RR Auction: Space & Aviation Auction

Available to US bidders only. A large flown section of shuttle wing insulation from one of the orbiters. Section measures approximately 34.5 x 6 x 11,

Triangular-shaped blue cloth headrest cover, measuring approximately 11.5 x 13.5, used on NASA’s Airstream astrovan while transporting shuttle crew me

Space shuttle illuminating panel, measuring 10 x 6, with five rectangular openings for 19 circuit breaker push-pull knobs. This panel would be located

Flexible Insulation Blanket, 23.5 x 3, made of low-density fibrous silica batting material, taken from the exterior of an unknown Orbiter. White side

Flown deployed parachute cord cutter assembly, 8.5 x 2, labeled on one side, “Space Ordnance Systems…SOS Pn 115460-202; SN 1065…7 Sec Delay Cutter.” P

SRB Booster Separation Motor (BSM) heat shield cover. This ‘toilet seat cover’ heat shield measures approximately 20? long when opened, with cover hav

Two flown sections of the nose gear tire, flown on Atlantis mission STS-27 in 1988, and on Columbia mission STS-28 in August of 1989. One segment of t

Large International Space Station metal tray, 17.5 x 5.5 x 34, with white cloth straps at both ends. White tag affixed inside is dated March 2, 2001,

Space shuttle ground support jackscrew assembly, measuring approximately 12.5 x 13.5 x 8, with identification and serial numbers stencilled to the dif

Two different control panel ‘talk back’ indicators, with black and white diagonal stripes in the viewing area, possibly from a shuttle simulator or ai

Available to US bidders only. Green angled shuttle fit check tile, 4.5 x 6 x 2, marked “V070391034-468,” with other notations on the same side, includ

Available to US bidders only. Rare Challenger-flown white LRSI (Low-temperature Reusable Surface Insulation) tile, 8 x 8.25, with NASA identification

Available to US bidders only. Black thermal protection tile, 6 x 6, with NASA identification numbers using a dot matrix part marking printed on one si

Flown medical checklist carried on board Shuttle Atlantis mission 61B in 1985. Checklist measures 5.5 x 8, is bound with its three original metal ring

Two flown flags, a 5.5 x 4 printed fabric American flag, and an identical size flag of the American Institute of Aeronautics and Astronautics, carried

Flown printed fabric Virginia state flag, 5.5 x 3.75, and a flown 4? diameter STS-27 crew patch, both carried on the STS-27 mission. Includes a 5.75 x

Flown embroidered Shuttle STS-32 mission patch, 4? in diameter, carried on board the Columbia during its January 1990 mission. Patch is affixed to a 2

Flown embroidered Shuttle STS-34 mission patch, 3.5 x 4.5, carried on board the Atlantis during its October 1989 mission. Patch is affixed to a 16 x 2

Flown embroidered Shuttle STS-57 mission patch, 4? in diameter, carried on board the Endeavour during its June-July 1993 mission. Patch is affixed to

Flown embroidered Shuttle STS-59 mission patch, 4? in diameter, carried on board the Endeavour during its April 1994 mission. Patch is affixed to a 16