Marway Militaria Inc Auction 138

Issue 1905, to commemorate Nelson victory, marked made from copper from the Victory, loop for suspending from chain. 17.25mm across.

Lot of 2. 1 - dull gold with red enamel points to Star with two Solider wear helmets facing left, and date 1918 - 1968, folder blue, red/white/blue ba

1904 issue, Dark Orange brass metal, flat backed, replaced lugs, GAUNT 53 CONDUIT ST. LONDON maker marked. Excellent stamping and condition. Mazeas MS

GEORGE V. 1910 issue, darkened brass, lug fasteners, excellent stamping. Mazeas MS11.

Pair, dark brass metal, CANADA bottom banner, both SCULLY maker marked, 45mm high. Nice. Mazeas MS12.

C F A, brass title. Single bottom bar, lug fasteners. 19.06mm high. These large titles are attributed to the Boer War. Scarce title.

Aged Gold Wire, 7 flame grenade over CANADA banner. 1 3/4" high by 1" wide. The gold wire is aged and is padded. It is on a red cloth back...

Victorian Crown over Engineers type Coat of Arm over banner, DIEU DROIT/ET MON/UBIQUE ( holes have been drilled in the U and the E of this word, no id

Kings Crown over Maple leaf wreath with circle banner with CANADIAN ENGINEERS and Beaver centre. 1 - dull copper/bronze metal, showing some slight wea

All different patterns of the 1902 issue collars, all Beaver facing to left and voided, lug fasteners. One shiny dark brass, flat design, one dull gol

Canadian Army Service Corps, OFFICER'S Cap badge. Silver Beaver on black painted type material in a silver overlay on bright fire gilt sun burst...

All 1903 issue, different strikings, four are voided and one is solid. One has one replaced lug, rest original lugs. Brass and orange brass metal. Maz

I like to call these the Buried Crown type, MS20.most of the bottom part of the crown covered by the Sun Burst. Lug fasteners. One in orange brass and

All slight different design, all voided Crowns, all voided centers, one has one lug missing, rest have all. Eight have Beaver facing to left and two f

All Beaver centre type, NON voided Crown, Voided centre type, lug fasteners, all Beavers facing to left, different design and sizes. Different metals,

Three are matched pairs, with Beavers facing. 3 - pairs, have solid no voiding around Beavers and solid crowns and are brass metal, lug fasteners. 2 -

All 2 piece, Beaver centre types. One pair, matched beaver facing, dark bronze metal, lug fasteners. One pair matched, dark brass, with traces of gree

This is a Voided Crown, Beaver type, with Beaver facing to the left. It is a type that I haven't seen before because it has a full "BUCKLE&...

All Voided Beaver centre types. 1 - Un Hall marked SILVER metal, Beaver facing to left, voided Crown, lug fasteners, 36.60mm high by 27.05mm wide. Nev

All C A S C, joined at bottom, lug fasteners, approx. 13.53mm high, two dark bronze and three brass metal. No maker marked. Mazeas MS23 type. Lot of 5

. Letters O P, joined in middle, 19.64mm high, lug fasteners. Vendor thinks could be OBSERVATION POST and I have no idea if he is right or not. I am n

2 - white metal Maple Leaf with voided centre cross design with red cloth backing. Flat Ellis type lugs. 30.37mm high by 27.79mm wide. I have seen the

Lot of 2. Both Beaver on top of shield with bottom ORDNANCE banners. Lug fasteners. 1 - Brass, Beaver facing to left, shows wear to high points, 41.66

Heavy bronze metal, Beavers facing over shield, lug fasteners, smooth back, Guns Facing, excellent. Mazeas MS 28 type.

. 2 - brass metal, slight different patterns, both Beavers facing to left, Guns facing to left on both, one has dark green staining on it, 35.94mm hig

Brass button, 16.58mm across, with raised outer rim, Victorian Crown over Beaver with ribbon banner with QUEBEC GARRISON CLUB on it. Wear to the detai

Brass Cap badge, lug fasteners, SCULLY MONTREAL maker marked. 2 - Collar badges, same design as cap, brass metal two sizes, 36.42mm wide and other 25.

Bright silver plated, fine screw post fasteners, smooth back. Nice stamping. Mazeas CD9.

White metal, 35th HALIFAX CADET, white metal, lug fasteners. MADE IN ENGLAND (Gaunts) disk on back, shows some light dark staining should clean up eas

These are the 1st issue type, with "NO" Beaver near the Tree at top. 1909-1911 type. These where worn both a Cap and Collar badges. The ba...

1 - Lord Strathcona's Horse, Royal Canadians, cap/collar badge. Mazeas MC8 type, with "NO" Beaver on it and the words, LORD STRATHCONA...

All word STRATHCONA'S, curved down, 2 bar, 14.64mm high, lug fasteners. There are two dull gold coated metal and one light gold anodized plastic...

. I am not sure when this one was issue or worn. It is dull gold coated, showing the Gate and the banner has words, FORT GARRY HORSE, on it. Lug faste

Two, same design Gate over FACTA NON VERBA BANNER, slight different designs, one dull gold coated brass metal, lug fasteners and other different shade

Matched pair, Wolfs facing, lug fasteners, both SCULLY maker marked. The right facing one dull brass metal with some slight age darkening and the othe

1899 issue, dark brass metal, lug fastener, LAMONTAGNE maker marked, excellent. I am calling this the 1899 issue due to the area of the base of the Cr

All non voided under the Crown and above banner types. 5 - dark brass, one pair with facing Lions and three with Lion facing to left, all lug fastener

Collar badge size, Lion facing to left, bright gold plated, pin back fasteners, marked on back, HEMSLEY STERLING. Nice. Mazeas C13.

Single number 6's. 1 - 19.13mm high, lug fasteners, SCULLY maker marked. 1 - 21.89mm high, one lug removed. Both age darkened brass metal. Lot o...

Dull copper bronze metal, lug fasteners. This is the early issue with V above bottom banner. Nice stampings. Mazeas MC14. 1903-1922 issue.

. Dull copper/bronze metal, lug fasteners, Horses head facing to right, which is attached separate to the circle banner. . This issue the Cap and coll

This issue the same badge used for Cap and Collars, with the left facing Pegasus being used for the cap badge. The cap badge is dull copper/bronze met

. 1909 issue, dull gold plated metal, with white metal Bull Dog overlay. J.R. GAUNT/MONTREAL disk on the back. Beautiful well made badge as only Gaunt

2 - Matched pair collar, bull dogs facing, white metal with attached brass bottom banner, lug fasteners. J.R. GAUNT/MONTREAL maker marked. 1 - Number

Pair, brass M T D, joined at top, 14.44mm high with D being 10.69mm high. Single screw post fastener with nut. Some staining on one of the D's. ...

1910 issue, dark copper/bronze metal, lug fasteners, W. SCULLY MONTREAL maker marked. Nice stamping. Mazeas MC49.

1910 issue, matched pair with animals facing. Left facing one dull brass, stamped and right facing one dull gold brass, W. SCULLY MONTREAL maker marke

Brass metal with 31/B.C.H., voided centre. Red cloth backing to centre design. Lug fasteners, J.R. GAUNT/MONTREAL disk on the back. Piece of thin thin

Dull gold played brass, red cloth backing to 31/B.C.H., lug fasteners, J.r. GAUNT/MONTREAL disks on the back. One slightly darker than other with smal

This is the issue that the same badge worn as both Cap and Collar. This one dull copper/brass. It has three holes drilled to hold overlay which is mis