Core Memory Plane, 6 x 6.25, which represents a fascinating example of early random access memory (RAM), similar to t

Apollo-era exterior cover for a High Altitude pressure suit made by the David Clark Co., and dated to January 1969. The olive drab one-piece garment f

NASA Apollo-era SCAPE (Self Contained Atmospheric Protective Ensemble) helmet from the Kennedy Space Center, marked on the sides in large numbers, &...

Apollo Lunar Module Descent Engine (LMDE) Shutoff Valve, measuring approximately 6 x 8.5 x 6.5, marked "Test Only," with engraved, "2...

Lunar Module (LM) Landing Radar Antenna Pedestal Mount and Tilt Mechanism, an essential subassembly responsible for gimbling the LM Landing Radar as t

Rocketdyne F-1 rocket engine turbine nozzle blade section, measuring 12" x 3.75" x 1.5", covered in soot from testing. The section fe...

Three protective cover assemblies for the Rocketdyne J-2 rocket engine, including: a large 10.75" red plastic closure assembly cover for the J-...

Saturn V Launch Vehicle Digital Computer (LVDC) Memory Module, measuring 6.5 x 5.75 x 5.25, produced by IBM under NASA contract number NAS 8-11561. Th

Interesting rack-mounted Saturn Substitute Control Computer, Mod. I, used at Kennedy Space Center as ground support equipment to simulate some functio

Apollo Command Module (Block I) restraint harness hardware, including two Pacific Shoulder Harness 'Reel-Safe' units ("Part No. 0101385...

Apollo Command Module (Block I) Phase Lock Oscillator built by the Bendix Corporation as part of the spacecraft's telecommunications subsystem, ...

Apollo Command Module (Block I) AC Over/Under-Voltage Assembly, measuring 17.5 x 4.5 x 7, manufactured by Autonetics. The part label identifies the pi

Apollo Command Module (Block II) Central Timing Equipment Module, measuring 8 x 5 x 6, manufactured by General Time Corporation. Stenciled in red belo

Two Apollo Command Module Sequential Control System Power Converters, measuring 3.5" x 3.75" x 2.25", both with Autonetics "Conv...