RR Auction: Space and Aviation

Apollo Command Module LiOH Filter Assembly, 7.25? x 7.25? x 5.25?, bearing an affixed Airesearch label on the side, reading: “Absorber Element CO2, Pa

Group of valves and quick disconnect sensors for the Apollo Command Service Module, ranging in size from 1.5? x 4.25? to 4.5? x 4.5?, including: a tra

Apollo Command/Service Module electronics package, measuring 6? x 3? x 4?, with a parts tag on the top, reading: "Item Name: Electronics Packag...

Apollo Constant Wear Garment (CWG) electrical harness, approximately 18? in length, consisting of three blue anodized metal connectors made by Air-Loc

Display electronics for an Apollo Guidance Computer (AGC) Ground Support Test Set, measuring 23.5? x 11? x 3.5?, manufactured by Honeywell for North A

Dark brown fiberglass bracket designed for an Apollo Flight Vehicle (potentially to be used on the deck plate), measuring 18.5? x 2.25? x .25?, marked

An Apollo Ground Support Lifting Fixture for an Inertial Measurement Unit (IMU) designed and manufactured by AC Electronics Division, GMC, measuring a

Manual disconnect for the propellant fill line of the Apollo Lunar Module's descent propulsion system, measuring 14.5? long with a diameter of 2...

Apollo Ground Support PSA (Power Server Amplifier) Test Point Adapter designed and manufactured by AC Electronics Division GMC, measuring 15? x 11? x

Blue anodized cover made by Airlock, Inc. for the feedport assembly on the Apollo space suit helmet, measuring 1.75? in diameter, identified as &quo...

Attractive limited edition relic display entitled "From the Ground Up—To The Moon," numbered 34/69, consisting of a .75 x .25 segment of b...

Apollo Lunar Module Latching Propellant Valve complete with wiring, sealed in pink-hued plastic, measuring approximately 6? x 5? x 2?, with a wraparou

Apollo Mission Control Biomedical Processing Display manufactured by Shelly Associates and the Philco-Ford Corporation, measuring 9.5? x 7? x 11.5?, w

Apollo Lunar Module Control Panel #8 with most electrical umbilical cables to rear intact, measuring 31.25? x 8? x 11.5?, marked on the re...

Collection of six titanium core stem tubes designed for use with the Apollo Lunar Surface Drill (ALSD) to take long samples of lunar soil, plus one ca

Kern Switar 180mm f/1:4.5 camera lens intended for use with the Maurer DAC (Data Acquisition Camera), measuring 6.25? long and 2? in diameter, engrave

Extremely rare Ground Support Equipment RCA-110A Launch Computer Core Memory Module, 8? x 10.25? x 5?, bearing an affixed Radio Corporation of America

Highly displayable early Apollo program pressure helmet, approximately 9.5 x 11 x 12, consisting of a transparent bubble, a feed port, a vent pad and

Apollo Saturn Exploding Bridge Wire (EBW) Firing Unit, the main box measuring 6.5? x 3.5? x 3?, with an attached black 36? length of cable. The top of

Apollo Saturn V J-2 Engine Propellant Feed Line, measuring 18? tall and 8? in diameter, featuring an interesting design with two bellows sections that