305

Oskar Schindler

Currency:USD Category:Collectibles / Autographs Start Price:NA Estimated At:40,000.00 - 60,000.00 USD
Oskar Schindler

Bidding Over

The auction is over for this lot.
The auctioneer wasn't accepting online bids for this lot.

Contact the auctioneer for information on the auction results.

Search for other lots to bid on...
Auction Date:2013 Aug 14 @ 18:00 (UTC-05:00 : EST/CDT)
Location:5 Rt 101A Suite 5, Amherst, New Hampshire, 03031, United States
ALS - Autograph Letter Signed
ANS - Autograph Note Signed
AQS - Autograph Quotation Signed
AMQS - Autograph Musical Quotation Signed
DS - Document Signed
FDC - First Day Cover
Inscribed - “Personalized”
ISP - Inscribed Signed Photograph
LS - Letter Signed
SP - Signed Photograph
TLS - Typed Letter Signed
Extraordinary collection of construction plans in German for Schindler's Krakau munitions factory, consisting of two bound folders full of planning material and a set of 12 large sheets of period carbon or printed engineering plans displayed in nine frames. One red folder is labeled on the front by contractor Siemens-Bauunion G.m.b.H., 9 x 12, February 2, 1943, 37 pages, and contains extremely detailed calculations regarding the construction of the building (primarily material weights and structural loads), as well as a few architectural drawings. The other folder also contains calculations regarding area and costs, 8.75 x 12, 25 pages, October 1943, and features numerous ink notations in an unknown hand throughout. All engineering plans are labeled either "Halle Krakau [Krakau Hall]" or "Flugzeughalle [Hangar]," and are dated throughout November 1943. First sheet of plans shows an overview drawing of the hall, 45 x 18, and is framed to an overall size of 50.5 x 24. Second shows cross-sections of various points of a supporting wall and the roof, 40.5 x 20.75, and is framed to an overall size of 46.25 x 26.5. Third shows the gradient slope of the roof with detailed measurements of its support beams, 44 x 23.5, and is framed to an overall size of 49.25 x 29.5. Fourth is the largest, and shows very detailed plans for a part of the roof and its key support points, also referencing wood extract, wood cut list, and iron output, 54 x 25, and is framed to an overall size of 59.5 x 31. Fifth and sixth sheets show cross-sections of the roof and a large table of figures regarding its load bearing capacities, each 28 x 11.75, and are framed together to an overall size of 32 x 30. Seventh further details the slope of the roof and its supports, 30 x 18, and is framed to an overall size of 35.5 x 23.75. Eighth and ninth diagrams contain more construction angles and load-bearing tables, each 19 x 11.5, and are framed together to an overall size of 29.5 x 25. Tenth and eleventh sheets are similar in their references to weight-bearing structures, each 16.75 x 11.5, and framed together to an overall size of 29.5 x 25. Final sheet shows a detailed cross-section of the roof with axis points and a table of calculations, 23 x 11.5, and is framed to an overall size of 29 x 17. In overall fine condition, with intersecting folds, and toning and filing holes to left edges.

In the spring of 1943, Oskar Schindler began, under SS supervision, the construction of a Judenlager, or labor sub-camp, on the grounds of his Emalia factory in Kraków, Poland. This was the first phase of what became, over the next two years, his efforts to save his 1,000 Jewish workers in his factory.

Once construction on the Judenlager began, Schindler also began plans to build a stamping plant just beyond the confines of the Judenlager. It would be the largest building in the Emalia complex and would play an integral role in Schindler’s efforts to protect his Jewish workers from the excesses of the SS and out of the deadly hands of the commandant of the Plaszów concentration camp, Amon Goth. The Schindler Judenlager was a subcamp of Plaszów.

The plans for the stamping plant were prepared by Siemens-Bauunion G.m.b.H and consist of two parts, the architectural drawings and the statistical estimate for the costs of building the plant for Schindler. These are the original documents used in the construction of the Emalia stamping plant. The architectural design was that of a Flugzeughalle (aircraft hangar) type 240-241, a standard design by Siemens for factory construction. This large building, which still stands on the grounds of the Emalia complex today, would enable Schindler greatly to expand his production of enamelware and provide jobs for his growing population of Jewish inmates. Both sets of documents date from February 1943 until the fall of 1943, when construction on the stamping plant began. The financial estimate collection includes the notation that it had been registered with the city archives in Kraków and also includes the signature of an official in the city engineering office.