The Premiere Firearms Auction of the Year.

Complete with original Colt wood grain box and papers. BBL: 4 1/4 inch round Stock: Gauge: 45 ACP Finish: blue Grips: walnut Serial Numbe

This lot consists of two complete Colt Commercial Conversion kits with boxes and one Colt/Ace military conversion kit slide grays. The kits consist of

Only a limited number of this model were produced. Marked "PYTHON TARGET / 38 SPECIAL CTG" on the left side of the barrel and the one lin...

Introduced in 1955, reintroduced in 2001 and discontinued in 2005. Matte finish on top of rib and top strap, satin finished stainless steel with pinn

Features a serrated ramp front and adjustable rear target sights, six-shot cylinder, wide serrated target hammer and smooth trigger. Fitted with two-p

Introduced in 1955. Reintroduced in 2001 and manufactured until 2005, high polished blue finish with high visibility ramped front sight and white out

Manufactured from 1966 to 1986. Standard Colt markings and features including a serrated front ramp sight and adjustable rear target sight, full lug b

Manufactured circa mid to late 1960s. Fixed sights, serrated hammer and trigger, 6-round fluted cylinder, un-shrouded ejector rod, and checkered grips

Produced between 1955 and 2005. Marked "PYTHON 357/*357 MAGNUM CTG* on left side of barrel and one line address on right, pinned front and adju...

A) Manufactured between 1985 and 1987, this model was designed as a duty type weapon with target capabilities. Standard barrel markings, blade front s

A) Satin finish stainless steel with matte finish top of rib and flat top strap, pinned ramp front sight with red insert and white outline adjustable

Manufactured in 1978, this Colt Python revolver has pinned blade front and adjustable rear sights on a vent rib barrel with a matte finish on the top

Manufactured in 1974. This revolver has pinned blade front and adjustable rear sights on a vent rib barrel with a matte finish on the top strap. BBL

Standard markings and features including adjustable rear sight , checkered target hammer, serrated trigger. Complete in the original "wood grai...

Standard barrel and frame markings, ramp front sight with orange insert, adjustable rear sight, Colt Royal blue finish and fitted with two piece wrap

Introduced in 1990, features a front ramp sight with red insert and an adjustable white outline rear sight. Serrated hammer and trigger. BBL: 6 inch

A) Produced from 1949 to 1952. This revolver has a high ramp front sight and adjustable rear "Coltmaster" sight. The top and bottom of the...

Manufactured in 1975. Blade front and adjustable rear sights, with checkered hammer, standard markings, serrated trigger and backstrap. With the origi

Features a 4-position adjustable blade front and adjustable rear sights. Ribbed barrel marked "SMITH & WESSON" on the left, and "...

Manufactured 1970. Standard markings and features including a serrated front ramp sight, adjustable rear target sight, full lug barrel, wide target ha

A) The left side of the barrel is marked "1776 - U.S.A. BICENTENNIAL - 1976". Loading assembly, frame and hammer are all casehardened. The...

Introduced in 1955, only a limited number of this model was produced. Marked "PYTHON TARGET /38 SPECIAL CTG" on left barrel and the one li...

Produced between 1955 and 2005. Satin finished stainless steel, marked "PYTHON 357/*357 MAGNUM CTG*" on left side of barrel and one line a...

Manufactured in 1964. Pinned blade and adjustable sights on a matte finished vent rib and top strap. Standard barrel markings with the Rampant Colt on

Still considered the flagship of the Colt double action line, matte finished on top of vent rib and flat top strap, ramped orange insert front and whi

A) This 1st Issue was manufactured in 1966 with standard markings and features and fitted with checkered walnut grips with silver Colt medallions. B

Introduced in 1955 and discontinued in 2005. Matte finish on top of rib and flat top strap, high polished blue with pinned red ramp front and white ou

A) Features front and rear side serrations a lowered and flares ejection port and BoMar sights. Frame runs the length of the slide and features an amb

Marked "BAER/CUSTOM" on the left side of slide and "TR SPECIAL" on the right, address and serial number above trigger on right o...

This is an excellent, like new, example of a Wildey Semi-Automatic pistol. These are a massive design that fires an extremely powerful cartridge. Thes

Marked "BAER/CUSTOM" on right side of slide and "45 ACP" on left, with address and serial number on right side of frame. Matte ...

Features an adjustable rear sight, front and rear slide serrations, a match barrel, ambidextrous safety, a lowered and flared ejection port and bevele

Features front and rear side serrations a lowered and flares ejection port and BoMar sights. The frame runs the length of the slide and features an am

Features a six inch barrel and slide with an adjustable rear sight, front and rear slide serrations, lowered and flared ejection port and a match barr

Manufactured from 1984-1999. Equipped with red ramp front sight and adjustable rear sight with white outline, serrated hammer and trigger, extended ma

This rare and unusual special order Randall Roman short sword has Model 2 styling with a giant blade measuring 13 1/8 inches long and 2 inches wide. T

This Randall miniature knife has a 3 1/2 inch blade marked with the scimitar flanked two line Randall address and curved brass guard. The micarta hand

Produced in the early 1970s, this special order Randall bolo knife has a 7 inch blade marked with the scimitar flanked Orlando address making. Brass f

6 inch long double edged blade that is 1 2/5 inches wide at the base. The blade has the two line scimitar flanked Randall marking on the left side and

The Model 12-8 Bear Bowie Knife was originally a custom design for a big game hunter that later entered the catalog. The quarter-inch stock blade is 8

6 inch long carbon steel blade with 4" sharpened back clip. The blade has the standard two line Randall marking, with dual quillion nickel stee...

Derived from an earlier WWII-era Randall knife design, this knife was reintroduced in limited numbers for the RKS. 8 inch long carbon steel blade, wit

This is an extremely rare Randall Miniature Model 12 Bear Bowie knife. The blade is 3 3/8 inches long etched with the W.D. Randall signature and marke

This bowie knife was made by Randall for Nordic Knives, a supplier of custom and high end blades. The design of this knife is similar to the Model 12-

This early 1960s production Randall Model 4 knife has a 7 inch carbon blade marked with the standard two line Randall address. Finger groove stag hand

Produced in Orlando, Florida, 5 1/2" blade, nearly a quarter-inch thick at the spine, with sharpened false edge and scimitar flanked "RAND...

1) 1984 Randall bowie knife with a 7 inch blade marked with the scimitar flanked two line Randall Orlando address. The slightly turned down guard and

This early 1970s produced Randall Special Model 24 Guardian has a 4 inch blade, nickel silver hilt and laminated rosewood fishtail handle. The blade i

Current production Model 14 with 7 1/2 inch blade marked with scimitar flanked Orlando address, brass guard, and finger grip micarta handle. OAL: 12...

1) This rare Randall miniature Model 18 knife has a 3 1/2 inch blade with sawteeth and is marked with the two line scimitar flanked Orlando address ma

Reintroduced in limited numbers for the Randall Knife Society (RKS), this knife is derived from an earlier WWII-era Randall knife design. This knife h

1) Randall dagger, 8 inch spear blade with scimitar flanked Orlando address marking, slightly turned down brass guard, micarta handle. OAL: 12 3/4&q...

This folding knife was handcrafted by the late Arkansas Master Knifemaker James B. Lile. One of the most influential knifemakers in the world, Lile i

This is a Number 37 folding knife fabricated by Ron Lake. Selling his first knife in 1966, Ron Lake has become one of the most sought after knifemaker

This folding knife was handcrafted by master knife maker Michael Walker with scrimshaw scales and engraved bolsters by his wife Patricia Walker. In th

Both knives in this lot were fabricated by award winning knife maker C. Gray Taylor. 1) Folding knife with a 3 1/2 inch long blade marked "C. G...

This dagger was handcrafted by custom knife maker Willie Rigney. Now retired, award winning knife maker Willie Rigney created some of the finest and m

This is a spectacular example of a gold inlaid and engraved Damascus dagger handcrafted by Michael Veit of LaSalle, Illinois. Blade magazine has call

Producing custom knives for over 25 years, Fred Carter has established himself as one of the industry's most renowned knifemakers. He has held t...

This dagger was handcrafted by Willie Rigney. Now retired, award winning knife maker Willie Rigney created some of the finest and most detailed pieces

Over the past 25 plus years, Fred Carter has established himself as one the industry's most renowned knifemakers of his generation, and is the s...

Now retired, award winning knife maker Willie Rigney created some of the finest and most detailed pieces of his generation. His knives were generally

This Damascus dagger was handcrafted by the late Master Knifemaker Sid Birt who was a Knifemakers' Guild member and known worldwide for his qual...

This dagger was handcrafted by Ronald A. Frazier. Frazier is an award winning member of the Knifemakers' Guild for over 30 years. This Frazier d...

Handcrafted by award winning member of the Knifemakers' Guild Ronald A. Frazier, this dagger features an 11 1/2 inch blade marked "R.A. FRA...

This knife was fabricated by Jim Sornberger who is a Knifemaker's Guild member from Volcano, California and is known for using a variety materi...

This dagger was handcrafted by Jim Hardenbrook. It features a 7 5/8 inch blade marked "-JLH-", Hardenbrook's early mark. Slightly turn...

This is an example of a Curt Erickson handcrafted dagger that is engraved and gold inlaid by his wife Julie Warenski-Erickson. Curt Erickson began cra

This dagger was handcrafted by Fred Carter in 1984. Over the past 25 plus years, Fred Carter has established himself as one the industry's most ...

Jim Ence has handcrafted knives that have been compared to the craftsmanship of his long time friend and neighbor legendary knife maker Buster Warensk

This is an example of a Damascus knife handcrafted by knife maker Ronald A. Frazier, an award winning member of the Knifemakers' Guild for over ...

This is an example of a dagger handcrafted by Buster Warenski. For those in the custom knife making industry Buster Warenski needs no introduction. He

Handcrafted by award winning member of the Knifemakers' Guild for over 30 years, Ronald Frazier. The dagger has a Damascus keris style blade mea...

Jim Ence has handcrafted knives that have been compared to the craftsmanship of his long time friend and neighbor legendary knife maker Buster Warensk

Handcrafted and engraved by Gary R. Blanchard, this dagger features a 4 5/8 inch blade. Both sides of the ricasso feature a leaf engraving with &quo...

This knife was handcrafted by Master Knifemaker Tai Goo. In a career that started in 1978, Tai Goo has established himself as a world renowned neo-tri

This Japanese inspired knife was fabricated by J.A. Harkins who has been handcrafting knives for over 20 years and specializes in automatics. The knif

1) Handcrafted by J.A. Harkins, this tanto has a 4 1/4 inch blade marked "J.A. HARKINS". Silver front bolster. Nicely figured hardwood sca...

This knife was handcrafted by respected former member of the Knifemakers Guild, American Custom Gun makers Guild and President and founding member of

This lot consists of three art edged weapons handcrafted by Master Knifemaker Tai Goo with each signed by the artist ("GOO"). The three ed...

This stunning Damascus dagger was fabricated by Willie Rigney and engraved and gold inlaid by Julie Warenski. Now retired, award winning knife maker W

This spectacular dagger was fabricated and embellished by Gary R. Blanchard. Blanchard started in the knife making business as a scrimshander in the 1

Handcrafted by Jim Ence, this dagger features a 6 inch Damascus blade with the flat surfaces having a relief gold plated leaf engraving on a punch dot

This knife was handcrafted by legendary knife maker Herman Schneider. The knife features a 5 1/2 inch blade marked "H.J. SCHNEIDER / -MAKER-&qu...

This knife was handcrafted by legendary knife maker Herman Schneider with a Thomas Lamb designed utility handle, circa late 70s early 80s. The knife h

Handcrafted by the legendary knife maker Herman Schneider, this knife has a 3 3/4 inch blade scripted marked "H. J. Schneider / No-8". Art...

Producing custom knives for over 25 years, Fred Carter has established himself as one of the industry's most renowned knifemakers. He has held t...

This knife was fabricated by J.A. Harkins who has been handcrafting knives for over 20 years and specializes in automatics. This knife has a fixed 4 1

Master Knifemaker Joe Kious is known for producing some of today's finest folders and automatics and many in the industry consider him to be one...

Jim Ence has handcrafted knives that have been compared to the craftsmanship of his long time friend and neighbor legendary knife maker Buster Warensk

This is an example of a Tom M. Kopp handcrafted dagger. Tom M. Kopp began his knife making career in the late 1980s, and today specializes in classic

This dagger was handcrafted by custom knife maker Cris W. Dahl. The dagger features an 8 1/2 inch Damascus blade marked "CRIS W. DAHL / maker&q...

This is an example of a Tom M. Kopp handcrafted dagger. Tom M. Kopp began his knife making career in the late 1980s, and today specializes in classic

This knife was handcrafted by master knife maker Ronald A. Frazier. Ronald A. Frazier has been an award winning member of the Knifemakers' Guild...

This knife was handcrafted by Richard Essegian, who specialized in fancy working knives of his own design. The knife features a 3 3/4 inch blade marke

This boot knife was handcrafted by Ted M. Dowell who is rated as one of the best knifemakers in the early days of the Knifemakers' Guild. He was...

This knife was handcrafted by legendary knife maker Herman Schneider. The blade is 3 7/8 inches long and is marked "H.J. SCHNEIDER / -MAKER-&qu...

This knife was fabricated by J.A. Harkins who has been handcrafting knives for over 20 years and specializes in automatics. This primitive looking Har

1) A folding knife with a 2 3/4 inch blade marked "SF". File work on the blade spine and blade release mechanism. Silver bolster with stag...

This knife was handcrafted by Australian Knifemakers' Guild member and New Zealand resident Bill Reddiex. The blade is 7 1/4 inches long and is ...