RR Auction: Space & Aviation

Original canister of 16mm film from the Skylab 3 (II) mission. Canister measures 10.75? in diameter, and contains one reel of silent color film. NASA

Original canister of 16mm film from the Skylab 3 (II) mission. Canister measures 12.5? in diameter, and contains one reel of color sound film. NASA la

Original canister of 16mm film from the Skylab 3 (II) mission. Canister measures 12.5? in diameter, and contains one reel of silent color film. NASA l

Original canister of 16mm film from the Skylab 4 (III) mission. Canister measures 12.5? in diameter, and contains one reel of silent color film. NASA

Book: Living and Working in Space: A History of Skylab. Washington, DC: NASA, 1983. Softcover, 6.75 x 9.75, 449 pages. In fine condition, with light h

Collection of 16 assorted publications regarding the Skylab project, including: two identical copies of Skylab Explores the Earth, one signed on the t

Flown commercial satellite Apogee Rocket Motor Assembly from the Palapa B2 satellite retrieved from space by the shuttle Discovery during the STS-51-A

Test unit of a control panel meter for the Space Shuttle. Meter measures 1.75 x 4 x 5.25 and has two readouts calibrated from 0-115%. Metal Rockwell l

Space Station beam interconnect prototype for connecting structural trusses for possible designs. The two-piece prototype consists of two 7.5? long al

Protective Cover Crew Module-Interior Flight Deck, 20.5 x 33.5, used to protect the interior of the Shuttle from UV damage while on the ground, bearin

Engine Ground Cover for securing a Space Shuttle attitude control thruster after a mission. Measuring approximately 9 x 14, the cover consists of a br

A rare tape gauge removed from a Space Shuttle trainer when the fleet was converted to the newer ‘glass cockpit.’ Gauge measures 1.75 x 4 x 8.5 and ha

Set of two laminated color display sheets, 8.25 x 10.25, containing flown swatches from all six orbiting Space Shuttles, all identified below. Flown f

Spacehab module bulkhead attachment bolt flown on the STS-86 mission aboard Space Shuttle Atlantis, measuring 2.5? long, presented in a custom-fit pre

Collection of three flown relics: an 8.5 x 6 swatch of shuttle payload bay liner carried on board the shuttle Discovery during STS-82; a 1 x .5 swatch

A cross-cut section of flown brake disc segment, 4 x 3.25, carried into space on board the shuttle Challenger during the STS-7 mission. Segment is aff

Flown nose gear tire segment used on the Atlantis during mission STS-27 and again on Columbia during mission STS-28, approximately .75 x .75. Encased

Flown Thermal Protection System (TPS) tile segment flown aboard the shuttle Discovery’s STS-51D mission, approximately .5 x .5. Encased in a cylindric

Two flown sections of the BF Goodrich Space Shuttle Orbiter nose gear tire flown on Atlantis mission STS-27 in December 1988 and on Columbia mission S

Available to US bidders only. An unusually shaped flown insulation assembly used in the wings of the Space Shuttle to protect the aluminum structure f