RR Auction: Space and Aviation

Flown postal cover carried to the International Space Station aboard the Georges Lemaitre ATV cargo resupply spacecraft on July 28, 2014, and returned

Flown 4 x 4 embroidered patch for the International Space Station Zarya Module and Space Shuttle Endeavour (STS-88), affixed to a color glossy 14 x 10

Collection of five flown flags representing the United States, Canada, Japan, Belgium, and Russia, carried on the International Space Station in 2009

Scott Kelly's flown prescription eyeglasses from his historic yearlong flight on the International Space Station from March 27, 2015, to March 1...

Flown and retrieved Space Shuttle Solid Rocket Booster (SRB) from the aft-side skirt from the mid-1980s. This booster separation motor (BSM) measures

Metallic crawler engraved nameplate, 5 x 2.5, issued to “Neil F. Lampson, 1982,” and featuring the Lampson company logo. This nameplate was formerly a

Development Flight Distributor Unit similar to one that flew as the main payload on shuttle mission STS-1. Unit measures 16 x 8 x 16 and weighs approx

Early Space Shuttle time code generator by Gulton Industries, measuring 6 x 6.5 x 3.5, with a label reading: "Time Code Generator, Model DST 22...

Early Aydin Vector "Freq. Div. Wideband" multiplexer, 11 x 6 x 4.5, with various inputs and outputs on one side, and a label on the opposi...

Original light fixture from the famous Launch Pad 39A Fixed Service Structure (FSS) at the Kennedy Space Center. This metal light fixture, which appro

Extremely heavy unexpended Space Shuttle solid rocket booster and launcher platform hold-down post, measuring 31.5? in length and 3.5? in diame...

An early Space Shuttle Orbiter ground support flash evaporator flush control panel, measuring 26 x 20 x 24 closed, which opens to reveal a control pan

A large flown-used segment of Shuttle Orbiter main gear tire from an unknown mission, measuring approximately 14 x 10 x 16, marked "Scrap"...

Large flown segment of insulated blanket affixed within a propulsion device covering from an unidentified Space Shuttle Orbiter mission. The insulatio

Rack-mount McDonnell Douglas interface unit, measuring 19 x 15 x 4, bearing a MDSCC parts tag on the reverse, reading: "Part No. 9007290-1H, Mo...

A fully intact IPS (Instrument Pointing System) and PEA (Payload Electronics Assembly) possibly flown-used on a Shuttle OV Spacelab module during the

A "Cast Premelt Controller" likely used for one of the metals and alloys experiments conducted on Spacelab, measuring approximately 7 x 9 ...

Two pieces of Space Shuttle shock absorber material for a flown Space Shuttle Solid Rocket Booster hold-down post of Launch Pad 39. One piece measures

Used Space Shuttle Solid Rocket Booster (SRB) aft separation bolt from Launch Complex 39, measuring 5.5? in diameter and 6? tall, likely dating to the

Used Space Shuttle Solid Rocket Booster (SRB) separation nut from Launch Complex 39, measuring approximately 5.5 x 3.25 x 4, marked on the side: &qu...