Marway Militaria Inc Auction 138

Both, 25mm size, with design of the 31st BCH on them. Both J.R. GAUNT & SONS BIRMINGHAM maker marked. Lot of 2.

Brass number 4, two lug fasteners, 20mm high.Mazeas MC13. 1910 issue.

Pair of brass number 8s, 19m high, one has two small folding fasteners (I have seen these type fasteners used on Police number and this could well be

White metal, pin fastener, original to badge. Excellent stamping. Mazeas MC21.

Two Matched pairs, Buffalo's facing, white metal, lug fasteners, SCULLY maker marked. One lug removed, but included. Mazeas MC21.

Dull orange brass Horse facing to left. Lug fasteners. Mazeas MC29. 1908 issue.

Pair, dull gold coated metal, lug fasteners, Mazeas MM266. 1909 issue

Brass metal, lug fasteners, nice stamping. Mazeas MM227. 1906 issue.

White metal, one folding lug remaining and other removed, nice stamping. Mazeas MM191. 1907 issue.

63 in Horn type. One dark brass metal mouth of horn to right, someone has attached two thumb tacks for fasteners and one dark brass metal, mouth of ho

This is one of the Regiments that wore the same sized badge for both Cap and Collars. The Lions face and the left facing was worn as the cap as well a

Matched pair, Boers Heads facing, dull gold coated brass metal, lug fasteners, large size, 44.20mm wide. Nice. Mazeas MM106. 1904-1921 issue.

. Two different strikings On dull copper bronze metal, Horse facing to left, for some reason the side to side lugs have been cut off, studs remaining,

. Copper bronze base metal with traces of brass coating remaining. Lug fasteners. Copper bronze showing on high spots due to wear. Nice stamping. Babi

Copper bronze base metal with traces of brass coating remaining. Lug fasteners. Babins E93

. Pair, brass metal, 13.12mm high, lug fasteners, both marked P.W. ELLIS CO LTD 1915 on one and no LTD on the other, on the back.

Brass metal, lug fasteners removed years ago. Beaver facing to right. Babins E25-1.

. 1 - Cap badge, dull/brass metal, maker marked TIPTAFT (Which makes me think CEF era), smooth back, lug fasteners. Shows some darkening. 1 - Collar b

2 - One, C A M C, joined at bottom, 14.11mm high x 48.11mm wide, lug fastener and one, C.A.M.C, joined at bottom. lug fasteners, 13.34mm high, by 58.8

Age darkened Brass Metal, Beaver facing to right, lug fasteners, TIPTAFT maker marked. This badge worn from 1910 to early 1920's. Babins E11-2A....

All Beaver over Maple leaf wreath with CVC letters, voided, intertwined in centre. All lug fasteners. Two different shades of brass, Beaver facing to

Both Beaver over Maple leaf wreath with CVC centre letters, these are un voided, type. Both Beaver facing to left. Lug fasteners. Dull orange brass. B

Beaver, facing left, over Maple Leaf wreath, with silver metal overlay on the CVC letters, lug fasteners. SCULLY MONTREAL maker marked. 32.88mm high b

Bright gold plated, GAUNT MONTREAL maker marked, lug fasteners, excellent condition, Beaver facing to right. Babins E11-2A.

Maple leaf with Kings Crown over Leaf wreath with CVC centre, brass metal darkened with brass showing through on high points. Lug fasteners. GAUNT Dis

All Maple Leaf type, Babins E11-2, lug fasteners, two with Gaunt maker disk on back and one without. All brass metal coated dark with brass showing du

Error type, D.S., rather than O.S. Large dark copper bronze metal Maple leaf with lug fasteners, excellent stamping. Babins E39-7.

Lot of 5. Babins E39-7. All Error type, DS rather than OS. All same design, two dark copper bronze, singles, dull gold gilt, brass, dark brass metals.

Darkened brass metal, O.S. type, lug fasteners, smooth back. Nice stamping. Babins E39-8.

All O.S. type. Same pattern, two very dark brass, pair and singles, brass metal, pin back fastener which has replaced lugs and dull gold coated, maker

Dull copper bronze metal, lug fasteners, maker marked, CARON BROS. MONTREAL 1916. Shows some wear to high points. 47.48mm high by 40.98mm wide. Babins

Brass metal, C O C, two lugs which have been flattened but still present. Maker named CARON BROS 1916 on the back. Hard to find these dated pieces.

Dark copper bronze metal, lug fasteners, excellent stamping and condition. Babins E39-5

Two matched pairs, Beavers facing. 1 - pair, dull orange brass, lug fasteners, nice. 1 - pair, right facing one brass metal and the left facing one du

. Copper bronze metal, flattened lug fasteners, nice stamping.Babins E39-5A

Two collars, beavers facing left on both, chocolate brown coating. one has single flattened lug, other removed and other one has two regular lugs, sho

Dull coated brass, lug removed, small area of green staining on left feather tip. Maker marked on back, P.W. ELLIS & CO/1918 (I think it is an 8...

Lot of 3. 1 - 24.28mm size, Copper/bronze metal, W.SCULLY maker marked. 2 - 16.79mm size, gold coated, W. SCULLY maker marked. Nice.

Brass metal, with black coating, with some areas of brass showing due to wear. This is the type with the Kings Crown over a square base, the base of t

Another square type with Crown above, the base of this is wider, 9.29mm wide, and the square, 29.13mm per side. This has clutch pin fasteners, which a

This is a different one. It is the Crown square type design, with a large Kings Crown, 8.05mm wide by 7.88mm high, mounted on a smaller square, 18.63m

The Crown over the square type, with the side of the square being 16.86mm per side and the crown being 5.04mm wide by 3.96mm high. It has the clutch p

Maple leaf shape, white metal, lug fasteners, shows some wear to high points of the crown. Looks like from the back that a centre lug has been polishe

This is the 1 3/8" x 1 1/2" size, brass metal, one lug replaced and other missing. O. B. ALLAN maker marked. Nice stamping. Babins E34-8.

C32 - No Lot

C M P, 13.50mm high letters, joined at bottom , brass metal, on back CARON BROS 1 rest covered with solder but would say WW1 issue.

All Kings Crown over CANADA banner, Men's Issue. 1 - Dull copper bronze, RODEN BROS TORONTO, lug fasteners. 1 - bright copper, flat type lugs, R...

Brass metal Maple Leaf with high raised detailed Kings Crown over CANADA banner, lug fastener, 1 3/4" high by 1 5/8" wide. Described and p...

14.67mm high, lug fasteners, dark copper bronze, maker marked on back BIRKS 1917. Quite a Scarce title. RCD.

Dull copper brass Maple leaf with white metal overlay, lug fasteners, W J. DINGLEY B'HAM maker mark, Very nicely made badge. Babins E6.