RR Auction: Space Exploration

Space Shuttle Disposable Wet Trash Bag Assembly used to dispense trash bags on the Orbiter, measuring approximately 18.5? x 7? x 2.5?, featuring a par

Pair of left- and right-footed Boot Sizing Insert Toe Cap Assemblies for Space Shuttle EMU Boots, each measuring approximately 11? x 4.5? x 3.5?, mark

Sought-after pairing of Space Shuttle-era 4000 Series Extravehicular Mobility Unit (EMU) Restraint Glove Assemblies, with both left and right gloves m

Partial Space Shuttle Extravehicular Mobility Unit (EMU) suit upper arm assembly, with pair of heavily worn tags sewn outside the cuff, reading: &qu...

Blue Space Shuttle lumbar pad, measuring approximately 13? x 10? x 1?, with an ILC Space Systems tag on the front: "Item: Lumbar Pad, Part No. ...

White Multi-Purpose Cure In Place Ablator Applicator (CIPAA) sack, measuring approximately 23? long and 18? in diameter, with a tag sewn at one end:...

Insulated thermal blanket designed to protect the Nikon F3 camera used during EVAs by Space Shuttle astronauts, measuring approximately 8.5? x 6? x 2?

Large Space Shuttle nose landing gear tie, measuring approximately 29.5? in diameter and 7.5? wide, marked on the front, "Michelin Air," a...

Omega Speedmaster Professional X-33 analog-digital watch for use on the Space Shuttle, featuring a 41mm titanium case on a standard black Omega bracel

Space Shuttle Personal Preference Kit (PPK) made of white Nomex, measuring 6? x 9?, with a parts tag on the front: "P/N SDD12100370-301, S/N 50...

Rare right-handed Phase VI Space Shuttle glove restraint layer, with parts tag sewn on the back of the hand: "Item: Rest. Assy., Phase VI, Part...

Sought-after Phase VI Space Shuttle glove TMG (Thermal Micrometeoroid Garment), with two ILC-Dover tags on the interior, reading: "Item: Phase ...

Reinforced-carbon carbon (RCC) panel designed for the Space Shuttle, 6? x 6? x .25?, marked on an edge: "No. 34, Plate 3." Includes a mani...

Olive green zip-up sleeping bag assembly, approximately 68? in length and 25.5? in width, with head and arm holes, a swatch of loop Velcro to right ch

Two "Pallet Clasp" assemblies designed to secure the sleeping bag on the Space Shuttle, each measuring 3.25? x 8.5?, with part number labe...

Space Shuttle astronaut headrest pillow cover, measuring approximately 21? x 11.5?, bearing a sewn-on parts label: "Headrest Pillow, V669-00207...

Space Shuttle Solid Rocket Booster (SRB) recovery beacon, measuring 4.25? x 4? x 3.5?, housed in a white case, with a Micro Electronics, Inc. label, r

Two items: a Space Shuttle Solid Rocket Booster (SRB) location aid transmitter, measuring 4? x 2.5? x 1.25?, with a United Technologies parts tag on t

Space Shuttle Space Suit Power Harness Assembly (Lower Arm), approximately 16? long, comprising a white cable with connectors at each end, labeled as

Lightweight aluminum stowage tray made by Intercontinental Mfg. Co. of Dallas, Texas, designed to fit in a stowage locker on the Space Shuttle's...