RR Auction: Space and Aviation

Apollo Command Module (Block II) junction box for connection of wiring between multiple onboard systems, measuring 7.5 x 7.5 x 1.75, with an attached

Black electronic component with 23 pins on one side, 3.75 x 1.75 x 1.5, stenciled in white text, “Gimbal Servo, Amplifier, 2007114-021, ACSK 89.” In f

Collection of ten rotary knobs intended for use on the MDC (Main Display Console) of the Apollo Command Module MDC, eight of which measure 2? in diame

Apollo Command Module sextant ablative cover in two pieces: one piece, still sealed in its plastic, measures approximately 11? in diameter and 2.75? t

An original Bell Aerosystems oxidizer tank made for the Apollo Command/Service Module, measuring approximately 12? in diameter and 30? tall, with the

Apollo food preparation water unit, measuring approximately 8.5 x 11.5 x 12, with an Airesearch parts tag affixed to the reverse, reading: "Res...

Amazing light blue Apollo-era EVA molded latex boot sole, measuring approximately 13.75 x 3.5 x 6.25, with wide horizontal tread lines each .25? deep,

The two main parts of the Apollo Lunar Module Modular Equipment Storage Assembly (MESA) locking and deployment mechanism. The locking and deployment m

An original large Bell Aerosystems oxidizer tank made for the Apollo Lunar Module's Reaction Control System (RCS), measuring approximately 12? i...

Apollo Command Module (Block II) Master Events Sequence Controller (MESC), measuring 8.5 x 13 x 13, bearing the original Autonetics parts tag, reading

Large beige-colored 'spider beam' unit from a Saturn IB rocket. The curved and corrugated panel approximately measures 99 x 27, and is signe...

An Apollo/Saturn-era UHF RF assembly, measuring 14 x 5.5 x 3.25, bearing blue George C. Marshall Space Flight Center labels on two sides, reading: &...

Rare collection of eight thermal protection system components in various geometric shapes, with five consisting of honeycomb patterns redolent of unab

Very early pre-Apollo left-handed pressure glove made by the International Latex Corporation. The glove consists of leather and a coating of a neopren

Magnificent large light fixture from the famous Launch Pad 39A Fixed Service Structure (FSS) at the Kennedy Space Center. This large and heavy metal l

Rocketdyne J-2 Fuel Turbopump Assembly used on the Saturn IB and Saturn V launch vehicles. The assembly approximately measures 31 x 31 x 20.5, and fea

Liquid Oxygen First Stage Tanking Cabinet from Launch Complex 36B, which was first installed in 1962 and removed August 2005, used for a total of 76 A

Small clear plastic LM protective cover with a Velcro swatch affixed to the reverse, 2 x 1, bearing black text reading, “Remove Before Flight, LDW420P

Group of five white plastic Lunar Receiving Lab moon rock secondary sample containers, each measuring about 1.25? in diameter and 2.75? tall, sealed i

Enormous stoplight-style pad status light structure from Cape Canaveral Air Force Station Launch Complex 14, measuring approximately 28 x 46 x 28, use