1326

Outstanding Black Powder Colt Single Action Army with "Colt Frontier Six Shooter" Etched Panel Revol

Currency:USD Category:Antiques / Firearms & Armory Start Price:8,000.00 USD Estimated At:16,000.00 - 25,000.00 USD
Outstanding Black Powder Colt Single Action Army with  Colt Frontier Six Shooter  Etched Panel Revol
Buyer's Premium is 20.5% by credit card, reduced to 18% if payment is made by cash, check or wire transfer. Contact Rock Island Auction Company to complete your registration with the auction house.

Estimate: $16000 - 25000
This is an exceptional example of a Colt Single Action Army revolver that was manufactured in 1884. The revolver is chambered in caliber .44-40 and has the highly desirable acid etched "COLT FRONTIER SIX SHOOTER" panel on the left side of the barrel. The revolver has the Colt commercial blue finish on the barrel, cylinder, trigger guard and back strap. The frame, hammer and loading gate have a color casehardened finish. The one-piece walnut grip is varnished with the high polish piano finish. The revolver has the oval ejector rod head. The hammer has a knurled bordered spur and cone-shaped firing pin. The top of the barrel is roll-stamped "COLT'S PT. F.A. MFG. Co. HARTFORD CT. U.S.A." in a single line. The caliber designation "44" is stamped on the underside of the barrel just in front of the frame. The left side of the frame is roll-stamped with the Colt three date/three line patent markings. "44 CF" is stamped on the left front trigger guard bow. The assembly number, "1588" is stamped on the inside of the loading gate. An "O" Colt inspection mark is stamped on the underside of the barrel behind the ejector housing stud, "L" is stamped on the rear face of the cylinder and "H" is stamped in the hammer slot above the firing pin hole. The full serial number, "103773" is stamped on the bottom of the frame, trigger guard and back strap. The partial serial number "3773" is stamped on the underside of the barrel beneath the ejector housing and on the side of the cylinder. "3773" is written in pencil in the back strap housing of the grip. All of the visible serial numbers match.
BBL: 7 1/2 inch
Stock:
Gauge: 44-40 WCF
Finish: blue/casehardenend
Grips: walnut
Serial Number: 103773
Condition: Extremely fine overall. The revolver is outstanding and retains 80% plus of the original blue and color casehardened finish. The blue finish on the barrel, ejector housing and cylinder has faded and shows holster wear on contact points. The blue on the grip strap and back strap has thinned slightly from handling and has a dark blue-gray patina. The frame, hammer and loading gate retain about 90% of the case-hardened finish with strong case colors in protected areas. The one piece walnut grip is excellent, nearly all of the piano finish varnish remains intact. Wear is limited to some minor handling marks and two small chips on the lower right edge of the grip. All of the markings are crisp including the acid-etched "COLT FRONTIER SIX SHOOTER" panel on the barrel. The action is tight and functions perfectly. This is an outstanding example of the classic Blackpowder 44-40 Colt Single Action Army revolver