RR Auction: Space & Aviation

Uncommon stainless steel tool for draining propellant from the Lunar Module tanks. Measuring approximately 4.5 x 7, the tool consists of a coupling to

Red metallic Lunar Module “Remove Before Flight” protective cover measuring 9.75 x 3.25, which reads, “Remove Before Flight LDW420-10113-7.” In fine c

Helium Leak Detector and battery pack, model A7-119, serial no. F/S 013. The detector is comprised of a 12? hand-held meter with a pistol grip affixed

Kennedy Space Center memory port. Board measures approximately 17 x 16.5 and retains its components and circuitry. Label affixed to one edge reads, in

PRD Electronics Type 686-A power meter. Meter measures 8.25 x 7.25 x 11 with a “Lockheed NAS 10-10900” label affixed to the top of housing. Front of t

Apollo space suit hose assembly measuring approximately 70? long, consisting of two rubber hoses feeding into one metal coupling. Each rubber hose is

Uncommon early Apollo Block I astronaut boot restraints designed for Block I application. Restraints are comprised of two metal foot pans, each with t

Collection of eight Apollo-era Beta cloth hose covers. Five of the covers measure 75.5? x 6.5?, have “Remove Cover Prior To Flight” labels sewn on to

Saturn adapter assembly affiliated with the Saturn V S-IC (first stage) program, serial no. 0000006, measuring approximately 4 x 4.5, made by Purolato

Saturn V S-IC (first stage) ball valve, measuring approximately 5 x 4 x 2.5. An attached George C. Marshall Space Flight Center metal label identifies

Saturn V S-IC ground support element assembly measuring 9? long and 2.25? in diameter. Assembly is housed in its clean room packaging, along with its

Saturn V S-IC ground support fluid coupling, serial no. 0000019, measuring approximately 5.5? long, made by Purolator. Coupling is housed in its clean

Saturn IVB third stage FM telemetry transmitter, 6? x 3? x 2?, with the affixed George C. Marshall Space Flight Center label stating, “Transmitter Tel

Saturn High Voltage Current Exploding Bridge Wire (EBW) firing unit. Unit itself measures 6.5 x 3.5 x 3 with a coiled 33? wire extending from one end.

Apollo Saturn launch umbilical switch and sensor assembly. Component measures 11? long, with an affixed Kinetics Corporation label identifying the par

Saturn ground support equipment (GSE) regulator valve designed for ground support, measuring approximately 7.5? tall, with a diameter of approximately

Saturn ground support socket assembly, measuring approximately 5.25? tall and 4.5? in diameter at its widest point. Heavy stainless steel assembly is

Saturn pneumatic solenoid valve measuring approximately 4? x 3.75.? A George C. Marshall Space Flight Center label is affixed to the upper portion of

Saturn switch selector associated with a unit for the Saturn IB/V instrument, serial no. 162, for use with a component of the Saturn IB/V. Unit measur

Saturn TM Oscillator Assembly for the first stage of a Saturn IB rocket, serial no. 003. Rectangular assembly measures 6.5 x 10 x 4.5, has four connec