RR Auction: Space Exploration

Lunar Module (LM) Landing Radar Antenna Pedestal Mount and Tilt Mechanism, an essential subassembly responsible for gimbling the LM Landing Radar as t

Rack-mountable Discrete Output Control panel from Kennedy Space Center, measuring 19è x 10.5èåÊx 4

Apollo Saturn V F-1 Rocket Engine Turbine End Bearing Support Red Rubber Closure, circa 1970, measuring 19è in diameter, featuring th

Saturn V Second Stage Hydraulic Engine Actuating System (EAS) used as engineering test hardware, weighing 144 lbs and measuring 28è x

Shutoff valve assembly built by Fairchild Hiller for the cooling system of the Saturn V Third Stage, measuring approximately 6.5è x 8

Saturn V Launch Vehicle Third-Stage Exploding Bridge Wire (EBW) Firing Unit, with the main box measuring 6.5" x 3.5" x 3; a longer black c...

Apollo Command Module (Block II) AC Relay Box Assembly, 9.5" x 9" x 4", featuring ports marked "J1," "J2," and &q...

Apollo Command Module Optical Sextant Liner sealed in its original packaging. The red metal liner measures 8" in diameter, with stamped part nu...

Protective closure assembly for the Rocketdyne J-2 rocket engine's oxidizer valve, measuring 8è in diameter and 2è t

Apollo SE-8 Reaction Control Thruster Solenoid, measuring 2.5è x 2.5è x 1.5è plus attached wiring h

Apollo-era Aerozine 50 (N2H4/UDMH) fill valve assembly, measuring approximately 12.25" long and 2" in diameter, marked on the cover, "...

R-4D Reaction Control Engine purge plug, measuring 15" long, with the metal parts bearing stamped and stenciled part numbers, and a hard rubber...

Saturn V Third Stage Engine Purge Pump Control Module, measuring 6" x 4.5" x 4", with a George C. Marshall Spaceflight Center label o...

Significant bracket-bound manual from the MIT Instrumentation Laboratory entitled "R-547, Guidance System Operations Plan, AS-278, Vol. I, CM G...

Fascinating early concept drawings of the Apollo program‰Ûªs iconic Command/Service and Lunar Modules by NASA engineer Willar

Important draft of a Manned Spacecraft Center internal note entitled "Apollo Mission Techniques: Techniques Description, Lunar Landing Mission,...

Incredible, executive-grade lucite Apollo Saturn V rocket model containing segments of Kapton foil, thermal foil, Beta fabric, and heatshield, all att

Two sealed packages of Apollo-era space food, both approximately 3.5 x 13.5, with instruction labels marked as ‰ÛÏChocolate P

Super desirable pairing of covers signed by the moon-walking astronauts of the Apollo 11 and 17 missions, the first and last men to walk on the lunar

Official bracket-bound Rocketdyne copy of the engine acceptance report for F-1 Rocket Engine Serial No. F-0697, 9 x 11.25, dated September 11, 1969. E