Marway Militaria Inc Auction 138

matched pair, dull gold/brass Maple leaf with white metal overlay, lug fasteners. Well made collars.

Dull brass metal on bronze with some light bronze showing on high spots, folding tang fasteners, DINGWALL maker marked. Excellent. Babins E226.

Both same design, one - dull brass coated bronze with some bronze showing due to wear, tang folding fasteners, DINGWALL maker marked, 35.21mm high by

Dull copper/bronze metal, replaced lugs, nice stampings. Babins E4-8.

Dark bronze metal, lug fasteners, nice stamping.

8 over C M R, 25.44mm high, pin fasteners. The 8 has been added to the CMR and a bar has been attached at the back to strengthen it, Scarce title

1 - 221st Battalion, Winnipeg, Sweet Heart pin. Small silver metal likeness of the 221st Badge, 10.85mm wide by 13,54mm high, attached to a 45.21mm wi

Dark copper/bronze metal, lugs replaced. Babins E4-12

Dark copper/bronze metal, flat Ellis Type lugs.

Dark brown coated, lug fasteners, TIPTAFT B'HAM maker marked. Nice stampings. Babins E4-2.

Dark brown coated metal, lug fasteners, TIPTAFT B'HAM maker marked. Nice stamping. Babins E4-2.

Brass metal, lug fasteners, nice stamping. Babins E4-6.

2 - Collars, brass metal, Moose facing to left on both, lug fasteners. 1 - Title, brass metal, C M R, 2 bar, 12.49mm high, TIPTAFT B'HAM maker m...

. Dull gold coated metal, lug fasteners that have been replaced. This is the type that the letters O, B, K, A, do not touch the leaf of the Maple Leaf

Dark copper bronze metal with one showing a little darker, lug fasteners with the lighter on missing one and the other replaced.

Dull copper/bronze metal, one lug replaced, nice. Babins E4-1.

One dark copper bronze and other dull gold coated metal, this one maker marked TIPTAFT B'HAM, lug fasteners, both Buffalo heads facing to right ...

4 - One pair, with facing Buffalo's, slight different shades pf dark copper/bronze metal, lug fasteners, smooth back and two singles, Buffalo fa...

White metal, Lion facing to right, lug fasteners, nice. Babins E8-14.

This is two type of this badge, one flat and one slightly raised detail, both brass metal, lug fasteners. The flat one is marked CARON BROS 1918 on th

2 - Collars, brass metal, lug fasteners which have been replaced on one, CARON BROS 1918 maker mark on both. 2 - Titles, C.R.G., 2 bar, brass metal, 1

Heavy age dulled frosted silver with shiny showing on the high spots. Lug fasteners, SCULLY maker marked. This could be a well made Collar for the 193

All 1927 issue, UBIQUE top banners. 1 - Dull orange brass, 3 lug fasteners. 2 - Brass metal, both with two lug fasteners, one has small area of brown

Both 1927 issue, UBIQUE banner type. 1 - Full size, Spinning Wheel type, dark brass metal which has considerable light green staining. Two lug fastene

1 - UBIQUE banner, Kings Crown, brass metal, lug fastener, nice. 2 - Shoulder badges, Gun shape, both guns pointing to right, brass metal, lug fastene

Flaming grenade, UBIQUE banner type. Four matched pairs, two lugs each. 2 pairs, approx. 40mm high, different shades of brass. 2 pair, 45mm high, I wo

1 - pair, brass metal, lug fasteners, 25.54mm high. 1 - pair, dark bronze, looks like the banner have been removed, lug fasteners, 35.38mm high. 1 - b

All matched pairs, 2 bar, lug fasteners. 2 - pairs, RCHA, all brass metal, 14.69mm high. 3 - pairs, RCA, one 14.72mm high and 4, 14.40mm high. Lot of

All Kings Crown over Coat of Arms design. All approx. 1 5/8 wide by 1 1/2" high. 1 - dark bronze metal, lug fasteners, excellent detail except ...

All the 10 flame, large grenade type, with UBIQUE banners. I would say worn after WW1. All approx. 1 7/8" high. These I am told worn by OFFICER...

Geo. VI issue, marked R for RODEN Bros, maker on back. Nice stamping and condition. Mazeas S3a.

Collar badges, brass metal, 10 flame grenades, UBIQUE bottom banner, lug fasteners, one has green staining, 1 3/8" high. 4 - Titles, all RCE. 2...

Cast brass metal, with white metal overlay, which has been attached slightly off the brass backing. Brass shows slight wear to high points. Dark blue

All Kings Crown RCCS types. Lug fasteners. 1 - Officers, dull orange brass, voided crown. colored enamel flags, 3 bar white and blue to left and blue

1 - C.C.of S, 2 bar, brass metal, 12.87mm high, lug fasteners, SCULLY made. 2 - SIGNAL, joined at bottom, 13.20mm high, lug fasteners, one showing sta

Brass title, S C R, joined at bottom, 13.73mm size. Not sure what this stands for. The vendor feels, Signal Corps Radio. It was shown on the British B

Both Crossed Flags, with the plain flag to the left on both. One dull gold, smooth back, 4 lugs and one brass metal, four lugs with one having been re

1922 issue, brass metal, GEO V Cap badge. Some green staining on Crown and left side. Slider fastener. Damage to the top left sun ray, looks almost li

Both GEO VI issue, brass metal, different stampings, lug fasteners, the smaller one shows some wear to high points and the larger one has dark green s

1922 issue, Geo V., brass metal, the lighter brass metal one shows wear to the GVR centre design, hard to find collars. Mazeas S5.

All brass metal, GVIR, voided centers, lug fasteners, four pairs or very close. Two have green staining.Lot of 8.

1 - Pair, GVIR voided centre, smooth back, non voided Crown, lug fasteners, dark bronze metal. 1 - Dull bronze metal, voided Crown, GVIR voided centre

Heavy Silver metal. Marked STERLING on the base with heavy GR RCASC, Crown overlay. Pin back fastener. 26.09mm wide by 26.74mm high. Marked STERLING o

Kings Crown, silver colored metal base with dull Gold banners GVIR centre with blue enamel on the circle motto banner and red enamel at back of GVIR.

R C A S C, lug fasteners. 1 pair, brass, 13.16mm high. Singles, 3 - 13.17mm high, brass, gold plated, bright silver plated. 1 - 10.47mm high. 2 - 9.12

1 - Cap Badge, Kings Crown, brass metal, lug fasteners. 2 - Collar badges, brass metal, both have snake facing to the left, lugs. 1 - Collar, dark bro

2 - Matched pair, snakes facing, dark copper bronze metal, pin fasteners. 2 - Matched pair, snakes facing, dull, darkened gold gilt with darkened fros

No Lot D26

King Crown silver metal overlay centre, slider fastener which has the letter C stamped on it, R.C.A.V.C. bottom banner. Dull orange brass. Heavy well

Very similar to the D27, with slider and letter C on it, same metal, Seems a little light but could be my imagination, Another nice Hard to find badge

. All brass metal with silver/white metal overlay, facing to left. One SCULLY maker marked, all have lugs with one having had the lugs removed an repl

1 - brass metal, figure facing to right, one piece no overlay doesn't appear to have had one, Flat Ellis type lugs. 1 - Officer's, dark bron...

Pair of collar, letters V A, white metal, intertwined on a bronze bade with bottom banner, CAVC COTC CONTINGENT. Lug fasteners, 23.72mm high by 27.51m

Both dark bronze metal. One has regular lugs other had rectangle shaped with pin hole. Nice pieces.Mazeas S10 Lot of 2.

Three bronze metal, dull copper bronze, and brass metal. Lot of 5. All Mazeas S10 type.

One OFFICER'S, heavy bronze metal, folding tang fasteners, excellent. 1 - bronze metal, lug fasteners which have been flattened, SCULLY made. 1 ...

Cast brass metal, one lug removed and other removed using lots of solder. Mazeas S10b.

Pair dark bronze metal, Officer's, lug fasteners, SCULLY Montreal maker marked. 1 - Heavy gold plated, lug fasteners. Lot of 3. Mazeas S10b.

No Lot D37

Brass metal, 16.97mm high, lug fasteners. Looking up on the computer this was the only idea of what the RDC stood for from the British Badge Forum, (t

1922 issue, brass metal. The Cap badge has green staining and needs to be cleaned, slider fastener. Pair collars, Matched with Guns facing, the one wi

1 - Age darkened dull Gilt with blue enamel backing to banner and red enamel backing to centre shield. One lug removed and other bend over but present

1 - Brass metal, silver plated, with some brass showing due to wear, home made slider fastener replaces lugs. 1 - brass metal, with antique brass coat

2 - Brass metal, one shows heavy wear, slider replaces lugs and other excellent, lugs. Mazeas S14. 1926 issue.

1 - Pair, gun facing, OFFICER'S, dark bronze, lug fasteners, one SCULLY marked. 1 - Pair, guns facing, darkened brass metal, lugs, some light gr...

1 - brass metal, C O C, 14.02mm high, lug fasteners. 2 - RCOC, brass metal, 14.16mm high, lug fasteners. 2 - Gold plated, RCOC, 8.75mm high, one SCULL

Copper/bronze metal, 3 shield type, 1944 issue, SCULLY maker marked, lug fasteners. Mazeas S15.

1 - Dull gilt, OFFICER'S, SMALL Crown type, smooth back, SCULLY made, lug fasteners, excellent. 3 - LARGE Crown, flat Ellis type lugs, dull copp...

Three shield type, 1944 issue, pair of Officer's collars. Gold Wash on the Kings Crown of both, with a pin back fastener on both. Both hall mark...

Rearing Horse design. 1 - Cap badge, brass metal base with white metal overlay, lug fasteners, SCULLY disk on the back, shows some age but still nice.

Cap, age dulled Gilt with age darkened Silver beaver overlay, lug fasteners, excellent stamping and condition. 2 - Collar, matched, Beavers facing, Gi

Kings Crown Cap badge, dull gold gilt metal, silver Beaver, looks like a single lug fasteners has been replace and that it has a slider at one time. N

3 matched pairs, Beavers facing. One pair, Antique Brass, lug fasteners. One pair, Silvery plated, lug fasteners. One pair, light gold plated, lug fas

Cap and two pairs of matched collar badges. Cap is brass metal, lug fasteners, and one pair collars yellow brass and other dark brass, lug fasteners,

Kings Crown Cap Badge, white metal, lug fastener, pair collars, white metal lug fasteners, two shoulder titles, C-INT-C, one white metal and other chr

Cap, brass metal, lug fasteners. 3 - collars brass metal, one matched pair, Beavers facing and one Beaver facing to the left, lug fasteners. 2 - Shoul

1932 issue, Kings Crown, brass metal, coated in black, with brass showing due to wear. SCULLY MONTREAL maker marked don back. Lug fasteners. Excellent

Pair, dark coated bronze material, with traces of bronze showing due to wear on high points. Lug fasteners. Mazeas S17.

Dark coated bronze metal with some bronze showing due to wear. Slider fastener. This is the British issue of this badge, worn by the Canadian. It is t

Kings Crown Chaplain Corps medallion, with green enamel Cross arms and center design, IN THIS SIGN CONQUER,motto, with wreath leaf, on gold plated 8 p

Dull copper/bronze metal, lug fasteners, 1939 issue, (Same badge worn since they where formed pre 1914), flat Ellis type lugs, nice stamping. Mazeas S

3 - Copper/bronze metal, lug fasteners, with one set of lugs being flattened, nice stamping. 1 - dull brass metal, lug fasteners. 1 - bright gold plat

. 2 - brass, C P C, 13.72mm high, lug fasteners. 2 - R C P C, 10.11mm high, lug fasteners, brass metal. Lot of 4.

One dull gold gilt material, Officer's I would say, lug fasteners, SCULLY marked and one brass metal flat Ellis type lugs.Lot of 2. Mazeas S20.

4 - dull copper bronze metal, lug fasteners. 2 - Antique brass, OFFICER'S, excellent stamping and condition, one SCULLY marked. Lot of 6. Mazeas...

Brass Cap badge. Matched pair, Lions facing, collar badges, darkened brass metal, both BIRKS maker marked. 3 - cloth shoulder flashers, one dull gold/

1 - Cap, brass metal, lug fasteners, BIRKS maker marked. 4 - Collar, all Lion on Kings Crown over banner type, all facing to left (Never have seen one

All C PRO C, 9.68mm high, lug fasteners, three brass and one gold plated. Lot of 4.

Dark brown BAKELITE material, lug fasteners. Excellent condition. Mazeas S24.

Heavy flat backed metal COPIES of the original cap badges. Lug fasteners. One silver coated, two brass metal. One lightly scratched on the back, 1 CDN

All same, silver coated Parachute/banner overlay on coated base. Three have slider fasteners and stamped on the slider words, OSONS LONDON and one has

dark copper brass metal, slider fastener, one piece, 44.21mm high by 44.02mm wide. English made and not issued during the War. Mazeas S24a type.

All heavy, solid backed, screw post fasteners with no nuts. All marked on back SCULLY LTD/MONTREAL. 43.17mm high by 42.92mm wide. Two silver plated an

All have a FIST overlay. All clutch pin fastener. All have a stamp on back, Helmet, SCULLY LTD/MONTREAL/STERLING .These are all COPIES and and the Ste

Lot of 3. 2 - Canvas, 1/CANADIAN PARACHUTE/BATTALION, curved up, white on maroon with green border, black backing. 1 - Cloth, 1/CANADIAN PARACHUTE/BAT

4 - Dull yellow side wings, with white parachute and Red Maple Leafs, all padded, all show some age dulling, one has Silver metal Maple Leaf attached

Mazeas S24b. Red thread Arrow Head design, with edge border and words U S A over C A N A D A, white gauze type cloth backing, slight glue and paper re

2 - Crossed arrows, gold plated, 1 1/2" x 7/8" high, clutch pin fasteners. The narrows have 7 feather's on each side. Present day USA ...

One dark copper/bronze, lugs have been replaced with clutch pin fasteners, full size, 2" x 1 1/2", the other is a brighter copper, lug fas...

2 - Pair, collars, dark copper/bronze, lug fasteners, nice. 2 - Shoulder titles, INF, single bar at bottom, 13.21mm high letters, W. SCULLY MONTREAL o