RR Auction: Space Exploration

Apollo A7L space suit oxygen vent pad assembly, measuring 5.25? x 1.25? x 1?, engraved on the edge with part numbers, "PN-A7LB-109011-01, PN-28...

Apollo A7LB space suit pressure relief valve, measuring 2? in diameter and 1.25? tall, engraved on the edge with part numbers, "ASSY 9334-04, S...

Extremely long Beta-cloth umbilical hose cover for the Apollo Command/Service Module, measuring approximately 122? in length, with front label marked,

Apollo Lunar Module/Command Module compressed nitrogen bottle used to help lift the spacecraft hatches, measuring 9? long and 1? in diameter, marked o

Apollo Lunar Module coldplate assembly, measuring 22.5? x 3? x 1.5?, stenciled on the front with part numbers: "Cold Plate Assy, DSGN Cont...

Red metal elbow connector produced by Air-Lock for the Apollo space suit, 3.25 x 2.75 x 1.25, marked “Not For Chamber or Flight Use” and engraved with

Blue metal elbow connector produced by Air-Lock for the Apollo spacesuit, 3.25 x 2.75 x 1.25, engraved with part numbers, “PN-4263B, SN-141.” Elbow co

Blue blanking plate, 2.75 x 1.5, designed for an Apollo pressure suit connector. In fine condition, with expected wear from use.

Unflown Apollo-era single toggle switch panel, measuring 1.25 x 1.25 x 3.25, made by Honeywell's Micro Switch Division in Freeport, Illinois. Th...

Large wound length of wire from the Lunar Receiving Laboratory, approximately measuring 5.25? in diameter, sealed within its original plastic d...