June 2010 Regional Firearms Auction

Restamped barrel address, buttstock sling swivel replaced with an eye hook, magazine tube missing parts, ladder rear sight, front sight base collar is

Third Model produced in 1889, non-factory replacement duct cover and forend cap screws, large dent on magazine tube, standard markings. BBL: 24 inch

Second Model produced in 1869, Henry patent barrel marking, forend tip missing sling swivel and screw replaced with a pin, action needs work. BBL: 2

Produced in 1919, Lyman front sight, rear sight removed (Marbles filler block added), Lyman receiver peep sight, receiver cleaned with minor pitting,

Third Model produced 1874, "H. NOBLE" period stamped several times on frame and buttstock. Stamping is of a high quality and is authentic....

A) Third Model produced in 1890, standard markings and features, cleaned metal. With leather scabbard (very good). BBL: 20 inch round Stock: walnu

Second Model produced in 1881, standard markings, shortened barrel and magazine, rear sight partially removed, casehardened receiver, repaired lower t

Third Model with serial number barely visible, partially visible barrel address, standard features. BBL: 24 inch octagon Stock: walnut Gauge: 44

Manufactured in 1897, rechambered for the 45-70 cartridge, rear sight removed and receiver peep sight installed. Blue with nickel plated forend cap an

Third Model produced in 1886, standard markings, shortened barrel and magazine tube. BBL: 21 inch octagon Stock: walnut Gauge: 44 WCF Finish:

Second Model produced in 1881, shortened barrel and magazine, added front sight and sling swivels, ladder rear sight, crudely repaired buttstock. BB

A) Produced in 1915, standard markings and features, saddle ring stud removed. BBL: 22 inch round Stock: walnut Gauge: 30 U.S. Finish: blue

Third Model produced in 1883, standard marking, Marbles blade front sight, elevator absent from rear sight, tang peep sight, ebony insert on bottom of

Made in 1895. Blade and semi-buckhorn sights, scroll engraved barrel and frame with deer scenes on the frame and checkered fancy high grade walnut sto

Produced in 1882, serial number falls into the Second Model serial number range (3000-30000), but is a Third Model (dust cover rail machined as part o

Made in 1881. Blade and ladder sights, with 2 line address, one line caliber marking, shortened barrel and smooth stock. With a 20 round box of vintag

A) Second Model produced 1881, standard markings and features, with tang peep sight, left side of receiver drilled and tapped for a sight mount, metal

A) Produced in 1916, standard markings, no caliber marking (barrel gauges at .30), metal cleaned, blade front and aftermarket rear sights, filler bloc

A) Produced in 1902, standard markings and features. BBL: 24 inch octagon Stock: walnut Gauge: 44 WCF Finish: blue Grips: Serial Number:

A) Produced in 1889, standard markings, replacement buttstock with contrasting wood and nickel plated buttplate, some minor pitting under the finish.

Nicely figured reproduction varnished walnut buttstock for a Henry rifle, with sling swivel stud base cut out on the left side and without a buttplate

1) 2- 12" x 10 1/2" full size Model 92 and 94 extra light forearm tip for an octagon barrel dated Jan. 2, 1900 and lever marked "fing...

Framed: illustrated stagecoach robbery scene by unknown artist, Winchester/Western "Shoot Them and Avoid Trouble", Red Indian cut plug 2 o...

Third Model produced in 1875, Winchester barrel marking, standard features, minor ding in magazine tube. BBL: 20 inch round Stock: walnut Gauge:

Standard markings and features with Damascus steel barrel. Large chip on buttstock toe. BBL: 30 inch solid rib Stock: walnut Gauge: 12 Finish:

Third Model manufactured in 1885 with standard markings and features. BBL: 26 inch octagon Stock: walnut Gauge: 38 Finish: blue Grips: Se

Manufactured in 1925 with standard markings and features. BBL: 26 inch octagon Stock: walnut Gauge: 25-35 WCF Finish: blue Grips: Serial

Produced in 1895, shortened barrel and magazine, replacement sights, no visible barrel address (crudely remarked caliber, upper tang model marking, an

A) Manufactured in 1892 with standard markings and features. BBL: 24 inch octagon Stock: walnut Gauge: 32 WCF Finish: blue Grips: Serial

A) Manufactured in 1921 with standard markings and features. Stock has been revarnished. BBL: 24 inch round Stock: walnut Gauge: 25-20 WCF Fin

Fourth Model produced in 1882, standard markings and features, sanded wood, lever is a little loose. Desirable octagon barrel. BBL: 24 inch octagon

Manufactured in 1885 with standard markings and Marble's buckhorn rear sight. Replacement stock. BBL: 24 1/2 inch round Stock: walnut Gaug...

A) Manufactured in 1916 with standard markings and features. BBL: 20 inch round Stock: walnut Gauge: 30 WCF Finish: blue Grips: Serial Nu

A) Manufactured in Spain with standard markings and features. Saddle ring and staple on left side of frame. BBL: 22 inch round Stock: walnut Gau

A) Produced in 1891, standard markings, tang peep sight. Forearm has large absent chip and a repaired chip. BBL: 26 inch octagon Stock: walnut G

Made in 1925. Blade and adjustable folding leaf sights, Lyman tang mounted peep sight. Standard markings, half magazine and smooth straight grip stock

Manufactured from 1922 to 1938, with standard markings and features. Dovetail blade front and tang mounted short range peep sight on the upper tang. T

Produced in 1931, standard markings and features with smokeless Model 94 rear sight. BBL: 20 inch round Stock: walnut Gauge: 32 W.S. Finish: b

Manufactured in 1888 with faint markings. BBL: 20 inch round Stock: walnut Gauge: 44-40 Finish: blue/casehardened Grips: Serial Number: 3

Produced in 1949, standard markings and features. BBL: 20 inch round Stock: walnut Gauge: 25-35 WCF Finish: blue Grips: Serial Number: 15

Produced in 1949, standard markings and features. BBL: 20 inch round Stock: walnut Gauge: 30 WCF Finish: blue Grips: Serial Number: 15332

A) Manufactured on 1904. Standard markings (barrel patent dates double stamped) and features, "MODEL / '94" on tang. Receiver and tan...

A) Produced in 1899, standard markings and features, with special order smooth metal shotgun buttplate. BBL: 20 inch round Stock: walnut Gauge:

A) Manufactured in 1949 with standard markings, Marble Sheard front and rear sight, and Williams elevated rear peep sight on receiver ahead of hammer.

A) Produced in 1896 with barrel subsequently shortened, standard markings, blade front and buckhorn rear sights. BBL: 20 inch octagon Stock: walnu

A) Produced in the early 1940s, standard markings and features, action slightly tight. BBL: 20 inch round Stock: walnut Gauge: 25-35 WCF Finis

A) Manufactured in 1922, standard markings and features with "PS / ORURO" stamped on left side of receiver and revarnished wood. BBL: 20...

Blade and hammer notch sights, with the Paris address on the barrel, "V" and "GP" London proofs on the barrel, cylinder and shot...

Manufactured in 1849, standard markings and features with a refinished barrel and cylinder. In hardwood case with green velvet interior, cleaning rod,

A) Produced in 1855 with Colt London barrel address, matching visible numbers (backstrap no longer visible). Loading lever latch and front sight are a

Manufactured in 1862 and shipped to General N.B. Baker, U.S. Quartermaster in Davenport, Iowa October 31, 1862 in a shipment of 1,200 guns. Serial num

A) Manufactured in 1863, with a 3 screw frame cut for a shoulder stock. Visible number match. BBL: 8 inch round Stock: Gauge: 44 percussion F

A) Produced in 1861, standard markings and features, matching numbers, refinished grips without cartouches, metal cleaned bright, 4 screw frame cut fo

A) LeFaucheux marking on barrel, Liege ELG and crown proofs on cylinder. BBL: 6 3/8 inch part-octagon Stock: Gauge: 11 mm Finish: blue Grip

1) 8 1/4 X 13 1/4 x 3 inch hardwood case with a blue velvet lining, lid is inlayed with brass and has brass fittings, Has an initial plate marked &q...

Made in 1869. Altered blade sight, one line address, restamped numbers, brass trigger guard, steel backstrap and smooth one piece ivory grips. Grip cr

A) Manufactured in 1863. The revolver has a three-screw frame. Single letter Ordnance sub-inspection marks are stamped on most major components. Consi

A) Produced in 1876. Two line address and etched panel on barrel, niter blue small parts and smooth bird's head grips. BBL: 2 1/4 inch irregul...

Produced in 1856 with early barrel address, "COLTS / PATENT / U.S." on frame, refinished/repaired grips, metal cleaned bright, matching se...

Produced in 1851, mismatched wedge and loading lever, remaining numbers match, replacement hammer. With wooden case featuring relined velvet, a doub

Standard conversion with shortened barrel, standard markings, metal cleaned, visible numbers match, "0472" marked on loading gate. BBL: ...

Manufactured in 1863. Standard markings and features. All numbers match including partial serial numbers on the arbor pin, wedge and loading lever. So

A) Manufactured in 1867. Mixed numbers, standard features and smooth grips. BBL: 7 1/2 inch octagon Stock: Gauge: 36 percussion Finish: blue

A) Produced in 1862, standard markings and features, refinished grips, matching numbers. BBL: 4 inch octagon Stock: Gauge: 31 percussion Fini

Produced in 1861, standard markings and features, some minor pitting. With black painted wood case with red felt lining holding a flask, two bullet mo

Red velvet lined, three partitioned walnut box with iron, two cavity bullet mold, small unmarked powder flask, lead balls and bullets. Good with a few

9-1/2 inches in length with both sides stamped with the stand of flags, cannon, crossed rifles and pistols and unmarked banner at the bottom. Triangul

Made in 1855. Commercial markings, oval brass trigger guard and rectangular cylinder stops. Cylinder restamped, no scene visible, otherwise numbers ma

Standard markings and features, matching serial number on frame, barrel, trigger guard, backstrap, cylinder, and loading lever, with wedge unmarked. B

Made in 1861 and engraved later. Standard markings, naval cylinder scene, matching numbers and factory style scrollwork. Varnished one piece grip. B

A) Fixed sights, standard barrel markings, brass trigger guard and smooth grips with inspector cartouche. BBL: 8 inch octagon Stock: Gauge: 44

Fixed sights, New Jersey address, stagecoach cylinder scene, folding trigger and smooth grips. BBL: 7 1/2 inch octagon Stock: Gauge: 36 percuss

Manufactured 1873 to 1878. Standard markings and features with the "REISSUE" patent date marking. BBL: 7 inch solid rib Stock: Gaug...

Made 1863-1865. Fixed sights, standard markings, small letter proofs, matching numbers and smooth grip with no cartouches. Some pitting under the fin

1862 revolver patent model, comprised mostly of mahogany with small brass components. The trigger is missing but none of the patent features are conne

Produced in 1911 as a semi-Centennial commemorative by The Review of Reviews Company. 10 volumes, all included, all in very good or better condition.

A) Introduced 1970. Standard markings and features. In Colt wood grain box. BBL: 6 inch round Stock: Gauge: 22 Finish: Blue Grips: black ea

An assortment of 12 military badges with each attached to a wooden base for wall hanging, 7 frames holding various military badges. BBL: Stock:

Standard markings and features, refinished stock and forearm (cracked) with plastic buttplate, blade front, broken rear, and tang peep sights, matchin

Leather wrapped forend and wrist. Barrel marked "LANCASTER, PA. WARRANTED". The name "H.E. LEMAN" appears on the lock and barrel...

Shortened. Blade front sight, Lancaster, PA address on barrel, "HELEMAN" on barrel and lock, smooth stock and flat brass buttplate. BBL:...

Standard markings with "1873" stamped on receiver, "1865" stamped on lower tang, rear sight removed, combination beech front sig...

Standard markings and features, removed buttstock sling swivel stud, head of screw on bottom of receiver is missing. BBL: 20 inch round Stock: wal

Standard features, lock marked "U.S. / SPRINGFIELD / 1873". "MODEL 1873" marking on breechblock, repaired stock wrist. BBL: 22...

Standard markings and features, 2 clear stock cartouches, "BOVIA" scratched into buttstock. BBL: 22 inch round Stock: walnut Gauge: ...

Standard receiver markings, replacement military style stock, leather sling, blade front and ladder rear sights BBL: 30 inch round Stock: walnut

Made 1870 - 1873. Blade and ladder sights, with matching numbers on barrel and chamber, high arch breechblock, 2-click tumbler, "1863" dat...

Standard markings and features with replacement stock and forearm. Three clear stock cartouches. BBL: 22 inch round Stock: walnut Gauge: 50-70 U

A) Shortened barrel and stock, ramp front sight (loose), Redfield adjustable rear sight on a Marble's base. BBL: 24 1/2 inch round Stock: wa...

A) Receiver and breechblock marked "WERNDI", metal cleaned, "863" on lock, "23" on some of the components. Hammer does...

Standard markings and features, with "1864" dated lock plate. The wrist has subsequently been checkered and stock refinished, monogrammed ...

Manufactured between 1861 and 1865 with Birmingham proofs and "25" marked on left rear barrel. Lock plate marked with British crown behind...

Produced in 1863, and later outfitted as a breech loading rimfire cartridge rifle. The bolster and top section of the breech were removed, with a hing

A) Lock and upper tang dated 1863, rear sight absent, silver shield behind upper tang marked "29". Stock has custom checkering near the bu...

A) Lowered front sight, faint markings on the engraved lock, drum-style conversion, brass forearm tip, replacement iron button head ramrod, straight g

Lock plate dated 1863 with standard markings, barrel dated 1862 with "VP" and "N.J. STEEL" on left side. "N.J." stamp...

Standard conversion features, 1862 dated lock, "10" stamped on left stock flat and near upper tang, museum type number on lower tang and &...

A) Introduced in 1869 with top of receiver marked "III". Lock plate marked "Crown/1871/Enfield" in front of hammer and "Cro...

A) Manufactured between 1861 and 1862 with "1861" dated lock plate and "1862" dated breech with "V/P/eagle head" proof...

1) 1938 dated commemorative Gettysburg pennant, 17 1/2 inches long, blue felt with yellow highlights, with an image of the Eternal Light in the lower