RR Auction: Space and Aviation Auction

Early design of the Apollo Lunar Module Ascent Engine Injector Plate, measuring approximately 13 x 13.5 x 4.75, engraved on the edge with part numbers

Rare Apollo Lunar Radioisotopic Heater canister, measuring 3? tall and 3? in diameter, mounted on a wooden 6 x 6 base, bearing a label reading, &quo...

Pair of Saturn V Exploding Bridge Wire (EBW) Pulse Sensors, measuring 4.75 x 2.25 x 1.75, both identified with NASA George C. Marshall Space Flight Ce

Saturn Helium Control panel, 19 x 19.5 x 17.5, labeled at the bottom of the front panel, "S–IV B Helium Control," and identified on the ba...

Impressive Rocketdyne Saturn V F-1 engine LOX turbopump oxidizer inlet closure, approximately 21? in diameter, featuring two desiccant cups, a turbopu

Saturn V Launch Vehicle Digital Computer, 6.5 x 5.75 x 5, with chipboards and ribbons to each of the six sides, and bottom frame labeled as "CP...

Apollo A7L spacesuit oxygen umbilical hose. Flexible hose measures almost six-feet long and features two 1.5? diameter rubber hoses feeding into a sin

Massive, one-of-a-kind Birns and Sawyer Omnitar 1000mm f/4.5 telephoto camera lens commissioned by NASA in 1964 and produced by Astra in Germany. The

Exceptionally desirable A6L space suit lunar boot developed by suit manufacturer International Latex Corporation (ILC), measuring approximately 13.5?

Blue anodized metal arm bearing produced by Air-Lock for the Apollo space suit, measuring 5.5? in diameter and 1.75? thick, engraved on the edge with

Blue anodized metal valve knob produced by Air-Lock for the Apollo space suit, measuring approximately 1 x 1.25 x 1.5, engraved with part numbers on t

Blue anodized metal dust cap made by Air-Lock, measuring 1.5? in diameter and 1.25? tall, engraved around the edge, "Assy A7L-101006-05, SN-134...

Metal glove-side connector believed to have been used as a prototype or for some specific testing during the development of the Apollo space suit, mea

Large beta cloth storage pouch utilized to stow photographic equipment in the Astronaut Preference Kit (APK), measuring approximately 19 x 23, labeled

Pair of original 14 x 17 X-ray photographs of an Apollo EVA glove, each showing the glove from a different angle. In fine condition. These X-rays have

Apollo Constant Wear Garment (CWG) electrical harness, measuring 18.5? long, consisting of three blue anodized metal connectors made by Air-Lock attac

Unused Apollo fecal containment bag, 8.5 x 15, labeled: "By Dilectrix Corp. for Fairchild, Republic, OW/WMS Collection Unit, P/N 115D402104-101...

Iconic blue anodized metal locking electrical connector produced by Air-Lock for the Apollo space suit which provided the electrical circuit wiring to

Gold anodized metal connector produced by Air-Lock to be compatible with the A7L space suit and utilized in conjunction with the Apollo Lunar Module,

Apollo space suit internal electrical connector with battery pack and signal conditioner mock-up, featuring a weighted two-inch square wooden block to