June 2010 Regional Firearms Auction

A) Blade and adjustable notch sights, with blue small parts, standard markings, checkered backstrap, checkered medallion grips and a spare magazine.

A) Manufactured in 1968 with standard markings and features. BBL: 6 inch solid rib Stock: Gauge: 357 magnum Finish: nickel Grips: checkered

A) Artificially aged, wedge screw and barrel connecting pins absent, undersized grip, hammer does not hold at full cock position. BBL: 8 inch round

A) Produced in 1899, standard markings and features with "JMC" hand marked on the butt, matching assembly number (662) on cylinder latch, ...

A) Introduced in 1982. Standard markings and features. Minor finish loss near at the muzzle. BBL: 6 inch round Stock: Gauge: 22 LR Finish: b

A) Standard commemorative markings and features. Complete with original box numbered to gun. BBL: 18 inch round Stock: walnut Gauge: 30-30 Fin

Blade is 9 inch long, with the leading and false edges done in a Damascus pattern with streaks of gold running through, and the entire ricasso and fla

Blade marked "Randall" on the left with 12 serrations on top. 3 1/4" blade. Red, white and blue stripes between hilt and horn grip. C...

1) Scottish kilt knife, 2 1/2" single edge blade, dual quillions, carved ebony handle and etched sheath with chain hanger. Blade fair with chip...

1) Scottish Dirk with twist pattern on metal grip, 6 1/2" blade marked "DUFOUR", with leather sheath featuring a twist pattern on the...

1) Dagger, 10 3/8" triple fuller blade, with silver finished wire accented brass hilt and matching sheath. 2) Wusthof (Solingen) dagger, 4 3/4&...

Collection of U.S. Army Air Forces paper items such as memos, training related aids, two Scott Field publications, mission journal that consignor stat

Approximately 23 Remington brand knives, mostly Bullet Knives, Silver Bullets and Wildlife Editions, along with some commemorative knives, all in boxe

A) One half size replica of a Browning M2HB (12.7mm) 50 cal. (non-firing) with tripod and cartridge links. Most of the finish remains with the left ha

1) Sixteen letter openers styled to look like U.S. cavalry sabers. Each has an approximately 7 1/4 inch blade, three branch hilt and metal scabbard. 2

1) French sword, 38" double fuller blade, Klingenthal marked and 1823 dated, with three branch brass guard, leather covered grip and iron sheat...

1) English officers sword by R. Nodder of Liverpool, single fuller blade, makers mark on the left ricasso with a six-pointed star on the reverse. Wire

1-7) Miniature swords with sheaths, including a U.S. 1902 and several European designs. 8) Large brass hilted bowie knife, 9 7/8" blade marked ...

Samurai style kabuto, knight on horseback metal statue (13" tall), 5 assorted daggers each with sheath (poor to good), 4 U.S. machetes each wit...

Approximately 96 books mostly hardcover. Gun specific titles like "Lugers at Random" by Handgun Press, "The P.38 Pistol Volume I"...

A) Standard markings and features with fancy grain fiddle back maple stock and forearm and lightly engraved receiver. In a green felt lined take-down

A) Manufactured in Japan, standard markings and features. 2 3/4" chamber with ejector, choked full, 14 1/2" length of pull. BBL: 34 inch...

A) Standard markings and features, Win Choke system, 3" chamber, 14" length of pull. Complete with papers, wrench and three total choke tu...

A) Manufactured in Italy, floral scroll engraved action. 3" chambers with extractor, choked full/full. 14" length of pull. BBL: 28 inch ...

A) Standard markings and features with a floral scroll engraved action. Does not function. 3" chambers, chokes gauge full/modified. 14" le...

A) Manufactured in Italy. 2 3/4" chambers with extractor, chokes gauge full/improved modified, Decelerator recoil pad 13 3/4" length of pu...

A) Standard markings and features. 2 3/4" chamber, extractor, choke gauges cylinder. 14" length of pull. Barrel cleaned. BBL: 30 inch ro...

Manufactured in Japan, with standard markings and features. Single bead sight on a vent rib, 2 3/4 inch chamber, choked full. Length of pull 14 1/4 in

Manufactured in Belgium from 1936 to 1976. Standard markings and features, choked full, 2 3/4 inch chamber with a 14" length of pull. Bottom of...

A) Standard markings and features, marked full choke, 3" chamber and a 14 inch length of pull. Shows minor spotting. BBL: 25 inch vent rib ...

A) Introduced in 1963. Choked improved cylinder, 2 3/4" chamber and a 14 inch length of pull. Complete with a 27" extra barrel with a vent...

A) Manufactured in Turkey. Removable choke, 2 3/4 or 3" chamber, 14" length of pull. Complete with box numbered to the gun and papers. B...

A) Damascus steel barrels with both sides of receiver marked "New Worcester/Hammerless". 2 3/4" chambers, modified/?? Chokes with len...

A) Standard markings and features with 2 3/4" chamber, C-Lect choke on muzzle and length of pull 14". BBL: 26 inch vent rib Stock: che...

A) Standard markings and features with a removable, modified choke tube, 2 3/4" chamber and a 15" length of pull. BBL: 28 inch vent rib ...

A) KBI and CZ markings. Double set triggers, tapered barrel manufactured without sights, receiver drilled and tapped. Includes a box of Remington .35

A) Introduced in 1899. Standard markings and features. Stock is refinished and shows a repair on the wrist. BBL: 20 inch round Stock: walnut Gau

A) Standard markings, ramp blade front and adjustable leaf rear sights. BBL: 26 inch round Stock: walnut Gauge: 30-30 Finish: blue Grips:

A) Produced from 1903-04, standard markings, blade front sight has three white dots, bobbed hammer, replacement undersized plastic eagle grips. Some

A) Introduced in 1907. Single bead sight, improved modified choke, "NB396269497" added to the receiver, ribbed forearm, smooth stock, repl...

A) Produced for the Shapleigh Hardware Company. Sight bead removed, standard receiver markings, smooth stock and checkered buttplate. Improved modifie

A) Standard markings and features with length of pull 14 inches, 2 3/4 inch chambers and choked improved modified/improved cylinder. BBL: 28 inch ve

A) Single orange bead, with modified marked choke, 2 3/4" chamber, roll engraved frame, grooved forearm, checkered grip and serrated buttplate....

A) Standard markings and features. Length of pull is 14 inches and the gauge barrel has a 3 inch chamber and choked full. Forearm and stock have been

A) Introduced in 2000. Rifle sights, improved cylinder choke, 3" chamber, standard markings, checkered stock, vented recoil pad, nylon sling an...

A) Manufactured in Belgium between 1952 and 1976. Standard markings and features with length of pull 14 inches, 2 3/4 inch chamber and choked modified

Single bead sight, full chokes, extractor, 3 1/2" chambers, engraved frame, automatic safety, replacement stock, 13 3/8" pull. Needs adjus...

Manufactured circa 1984. Features a ported barrel (porting is damaged), with a removable, full choke tube, 2 3/4" chamber, ejector and a 14&quo...

A) Standard markings and features with length of pull 14 inches, chambered for 2 3/4 inch shells and choked improved modified. BBL: 28 inch round

A) Produced from 1907-29, standard markings and features, choked full, pull is 14 1/2", vented Jostam recoil pad, stock comb has been dished ou...

A) Standard markings and features with length of pull 13 inches, chambered for 2 3/4 and 3 inch magnum and choked improved modified. BBL: 20 inch ve

A) Standard markings, adjustable choke, vented factory recoil pad, safety does not function, pull is 13 3/4". BBL: 28 inch round Stock: wa...

Lot includes a miniature brass hand cannon, leather cartridge holder, woven leather whip, 2 leather holsters, 2 gun belts, green nylon web belt, 3 pow

A) Manufactured in West Germany with left receiver marked "Savage" and "Anschutz". Standard features. Complete with a Torel cowh...

A) Introduced in 1989 with standard markings and features. Complete with two scope rings and original box numbered to gun. BBL: 20 inch round Stoc

A) Standard markings and features (absent magazine) with receiver drilled for scope mounts and factory box BBL: 21 inch round Stock: synthetic G

A) Ramp blade front and adjustable peep rear sight, leather sling, custom replacement checkered high comb stock with cheekpiece and Fajen buttplate.

A) Ported and snake fluted Volquartsen 17 Mach 2 custom barrel, enlarged bolt handle, altered magazine release, scope base on receiver and custom stoc

A) Standard markings, front and rear sights removed (filler block added), Weaver type scope blocks added to receiver, cracked stock, magazine tube abs

A) Manufactured between 1955 and 1972 with standard markings and features. BBL: 22 inch round Stock: checkered walnut Gauge: 308 Win Finish: b

A) Produced in 1957, blade front and wheel adjustable rear sight on barrel with some scattered minor pitting, Browning 4x scope, scroll engraved recei

A) Made in Japan, single brass bead, casehardened action with tang mounted break lever. Choked improved modified, 3" chamber with ejector. BB...

A) Introduced in 1964 with standard markings. Complete with a Tasco Golden Antler 4x32 scope and Ruger marked canvas sling. BBL: 18 1/2 inch round

A) Imported by CAI with two Tapco detachable magazines, bayonet with sheath, green magazine pouch, box of 15-7.62mm ammo, leather belt, leather knife

A) Manufactured between 1919 and 1937 with hooded front and raised rear peep sights. Complete with target scope blocks, detachable magazine and milita

A) Manufactured in 1916 with standard markings and Mershon "WHITE LINE" vented recoil pad. 2 3/4" chamber, full choke with length of ...

A) Standard markings, 2 3/4" chamber, choked full, vent recoil pad, pull 13 3/4". "JDJ" inscribed on trigger guard and on stock ...

A) Standard markings and features with "Crown/U" and "Crown/B" proofs on barrel, receiver and bolt. Mauser logo on right buttsto...

A) Left side of receiver dated "1956" with serial number and fixed rear sight. Complete with original box numbered to gun. BBL: 27 inch ...

Manufactured between 1955 and 1964 with "US" marked receiver and Redfield Olympic sights. Scope blocks on barrel and receiver with adjusta...

A) Introduced in 1956. Standard markings and features. BBL: 19 1/4 inch round Stock: walnut Gauge: 22 LR Finish: blue Grips: Serial Numb

A) Standard markings and features, Tasco 4x32 scope. BBL: 20 inch round Stock: laminated Gauge: 22 LR Finish: stainless steel Grips: Seri

A) Produced from 1949-58, standard markings, field scene etched action, 2 3/4" chamber, choked full, vented Pachmayr recoil pad, pull is 14 1/4...

A) Manufactured from 1936 until 1950. Standard markings and features. Left side of the receiver drilled and tapped. BBL: 22 inch round Stock: waln

A) Introduced in the 1980s. Standard markings and features with a Weaver ChallengerUSA scope. BBL: 22 inch round Stock: checkered walnut Gauge:

A) Standard markings, Mossberg No. M4a 4x scope (some minor rust, vertical adjustment knob absent). BBL: 24 inch round Stock: hardwood Gauge: 22

Equipped with bird cage flashider, bayonet lug, brass deflector, forward assist, and adjustable sights. Short handguard and 3 position telescoping sto

A) Standard markings and features. Shows minor spotting on the receiver. Plug repair in the stock. BBL: 20 inch round Stock: walnut Gauge: 30-30

A) Manufactured in England, standard markings and features with a K-Mart All Pro scope and a leather sling. BBL: 24 1/2 inch round Stock: walnut

A) Standard markings and features with a wood handguard, military style adjustable rear sight, 30 round magazine and mounted with a Tasco scope. BBL

Standard markings and features with a detached Lyman scope and mount. BBL: 24 inch round Stock: walnut Gauge: 22 S L LR Finish: blue Grips:

A) Produced for Sears, Roebuck and Co., standard markings, receiver mounted adjustable peep sight and a brown leather sling. BBL: 24 inch round St

One Ontario Knife Co. marked machete with 18 inch blade, hard rubber grips and green canvas sheath with "(peace sign) IN R.V.N." written o...

A) Imported began in 1988 with matching numbers on receiver, bolt, trigger guard and stamped on left side of buttstock. Standard features with 30 roun

A) Manufactured between 1864 and 1865 with "1864" date behind hammer and "US" stamped buttplate. Standard features and ramrod ha...

A) Standard markings and features. 3" chamber, marked FULL CHOKE", 14" length of pull. BBL: 26 inch round Stock: walnut Gauge: ...

A) Standard markings and features with padlock, manual, papers and original box numbered to gun. BBL: 22 inch round Stock: synthetic Gauge: 7 mm

Bone on ivory construction, with extensive cut-through decoration, 11 1/2" long. Some parts detached, with broken sections. BBL: Stock: ...

42" in length, painted wood with cloth sails, string rigging and miniature brass colored cannons. With display stand and extra parts. Good, wit...

1) Early American ship, 22" long, wood with cloth sails and thread rigging. Good, with some loose parts. 2) French ship, 33", as 1, marked...

Painted wood construction with painted metal and brass accents and string lines, 39" long and 12" tall, with stand and U.S. Coast Guard re...

Both models are 36" long, painted resin with brass on the deck, on a wood base. One has the deck and rigging painted flat gray, the other with ...

1) Steam vessel "Winfredo", 19 1/2" long, with metal accents and string rigging. 2) Steam tug, 39" long, wood construction, wire...

26" in length, painted wood with thread rigging. In very good condition. BBL: Stock: Gauge: Finish: Grips: Serial Number:

1) SS Edmund Fitzgerald, 12 1/4" long, painted resin with brass accents, on a wood base. Good, with some bent/ absent brass, separated from bas...

1) HMS Victory, a 98-gun frigate, 30" long, wood with cloth sails and string rigging. With marble base, in very good condition. 2) HMS Surprise...

20 inches in length, made from bone panels with string rigging. Mounted on a wood base. Very good. BBL: Stock: Gauge: Finish: Grips:

Three masted wooden sailing ship model measures approximately 32" long, 27" tall with a hardwood and glass display case. Consignor states ...

1) RMS Queen Elizabeth II Scale Model, 39" in length, wood with metal accents. Very good, with some damage to the aft cranes and dents in the r...

40" in length, 28-gun vessel, wood construction, canvas sails with ribbing, string lines and miniature cannons. Fine, with cracks in the decks,...