Rock Island - Premiere Collector's Firearms Auction

This factory laser engraved revolver was custom built for the 2012 Pietta Single Action catalog (see page 15). It is chambered in .45 Long Colt and f

Manufactured in 1983 with Patridge front and adjustable rear sights. Smooth walnut grips with Ruger medallions. This model was only manufactured for t

This factory laser engraved and high polish nickel finish Single Action revolver was featured in the 2012 F.LLI Pietta Single Action Catalog (see page

This revolver was custom built for the 2012 Pietta Single Action Catalog (see page 15). This revolver chambered in .45 Long Colt is specially designe

Manufactured in 1984 with ramp front and adjustable notch rear sights. Smooth rosewood grips with Ruger medallions. This model was only manufactured f

Ramp front and adjustable notch rear sights, serrated hammer and trigger and smooth walnut grips with Ruger medallions. With box, papers, 1 extra 44 m

Manufactured in 1986 with Ramp front and adjustable notch rear sights, smooth walnut grips with Ruger medallions, smooth trigger and serrated hammer.

Manufactured in 1980 with ramp front and adjustable notch rear sights, smooth trigger, serrated hammer and smooth walnut grips with Ruger medallions.

Manufactured between 1981 and 1983, each 10-X was hand assembled by a High Standard gunsmith, using select parts for maximum quality. Patridge blade f

Barrel lug is marked "DAN WESSON ARMS/357 MAGNUM CTG" and the frame is marked with the Monson, Mass. address. Fixed ramp and notch rear si...

Manufactured between 1908 and 1918. The right side of the chamber block is marked "CALIBERS - 22&44, the right side of the frame "PATE...

This high grade competition target pistol was discontinued in 1988. Adjustable front and rear sights with the detachable magazine loading from the top

Introduced in 1963. Ramp blade and adjustable notch sights, with standard markings and a checkered stock with black plastic tip and white diamond acce

This fine revolver features a ramp front sight with red insert and adjustable rear sight with standard markings. Long checkered hammer, smooth stain

Blade front and adjustable notch rear sights with matching serial number on the frame, slide and barrel. The left side of the frame is marked "...

One of less than 250 produced circa 1955-1958, the Kimball was a failed attempt at producing a blowback pistol in 30 Carbine, using a series of cut ri

Fixed front and adjustable rear sights, chambered for the .50 Action Express, barrel bushing muzzle brake, serrated trigger, serrated thumb safety, se

This is a very scarce model in that it retains the tangent rear sight, no back strap slot and carries only the serial number on the front grip strap,

This is an extremely rare, unusual pistol that resembles a pen or a small flashlight when it's closed. The pen pistol is an emergency defense we...

Barrel is fitted with a two-piece, 12 port compensated sleeve which has the low blade front sight. It has a Bo-Mar adjustable rear sight, serrations o

Manufactured with a fixed front and adjustable Kimber rear sights, serrated trigger, checkered slide release, checkered magazine release, serrated amb

Manufactured in 1990. This pistol features a factory floral scroll engraving on the frame with gold scrolling on slide. It has fixed white dot sights,

This Luger is a special edition "One of 25", this being number 10. Equipped with a gold blade front sight with traditional tangent rear si...

This pistol was manufactured as part of a limited edition series of only 25. Features full coverage, hand engraved oak leaf and acorn pattern. The sli

This Knight's Cross of the Iron Cross is a limited edition of 100. It features oak leaf and acorn engraving along the majority of the frame and ...

This collectable pistol is 19 of 500 manufactured. Fixed front and rear sights on the gold plated slide featuring extensive engraved leaf design patte

Standard features with 9mm Luger stamped on the barrel. An American Eagle over the chamber. "INTERARMS" import markings on right side of b...

Standard features with 9mm Luger stamped on the barrel. American Eagle markings over the chamber. "INTERARMS" import markings on right sid...

As manufactured in the United States in the late 1970s/1980s, this pistol features an all stainless steel construction, with fixed orange dot front an

One of 228 manufactured in Belgium and assembled in Portugal. The gun has gold accented stationary front and rear open sights with a round serrated go

The pistol has a tangent sight and a slotted back strap, with checkered grips. The left side of the slide has the two line maker marking and the trigg

Manufactured in Belgium between 1962 and 1974. Patridge style front sight, adjustable rear sight, with a serrated gold trigger. Mounted with a nicely

Long bull barrel Buck Mark Silhouette design with hooded front sight moved back and hooded rear sight on a Weaver scope mount base rib. Fitted with fi

Three dot sights on a stainless steel slide. Decocker/safety and wraparound textured grip with Browning logo. Complete with plastic Browning case, loc

This High Power was manufactured in 1962 with fixed front and rear sights. With checkered walnut grips, serrated round hammer, safety, and slide stop,

Introduced in 1987 and manufactured in the United States. Hooded front and hooded adjustable rear sight with standard markings. Fitted with a finger g

Manufactured in Belgium, this pistol features Patridge blade front and adjustable rear sights on the blue slide with very fine scroll engraving with a

Manufactured in 1974 with fixed sights and a gold washed trigger. With Browning soft case and instruction booklet. BBL: 4 5/8 inch round Stock:

This pistol is equipped with a tangent sight and the back strap is slotted for a shoulder stock. The left side of the slide has the two line maker mar

Manufactured in Belgium and assembled in Portugal. Stationary front and rear sights, ambidextrous safety. Smooth trigger with serrated spur hammer. Fi

Late production "T" series with tangent rear sight and non-slotted back strap. Manufactured in 1968, this pistol is one of 7,000 imported ...

Manufactured in 1993 with a fixed front and tangent rear sight, ambidextrous safety and checkered walnut grips. With gray plastic Browning case number

Manufactured in Belgium between 1962 and 1974. Patridge style front sight, adjustable rear sight, and a serrated gold trigger. Mounted with a nicely f

Early post-war pistol, with fixed sights, checkered grips, and serrated round hammer. The left side of the slide has the three line FN commercial mark

This is number 8 of only fifteen experimental titanium-framed models ever produced. It features adjustable Millet sights, adjustable trigger, long gri

This pistol was introduced in 1996 with a limited availability of about 2,000. This pistol is very similar to the U.S. Government contract pistol deve

Manufactured in Belgium. Fixed front and adjustable target rear sights. Standard markings and features on blued slide. Fitted checkered walnut grips.

This pistol has a serrated trigger, serrated slide stop, serrated safety, serrated hammer, wide beavertail grip safety, fixed front sight, adjustable

These are the last "T" series marked HP's, that were produced in the late 1960's early 1970's as manufactured in Belgium. Thes...

Introduced in 1981 and manufactured with fixed sights, an extended thumb safety and an extended slide release. Fitted with smooth walnut grips. With b

Produced as a similar pistol to the Colt Gold Cup .45 ACP. Features adjustable Millet sights, adjustable skeletonized trigger, long grip safety, and c

Manufactured in 1995 for "The American Historical Foundation". Top of the slide marked "The Golden Centurion". With two magazine...

Manufactured in 2005 with fixed white dot sights, with "THE SECOND DECADE 1985-2005/BERETTA U.S.A. CORP. - ACCOKEEK,MD" marked in gold on ...

Features include a Bo-mar adjustable rear sight, barrel compensator, reverse plug, long slide stop release, large magazine release, magazine well and

Introduced in 1997. Fixed front sight and adjustable rear sight on a "KH (antler)" proofed slide and decocker/safety with a barrel weight ...

Right side of frame marked with "United States/Central Command" and "Desert Storm/16 January 1991 - 11 April 1991". With box num...

Introduced in 1990. Features fixed white dot front and white outlined rear sights and textured Glock grips. Comes with speedloader, cleaning rod, bore

Features include fixed sights, an extended thumb safety, beavertail grip safety and checkered rubber grips. BBL: 4 inch round Stock: Gauge: 45

Limited edition of 1,000 and manufactured in 1981. This revolver has gold highlights on both sides of the barrel, the cylinder, both sides of the fram

Manufactured with the standard markings and features of this model, including smooth walnut grips with gold Colt medallions. With wood Colt case lined

Standard markings and gold etching of the Sam Colt commemorative revolver. One-piece smooth walnut grips. Includes the factory supplied oak display bo

Manufactured in 1963 with the standard markings and features of this commemorative, including smooth walnut grips with gold Colt medallions. With a wo

This collection consists of 14 mostly Colt books such as: R.L Wilson's "The Book of Colt Firearms" and "Blue Book Pocket Guide fo...

This is an excellent example of one of the massive Freedom Arm's "Premier Grade" revolvers, chambered in the extremely powerful .454 C...

This Single Action Army revolver commemorates milepost 501 of the limited edition, 802 revolvers manufactured for each milepost of the Trans-Alaska Pi

1 black Foursome; 2 modern Colt counter signs; 5 Colt stamps; 1 red and black onyx ColtRock 4 1/2 inch Jarrette; 1 walnut ColtRock 4 1/2 inch Jarrette

1 Mountaineer 6 inch knife with black handle, sheath, red velvet cover and box; 1 CT30 folding knife with box; 1 set of gold filled 1911 cuff links wi

This is an example of a massive pistol, firing an extremely powerful round. The 500 WE was designed for serious handgun hunting. The cartridge was des

Manufactured between 1994 and 2009. With blue plastic Colt case numbered to the gun, cable lock, and papers. BBL: 5 1/2 inch Stock: Gauge: 45 L

Manufactured with the standard markings and features of this model including simulated ivory grips with gold Colt medallions. With wooden Colt case li

Fixed high ramp front sight with adjustable rear sight on the flattop frame. Top of the barrel features the standard one line address, while the frame

Manufactured in 1979 as 1 of 3,000. Standard markings and features, in a locking, glass topped display case with 6 inert cartridges and a Buntline pla

This Colt/Winchester commemorative revolver features gold floral scroll etched patterns on the barrel, with "COLT" on the left side and th...

1) Colt "Pipe-A-Dor" pipe stand/humidor, brown Coltrock construction, 8 7/8 inches across with 7 pipe holders labeled "MONDAY" t...

Grouping includes 2 boxed knives, a Victorinox/Waterman knife and pen set, 3 sterling silver button covers, a pair of cufflinks, 4 belt buckles, one r

This collection of 18 books contains books such as: Sheldon's "Colt's Super. 38: The Production History", Clawson's "Colt...

Manufactured in 1979 as 1 of 3,000. The top of the barrel is marked with one line address, "NED BUNTLINE COMMEMORATIVE" on the left, and &...

Introduced in 1998 as a replica of the Single Action Army Revolver with a transfer bar safety. The Bowie knife has a 9 1/4 inch blade with stag handle

Introduced in 1998 and manufactured in the U.S.A. Fixed sights on a blue barrel with a standard casehardened frame with Colt logo on right side under

This revolver was manufactured in 1964 and has the standard markings and features of the Colonel Colt Sesquicentennial. Complete with hardwood display

Manufactured in 1973. 1873-1973 Centennial with standard Colt Centennial markings and features including a boxed "LLC" cartouche on the le...

Manufactured in 1964 with standard markings and features of the Nevada Centennial .45 Single Action Commemorative revolver. Complete with a plain card

Manufactured in 1969 with the standard markings and features of this commemorative. Fitted with simulated ivory grips with gold Colt medallions. Compl

Standard markings and features of the Florida Territory Sesquicentennial with two commemorative hardwood cases, one protective cardboard sleeve, origi

Manufactured in 1977. This pistol was the vision of former Colt employee Al DeJohn who was a WWII veteran and former manager and designer of Colts Cus

This pistol is marked with the Rampant Colt behind the slide serrations on the left side and "EXPERIMENTAL No 2" on the right side of the ...

Original Colt Government Model 1911 pistol custom finished in 24 Karat gold plate by the American Historical Foundation with the right side of the sli

Manufactured in 1970, as part of the transition to the Series 70 1911's. Only about 1,000 of the "BB", (barrel bushing) marked guns we...

Manufactured from 1970 to 1983. Blade front sight, adjustable Elliason rear sight, adjustable skeletonized trigger, serrated hammer and checkered waln

Standard slide markings, high profile three dot sights, combat hammer, grip safety, and textured neoprene grips with black and red Delta logo medallio

Manufactured from 1946 - 1969. Fixed sights. Slide features both a matte and polished finish with standard markings. Serrated spur hammer with serrate

Manufactured in 1982 at the Colt Custom Gun Shop. This pistol features an adjustable Colt Elliason rear sight, fixed front sight, and adjustable skele

Manufactured from 1957 to 1970. Fixed front sight with adjustable rear sight and a skeletonized serrated adjustable trigger. Standard markings with a

Introduced in 1983. Fixed front sight with adjustable rear sight and a skeletonized trigger. Standard markings and features fitted with black rubber g

Patridge front sight and an adjustable rear sight. Slide marked with the "ACE" diamond on the right and left side with a Colt logo on the ...

Manufactured in 1970 as 1 of about 1,000 produced as part of the transition to the Series 70's. The serial number is marked on the right side of...

Manufactured circa 1961. Features standard slide markings with a Patridge blade front and adjustable target rear sights. Skeletonized trigger has an a

Reintroduced in 1978 and manufactured until 1982. Blade front and adjustable rear sights with the standard Ace markings. Polished finish on the flat s

Manufactured in 1980 with the standard slide and frame markings, fixed sights, Colt marked barrel and fitted with checkered walnut grips with gold Col

Introduced in 1983. Standard markings and features including fixed sights. Serrated spur hammer, serrated trigger, and fitted with checkered Colt wood