RR Auction: Space and Aviation

Untranslated ANS in Cyrillic written by Yuri Malenchenko to Aleksandr Volkov while aboard the International Space Station during Expedition 46, one pa

Flown Soviet commemorative cover, 6.5 x 4.5, with a handsome color cachet honoring the Sputnik satellite, postmarked October 4, 1977, signed in Cyrill

Flown Soviet commemorative cover, 6.5 x 4.5, with a vibrant launch cachet, signed in various colored ink and felt tip by the crews of Soyuz 35, 36, 37

Handwritten letter from Gennady Padalka while aboard the International Space Station during Expedition 31/32 and delivered to earth via the crew of TM

Flown Russian commemorative cover, 8.5 x 4.25, with a cachet honoring the Soyuz TMA-16M mission, postmarked in Baikonur and on board the ISS, March 27

Handwritten letter from Maksim Surayev while aboard the International Space Station and delivered to earth via the crew of STS–129. The letter, signed

Flown American flag carried aboard the Space Shuttle Enterprise, 5.75 x 4, affixed to an 11 x 14 “Special Award—Approach and Landing Test Program” pre

A possibly used-flown ERNO-Spacelab coldplate support structure of a Shuttle Orbiter Vehicle's payload bay area, measuring 26 x 29.5 x 6, bearin...

Record-setting cosmonaut Gennady Padalka's flown Omega Speedmaster Professional wristwatch, serial number 77754951, used on the International Sp...

Record-setting cosmonaut Gennady Padalka's flown pressure pants with cuffs, used during Expedition 43/44 on the International Space Station. The...

Flown postal cover carried to the International Space Station aboard the Georges Lemaitre ATV cargo resupply spacecraft on July 28, 2014, and returned

Flown 4 x 4 embroidered patch for the International Space Station Zarya Module and Space Shuttle Endeavour (STS-88), affixed to a color glossy 14 x 10

Collection of five flown flags representing the United States, Canada, Japan, Belgium, and Russia, carried on the International Space Station in 2009

Scott Kelly's flown prescription eyeglasses from his historic yearlong flight on the International Space Station from March 27, 2015, to March 1...

Flown and retrieved Space Shuttle Solid Rocket Booster (SRB) from the aft-side skirt from the mid-1980s. This booster separation motor (BSM) measures

Metallic crawler engraved nameplate, 5 x 2.5, issued to “Neil F. Lampson, 1982,” and featuring the Lampson company logo. This nameplate was formerly a

Development Flight Distributor Unit similar to one that flew as the main payload on shuttle mission STS-1. Unit measures 16 x 8 x 16 and weighs approx

Early Space Shuttle time code generator by Gulton Industries, measuring 6 x 6.5 x 3.5, with a label reading: "Time Code Generator, Model DST 22...

Early Aydin Vector "Freq. Div. Wideband" multiplexer, 11 x 6 x 4.5, with various inputs and outputs on one side, and a label on the opposi...

Original light fixture from the famous Launch Pad 39A Fixed Service Structure (FSS) at the Kennedy Space Center. This metal light fixture, which appro

Extremely heavy unexpended Space Shuttle solid rocket booster and launcher platform hold-down post, measuring 31.5? in length and 3.5? in diame...

An early Space Shuttle Orbiter ground support flash evaporator flush control panel, measuring 26 x 20 x 24 closed, which opens to reveal a control pan

A large flown-used segment of Shuttle Orbiter main gear tire from an unknown mission, measuring approximately 14 x 10 x 16, marked "Scrap"...

Large flown segment of insulated blanket affixed within a propulsion device covering from an unidentified Space Shuttle Orbiter mission. The insulatio

Rack-mount McDonnell Douglas interface unit, measuring 19 x 15 x 4, bearing a MDSCC parts tag on the reverse, reading: "Part No. 9007290-1H, Mo...

A fully intact IPS (Instrument Pointing System) and PEA (Payload Electronics Assembly) possibly flown-used on a Shuttle OV Spacelab module during the

A "Cast Premelt Controller" likely used for one of the metals and alloys experiments conducted on Spacelab, measuring approximately 7 x 9 ...

Two pieces of Space Shuttle shock absorber material for a flown Space Shuttle Solid Rocket Booster hold-down post of Launch Pad 39. One piece measures

Used Space Shuttle Solid Rocket Booster (SRB) aft separation bolt from Launch Complex 39, measuring 5.5? in diameter and 6? tall, likely dating to the

Used Space Shuttle Solid Rocket Booster (SRB) separation nut from Launch Complex 39, measuring approximately 5.5 x 3.25 x 4, marked on the side: &qu...

Seldom-seen flown upper-half section of a Space Shuttle Solid Rocket Booster (SRB) blast container. The heavy dome piece approximately measures 10.5?

Extremely long Shuttle/Solid Rocket Booster (SRB) drogue parachute suspension lines, with markings reading, "P/N 5603-501, Date of Mfr. Feb. 19...

Unused fully intact Space Shuttle Solid Rocket Booster (SRB) pilot parachute complete with canvas lanyards. Stenciled on the outside of the bag is &...

Retrieval floatation support device designed to recover a Space Shuttle Solid Rocket Booster (SRB). The large bright orange float approximately measur

Available to US bidders only. Two items: a Shuttle TCS payload bay blanket, most likely flown, #V070-366505-016, measures 11 x 3.5, and is labeled “Sc

Interesting gas flow meter built by engineers at Marshall Spaceflight Center and used in Space Shuttle testing, measuring approximately 7 x 11 x 6, wi

Shuttle-era EVA disposable Urine Collection Device (UCD), manufactured by Boeing, with an identification patch sewn to the device, reading: "It...

Stacked United States Air Force countdown clock displays, measuring 19 x 7.5 x 19, with an affixed red label on the front, reading, "Property o...

Large gold-colored Space Shuttle fibrous bulk insulation blanket from a flown Orbiter during the mid-1980s (mission not known), measuring approximatel

Large white name panel with blue "Spacehab" lettering, for use in the Shuttle Orbiter cargo bay module, 44 x 18, featuring numerous swatch...

Huge 7-foot long padded white staging area bag for a Spacehab module of the Shuttle Orbiter, measuring approximately 7´ x 3´ x 1.5´, ...

Uncommon Raychem Corporation spool of HTTMS markers used on a Space Shuttle Orbiter Spacehab module. The yellow spool measures 14? in diameter, and fe

Huge 7-foot long padded brown stowage assembly unit bag for a Spacehab module of the Shuttle Orbiter, measuring approximately 7´ x 3´ x 1....

A large metal ceiling mounted soft stowage tray possibly used-flown on a Spacehab Module or Shuttle Orbiter, measuring 17 x 30.5 x 3, with six white V

Off-white station hardware from the Spacelab of a Space Shuttle Orbiter. The hardware approximately measures 14.75 x 11.75 x 5.25, and features two ma

Two flown tribology experiment drawers used on the first Spacelab mission, STS-9, contained within two large white wooden crates. One is marked on the

Flown American flag carried aboard the Space Shuttle Columbia on STS-1, 5.75 x 4, affixed to an 8.5 x 11 presentation certificate bearing pre-printed

Two items: a series 1985 A one dollar bill signed in black ballpoint by John Young; and an official color semi-glossy 10 x 8 photo of Guenter Wendt, s

Desirable flown New Jersey state flag carried aboard the Space Shuttle Endeavor on STS-108, 5.75 x 4, affixed to a large display along with a flown Ne

Set of four 5.25 x 4 cargo bay cards flown to the International Space Station: the first two cards were flown to the ISS aboard STS–121, designated as