RR Auction: Space Exploration featuring Apollo 11

Apollo Block I Overcurrent Sensor, measuring 4? x 3.75? x 3?, with a Planautics Corp. tag on the side, reading: "Switch, Power Transfer, Motori...

Early Apollo Block II Overcurrent Sensor, measuring 3.75? x 3.25? x 3.5?, with a Kinetics tag on on side, reading: "Overcurrent Sensor, Ser 044...

Pair of two metal Apollo Command Module Block II seatbelt brackets with brown nylon straps, each measuring approximately 2.5? x 7?. The attached reinf

Late model Apollo Command Module electrical wiring cover used to protect cables routed throughout the spacecraft, measuring 4? x 7? x 1.5?, marked on

Apollo Command Module Flight Simulator Repeater, measuring 12? x 8.5? x 8? and weighing 37 pounds, with a Marshall Space Flight Center/Bendix Corp. la

Gold-colored Apollo Command Module Main Hatch Pressure Cylinder Clamp, measuring 2? x 1? x .5?, used to secure the hatch actuator's pressurized ...

Apollo Command Module Prototype Beta Cloth Bag and Pad, comprising: a prototype Beta cloth bag with snap closure, measuring approximately 24? x 9?, ma

Pair of two unusually shaped Apollo Command Module Prototype Beta Cloth Bags, comprising: one bag measuring approximately 12.75? x 13?, marked inside:

Apollo Service Module Block II Thermal Insulation Blanket sealed in plastic, folded to 10? x 13? x 3?, marked on the side with part numbers: "V...

Apollo Command Module Glycol Heater, measuring 7.5? x 5? x 4?, with an LTV Aerospace Missiles and Space Division tag on the side, reading: "Wat...

Apollo Coupling Data Unit Test Adapter used as ground equipment, measuring 3.25? x 4? x 2.5?, marked "CDU Test Jack Adapter" across the fa...

Apollo Command/Service Module Cryogenic Fan Control System, measuring 7? x 4.5? x 2?, with a tag on the top reading: "Box Assembly Cryogenic Fa...

Pair of two Apollo Command/Service Module Helium Disconnects, each measuring approximately 6? long and 1.5? in diameter, both sealed in plastic. The P

Apollo CSM LM Helium Pressure Regulator, measuring 8? x 5? x 2.25?, with a wraparound Fairchild Hiller/Stratos tag, reading: "Regulator-Propuls...

Apollo CSM SPS Cryogenic Hose used in the propellant pressurization system (helium), comprising several flexible braided metal hoses connected via sti

Apollo Leak Calibrator used to measure the leakage detectors of the pressurized system in the Command Module, measuring 8.5? x 10.5? x 4.25?, with a N

Six pieces of prototype hardware designed by Pratt & Whitney for the Apollo Lunar Excursion Module (LEM) Fuel Cell, comprising two electrode fra...

Test prototype of an Apollo Saturn Propulsion Valve, measuring 10? x 10? x 8?, the body bearing a black engraved parts tag, and several stenciled test

Apollo Spacecraft DC Power Convertor, measuring 3.5? x 5.5? x 3?, featuring several stenciled part numbers and an attached NAA S&ID tag, reading...

Apollo Saturn Exploding Bridge Wire (EBW) Firing Unit, the main box measuring 6.5? x 3.5? x 3?, with an attached black 36? length of cable. The top of