June 2010 Regional Firearms Auction

A) Lock marked "RUSS HAMM / WARRANTED", protective coating applied to metal surfaces, brass stock over lay and furniture. BBL: 43 3/4 in...

A) "J. TURK" (a Warren County Ohio gunsmith) marked barrel, tang drilled for a sight mount, cleaned metal with remnants of a protective co...

A) No maker markings, double set trigger missing parts and action needs work. Silver mountings. Stock varnished. BBL: 43 1/2 inch octagon Stock: w

A) Barrel marked "J. CASWELL" and "REMINGTON", rear sight missing elevator, piece of buttplate extension near toe is absent, ham...

A) Dog scene engraved lock marked "JAS. GOLCHER", double set triggers. BBL: 43 5/8 inch octagon Stock: maple Gauge: 38 Percussion ...

A) "WARRANTED" and "1803" marked lock, illegible marking on barrel, double set triggers (don't function), hammer does not h...

A) Barrel marked "DEERE / SPRINGFIELD", hammer screw absent, action does not function properly, remnants of protective coating on metal. ...

A) Adjustable rear sight, "US" marked lock, brass barrel bands, bayonet lug, smooth stock and patchbox. With a black leather sling BBL: ...

Floral engraved frame, lock, hammer, trigger guard and cartridge compartment, blade front, notch rear and tang peep sights, double set triggers, some

No maker markings, hinged rod connects the hammer to striker (located 6 1/2" from muzzle), barrel drilled for a sight mount, fixed sights and d...

A) Originally a flintlock that has been converted to percussion using a drum style percussion conversion. Cut down replacement barrel with rear sight

A) No visible maker markings, repaired/refinished stock, added wood around lock, added screws in buttplate to hold together crack section in buttstock

A) Top barrel crudely marked "J.Henry" with floral engraved lockplate, brass furniture and patch box, silver initial shield and star, tige...

A) Dovetail blade sight, with "P. Bettis" signature on barrel and "GOLCHER" mark on lock, which is engraved. Tiger stripe stock,...

A) Manufactured between 1897 and 1905 with standard markings and crest on receiver. Standard features. BBL: 31 1/2 inch round Stock: walnut Gaug

A) Standard markings and features with an artificially aged gray patina. Complete with wood case, bullet mold, capper, powder flask, tool, cleaning ro

Hammer and ramrod are missing. Initials carved into the stock with "A.C. N.O" on the trigger guard tang. Large chip on left side of the st...

Blade and groove sights, with "JCS" inspector mark on the barrel, 1837 dated lock, drum style conversion, faint stock cartouches and a swi...

A) Fixed sights, Liege proofs, makers marks on tang, mixed numbers, finger rest triggerguard and checkered grip. From the C.W. Slagle Collection. BB

A) Made circa 1872-1888. Fixed sights, with address and "P", "S" proofs on the left side of the frame. Hammer and block spur ar...

A) Right barrel flat marked "ARENDT 9021 REGL", crown/V proofs, chiseled floral motif trigger guard, floral carved stock with repaired fl...

A) Features a decorative wire pattern gold inlaid barrel, hammer is operated by an external spring. Hammer does not always hold a cock position. BBL

A) No maker markings, brass barrel/iron frame, one piece grip ill-fitting at frame, metal surfaces cleaned bright at one time, some minor pitting, mod

A) Unidentified proof on barrel and lock, hammer locked in the cock position. Large cut-down nail serves as a ramrod. Metal pitted and heavily polishe

Brass blade sight with swivel ramrod, "1851" on tang and lock, standard markings, 2 faint stock cartouches and brass furniture. BBL: 8 1...

A) Made 1867-1888. Replacement barrel and smooth two piece grips. Frame cleaned. BBL: 2 1/2 inch part octagon Stock: Gauge: 41 RF Finish: nic

A) Standard markings and features with "1838" date on lockplate and "JH" initials on the left side of the barrel. The ramrod ass...

A) No maker markings, replacement ramrod. Hammer has to be manually de-cocked. BBL: 4 3/8 inch octagon Stock: walnut Gauge: 52 Finish: bright

A) Features scroll engraving and a dog head hammer. Action needs work. BBL: 5 1/4 inch round Stock: Gauge: 58 percussion Finish: blue Grips

A) Standard markings and features, with matching numbers, except grips. BBL: 3 1/2 inch round Stock: Gauge: 31 Finish: blue Grips: walnut

A) Damascus barrel with Liege ELG proof, engraved action, set trigger and checkered grip. BBL: 9 1/4 inch octagon Stock: walnut Gauge: 48 Fini

A) Measures 26" long, with the barrel doubling as the grip, the action partially contained in the hollow "blade". Mechanically not te...

A) Scepter proofs on barrel, fixed sights, bag shaped grips. BBL: 8 inch octagon Stock: Gauge: 22 Finish: blue Grips: walnut Serial Numbe

A) Chiseled action and side plate, brass furniture, grip crudely repaired with wire. Chips missing on stock. BBL: 10 3/4 inch round Stock: walnut

A) Introduced in 1893. Standard features. Transfer bar absent. BBL: 3 inch raised rib Stock: Gauge: 32 S&W Finish: nickel Grips: hard...

A) "MARRISON NORWICH" marked solid barrel rib, with scroll engraved fish sculpted hammers (left hammer spur absent), swivel ramrod, Britis...

A) Standard Worcester markings and features, metal cleaned. Matching numbers on frame, hammer spring, both grips and barrel cluster. BBL: 3 1/8 inch

A) Damascus barrels numbered 1-4, scroll engraved frame, Liege ELG proof present. Action needs work. BBL: 2 5/8 inch cluster Stock: Gauge: 38

A) "Crown/V" proofs, removable (unthreaded) nipple with threaded safety device that blocks the hammer when turned, floral scroll engraved ...

"ALLEN PATENT" on the hammer, Worchester address on a barrel rib with 1837 patent date on another rib. Floral engraved frame and nipple sh...

A) Fixed sights, 6 round cylinder, centerfire striker added to hammer and smooth bag shaped grips. Functions in double action only. BBL: 5 1/4 inch

A) Damascus five barrel cluster, Liege proof, integral nipple shield on hammer, ring trigger, engraved frame and smooth bag shaped grips. BBL: 2 3/4

A) Two oval shaped spur display boards, one with two Belgian pinfire revolvers and six spurs mounted on a purple backing with a gold colored ornate fr

Makers marks and address in the flutes, standard markings on the un-numbered hammer, other parts match, engraved frame and smooth grips. In case with

A) Bead and notch sights, scroll and floral engraving and bag shaped checkered grip with lanyard ring. Metal cleaned. BBL: 5 1/2 inch solid rib St

A) Floral scroll engraved brass frame, barrel has the 1859 patent date markings. BBL: 3 inch octagon ribbed Stock: walnut Gauge: 22 Finish: b

A) No maker markings, checkered engraved pattern on frame. With wooden case (good). BBL: 4 5/8 inch solid rib Stock: Gauge: 11 PF Finish: blu

A) Fixed sights, standard markings, floral pattern grips. From the C.W. Slagle Collection. BBL: 2-1/2 inch round Stock: Gauge: 32 RF Finish:

A) Manufactured circa 1860s with standard markings and features with smooth ivory grips. BBL: 4 inch octagon Stock: Gauge: 32 Finish: blue

A) Manufactured between 1875 and 1910 with standard markings and features. Barrel rotates freely. BBL: 2 1/2 inch round Stock: Gauge: 41 RF F

A) Manufactured between 1863 and 1888 with standard markings. BBL: 3 3/8 inch ribbed Stock: Gauge: 32 RF Finish: nickel Grips: hard rubber

A) Manufactured between 1847 and 1865 with standard markings and features. Action needs work. BBL: 2 5/8 inch fluted Stock: Gauge: 34 Percussio

A) Manufactured between 1867 and 1888 with no visible markings and heavily pitted on barrel and frame. Action needs work. BBL: 2 1/2 inch part octa

A) Manufactured between 1858 and 1862 with standard markings and second issue features. Replacement gold dovetail front sight and left grip panel and

A) Produced from 1896-1916. Standard markings and features. BBL: 3-1/2 inch part octagon Stock: Gauge: 22 Finish: blue/nickel Grips: walnut

A) Standard markings and features with simulated pearl grips. Complete with Manhattan Firearms bullet mold. BBL: 2 1/2 inch round Stock: Gauge:

A) Brass furniture including the lock. Absent hammer with crudely repaired cracked wrist (wire wrapped), removed sling swivels and absent wood around

Manufactured from 1861 to 1874, cylinder marked "PATENTED APRIL 3, 1855, JULY 5, 1859 & DEC 18, 1860." around the center. Hinge has be...

Patented in 1860. Blade and notch sights, Hartford address on barrel, engraved frame, smooth grips and "Fanny E Benedict" inscribed on the...

A) Manufactured circa 1959-'63. Standard markings and features. Varnish on left panel crazing and chipped. In wooden Colt case(very good) with &...

A) Blade and hammer notch sight, Liege proofed barrel, fluted cylinder, bag shaped grips and lanyard swivel. BBL: 5 1/2 inch part octagon Stock:

A) Produced during WWII with "War Finish" and British proof markings on frame. Standard features and complete with grey canvas holster. ...

A) Manufactured between 1859 and 1874 with standard markings and features. BBL: 2 1/2 inch cluster Stock: Gauge: 22 RF Finish: blue/silver

A) Standard markings and features. Complete with wooden case, reproduction caps, tin, nipple tool and bullets. BBL: 7 3/4 inch octagon Stock: G

A) Made in Cincinatti. Fixed sights, makers mark on lock, drum-style conversion, double set triggers, brass forearm tip, straight grip and smooth butt

A) The lock is faintly marked "GOULCHER" in front of the hammer with deep pitting and engraved with a game bird scene to the rear of the h...

A) Manufactured in 1896 with standard markings on upper tang. Winchester Model 62A barrel, replacement stock and forearm. Stock does not fit correctly

A) Removed front sight with ladder rear sight (missing elevator bar). Engraved cylinder chambers, frame and trigger with wedges on the barrel. Crudely

A) Manufactured from 1863 to 1888 with standard markings and features. BBL: 3 3/8 inch four barrel Stock: Gauge: 32 RF Finish: blue Grips:

A) Left side of frame marked "BUNNEY" with the right "LONDON" in an engraved banners. Two proofs on underside of barrel. BBL: ...

A) Produced circa mid-1860s, standard markings and features, with a small "APC" stamped on butt. BBL: 3 1/2 inch octagon solid rib Sto...

A) Manufactured from 1888 to 1911 with standard markings and features with smooth pearl grips. BBL: 3 inch ribbed Stock: Gauge: 41 RF Finish:

A) Produced from 1868-82, standard markings and features. BBL: 1 5/8 inch cylinder Stock: Gauge: 22 RF Finish: silver Grips: brass Seri

A) Features screw-off barrel, bright floral scroll engraved frame and fitted with a one piece bag shaped walnut grip. Equipped with a folding trigger.

A) Manufactured in England. London proofs, marked "PARKERFIELD & SONS" on left frame and "LONDON" on the right. Folding tr...

A) Standard markings and features, hammer does not hold at full cock position. BBL: 2 1/4 inch octagon Stock: Gauge: 32 RF Finish: nickel

A) Made circa 1890. Fixed sights, floral engraving, folding trigger and birds head pearl grips. From the C.W. Slagle Collection. BBL: 1 1/2 inch rou

Standard markings and features with two-piece stag grips, six "U" marked rimfire cartridges and wood case. BBL: 3 inch round Stock: ...

A) Manufactured from 1888 to 1911 with standard markings and features. Chip missing in the bottom of the right grip, smoothed off. BBL: 3 inch ribbe

A) Manufactured in 1874 with standard markings and features. Matching serial number on the barrel and butt. BBL: 2 3/8 inch round Stock: Gauge:

Produced in the 1890s. Standard markings, matching numbers, checkered panels and smooth plunger. Mainspring absent. BBL: 1 3/4 inch round Stock:

A) Produced from 1859-74, standard markings and features with loose right grip panel and some minor pitting on barrels. Matching numbers. BBL: 3 in

A) Produced in 1875, standard markings and features. BBL: 2 3/8 inch round Stock: Gauge: 22 RF Finish: nickel Grips: walnut Serial Numbe

A) Manufactured between 1863 and 1888 with standard markings and features. Both grip panels are absent. BBL: 3 inch fluted Stock: Gauge: 22 RF

A) Marked "BLUE JACKET No 1 / PAT MARCH 29 1871" on the topstrap over the cylinder. Mechanically needs work, action doesn’t function. Fro...

Manufactured in 1907. In addition to the standard markings, this revolver is decorated with floral scroll, punch dot and geometric designs on the barr

Manufactured in 1929 with standard markings and features with steer head ivory grips. Large chip on right panel around steer's eye with stone mi...

Manufactured in 1904. Numbers match on frame trigger guard and grip strap. Charcoal blue screws, trigger, ejector head and cylinder pin. Fitted with s

Manufactured in 1901. In addition to the standard markings, the upper left front of the trigger guard and rear face of the cylinder are marked "...

Manufactured in 1898. In addition to the standard markings the revolver is decorated with floral scroll with punch dot background, sun burst designs a

The included factory letter confirms serial number, caliber, barrel length, with stocks not listed and the finish as blue. Letter states that revolver

Manufactured in 1894 with standard markings and features. The accompanying factory letter verifies the serial number, caliber, barrel length, blue fin

Manufactured in 1910 with standard markings and features and ill-fitting, replacement color mismatched ivory grips with gold Colt medallions and &qu...

Manufactured in 1881 with standard markings and features. The serial number has been re-cut with matching visible numbers. Ill-fitting and cracked gri

Manufactured in 1896 with standard markings. Rebarreled with light pitting on left side near muzzle. Complete with two-piece stag grips. BBL: 7 1/2

Manufactured in 1904. Standard markings and features, numbers match on frame, triggerguard and grip strap."3168" on the loading gate. Fron...

A) Made in 1906. Standard markings. Nickel barrel and cylinder. Matching frame and gripstrap numbers, and "245" on loading gate. Simulated...

Produced after 1976. Standard features, with gold inlaid barrel markings, Rampant Colt, and gold and silver eagle head on recoil shield, along with go

Manufactured in 1874, with the frame marked "U.S.". The trigger guard number does not match and the grip strap serial number is obliterate...

Standard markings and features. With custom Colt medallion ivory grips (non factory), raised carved steer head on the right panel. The accompanying fa