December 2, 3, & 4 Premiere Firearms Auction

Estimate: $900 - 1400 Manufactured without sights and mounted with a Leupold Vari-X III 3.5x-10x scope. One piece extra fancy checkered pistol grip

Estimate: $1100 - 1600 Manufactured for Colt by J.P. Sauer & Son of West Germany. Features a non-rotating bolt that makes the Colt Sauer acti...

Estimate: $1500 - 2000 Produced in Austria. The twist barrel is manufactured without sights and the receiver is tapped for scope mounting. The rece

Estimate: $1400 - 2000 The spiral heavy barrel is equipped with ramp blade and raised adjustable notch sights and is marked "SAI, Trussville...

Estimate: $1500 - 2250 The right side of the barrel is marked "SAI, CUMMING GA" and ".30-06 Spri" and the twist barrel is fit...

Estimate: $1000 - 1400 Features a non-rotating bolt that makes the Colt Sauer action smoother functioning than most. It was manufactured without si

Estimate: $1000 - 1800 The rifle features a non-rotating bolt that makes the Colt Sauer action smoother functioning than most. Standard markings, r

Estimate: $1000 - 1500 Manufactured for Colt by J.P. Sauer & Son of West Germany. Features a non-rotating bolt that makes the Colt Sauer acti...

Estimate: $800 - 1200 Manufactured in West Germany. Barrel manufactured without sights and marked with the single line Colt address on top. Feature

Estimate: $950 - 1400 Introduced in 1992. Manufactured without sights and mounted on a checkered one piece pistol grip stock with black rubber reco

Estimate: $950 - 1300 Introduced in 1994. Barrel is manufactured without sights, six round rotary magazine, and mounted on a checkered one piece st

Estimate: $900 - 1300 Barrel manufactured without sights, left of the receiver is marked with the model and serial number, the hinged floorplate is

Estimate: $900 - 1400 Introduced in 2007. Standard barrel and receiver markings, manufactured without sights, and fitted on a checkered pistol grip

Estimate: $950 - 1300 Introduced in 2007. Standard barrel and receiver markings, manufactured with no sights, and one piece checkered red rubber re

Estimate: $1200 - 1800 This was a Limited Edition, Reproduction of the famous Model 42 410 slide action shotgun. The shotgun was introduced in 1993

Estimate: $1400 - 2000 Manufactured in Japan in 1986. Blade front and adjustable rear sights. Standard barrel markings, as well as "1 OF 300...

Estimate: $1400 - 1800 Introduced in 2006. Features a single bead front sight on a matte vent rib, Invector Plus choke system, and 3 inch chambered

Estimate: $1200 - 2000 Manufactured in Belgium. Features lightweight barrel made without sights, the top of the receiver is drilled and tapped for

Estimate: $800 - 1300 Single ivory bead sight on the matte vent rib, 3 inch chamber with Invector Plus Choke System. Standard left rear barrel mark

Estimate: $1200 - 1800 Assembled in Portugal. Hooded ramped front and windage adjustable rear sights, standard markings, the top of the receiver is

Estimate: $900 - 1300 Standard markings, ramped blade front sight, folding leaf rear sight, the top of the action is drilled and tapped for scope m

Estimate: $1000 - 1400 Manufactured without sights, hinged floorplate is etched with the Ruger emblem, and is mounted on a checkered one piece pist

Estimate: $1000 - 1500 Manufactured without sights, hinged floorplate is etched with the Ruger emblem, and mounted on a checkered one piece pistol

Estimate: $950 - 1300 Introduced in 1987. Features fixed blade front sight and folding rear ring sight, and a smooth one piece stock with sling swi

Estimate: $900 - 1300 Introduced in 1984. Produced without sights, ring bases on the receiver, rotary magazine and checkered pistol grip stock with

Estimate: $900 - 1400 Introduced in 2007. Standard markings and features. Complete with factory box numbered to gun, scope rings, and lock. BBL:

Estimate: $1100 - 1600 Introduced in 1993. Features a ramp blade front sight; a raised, adjustable folding rear sight; and a Leupold M8-4X Compact

Estimate: $1200 - 1700 Ramp blade sight, adjustable leaf rear sight mounted on quarter rib machined to accept Ruger scope rings, and checkered pist

Estimate: $900 - 1300 Ramped blade front sight with brass bead and folding ramped rear sight, standard markings, hinged floorplate and mounted with

Estimate: $900 - 1200 Introduced in 1984. Produced without sights, scope ring bases on receiver and checkered pistol grip stock with solid recoil p

Estimate: $850 - 1200 Produced without sights, standard markings, and solid factory recoil pad. Comes with a factory box numbered to gun, two Ruger

Estimate: $1400 - 2250 In a hardwood display case with a brown leather sling. BBL: 18 inch round Stock: walnut Gauge: 45 ACP Finish: blue

Estimate: $1400 - 1800 Early pre-ban rifle with blade front, GI locking bar and M1Garand rear sights, with standard receiver markings, unmarked bol

Estimate: $1000 - 1500 These were produced between 1964 to 1968, when the Eagle Gun Company went bankrupt. All the designs, tooling, fixturing and

Estimate: $1400 - 1800 Produced by Sterling of England for Armalite. Adjustable post front and two-leaf rear sights, with a 3-prong flash hider, am

Estimate: $950 - 1400 A standard WWII M1 carbine (receiver) that has been completely embellished by the American Historical Society to commemorate

Estimate: $900 - 1400 This version of the XM15-E2S carbine has a post front sight/bayonet lug and an adjustable peep sight mounted on the carrying

Estimate: $1200 - 1600 Adjustable pin front, with fully adjustable M16A2 style peep rear sights, M16A2 flash hider, fixed carrying handle with forw

Estimate: $2750 - 4000 Imported after 1976. Post front and 4-position drum rear sights, bird cage flash hider on the threaded muzzle, ribbed and ch

Estimate: $900 - 1400 Rare rifle Manufactured in the mid to late 60s until the Eagle Gun Company went bankrupt. It functions as an open bolt design

Estimate: $1500 - 2000 This is the pistol version of the desirable SIG 556 rifle. It has a folding blade front sight with a picatinny style mountin

Estimate: $950 - 1400 Early pre-ban rifle with "NM062" blade front sight and "NM" rear aperature with hooded eyecup. Standard...

Estimate: $1200 - 1700 Birdcage flash hider, barrel marked "C MP 5.56 NATO 1/7", standard markings, with forward assist, flash hider an...

Estimate: $1200 - 1600 Features a finned barrel, compensator, fixed front sight, and folding ladder rear sight. Fitted with a vertical pistol grip

Estimate: $800 - 1200 Remington copy of the Colt AR-15 rifle. It has a standard barrel design and receiver-length Picatinny rail for adding optics.

Estimate: $1100 - 1700 Produced in Geneseo. The back of the receiver is marked "U.S. RIFLE M1A/SPRINGFIELD/ARMORY circled T" over the s...

Estimate: $950 - 1500 Produced before 1994. Standard M16A1 two position rear sight with post front sight, a birdcage flash hider, bayonet lug, ribb

Estimate: $1000 - 1500 Adjustable post and two-leaf peep sights, with a birdcage flash hider on the "C MP CHROME BORE" barrel, standard...

Estimate: $900 - 1300 Introduced in 1992. Post-ban version of a AR-15 style rifle. Barrel is equipped with a birdcage flash hider, ribbed forearm,

Estimate: $800 - 1300 Post and 4-position aperture sights, 2-position selector, checkered forearm and smooth pistol grip and buttstock. Housed in a

Estimate: $800 - 1300 Made in China and imported by SILE of New York City. Stamped receiver, post and tangent sights, with the maker's and im...

Estimate: $1300 - 1900 This is the chrome plated version with rubber Firestone tires.Three line W.R.A. Co./made in U.S.A. trademark information on

Estimate: $1300 - 1800 All blue finish with the three-line W.R.A. Co./Made in U.S.A trademark information on the sides of the carriage, top of the

Estimate: $1400 - 2250 This is the brass version with rubber Firestone tires.Three-line W.R.A. Co./made in U.S.A. trademark information on the sid

Estimate: $1100 - 1600 Standard blank firing, breech loading Winchester signal cannon. The cannon is designed to fire a 10 gauge 2 7/8 inch blank c

Estimate: $3000 - 5000 The 2 3/4 inch flat wood frame has a 1 1/4 inch gold liner leaving a 49 inch by 32 inch board printed in full color. The cen

Estimate: $2500 - 3500 1) "Celebrated Winchester Repeating Rifles Shot Guns and Ammunition" felt sign (see image). In a 14 3/4 inch x 1...

Estimate: $950 - 1600 All are Winchester commemorative plates: Theodore Roosevelt (5 7/8 inch diameter), Model 94 Cowboy, A Century of Leadership,

Estimate: $4000 - 6000 The included letter from antiques dealer Bill Hatfield confirms that this 2nd Generation Henry Rifle was built by Thomas Haa

Estimate: $4000 - 6000 Standard markings and features. Complete with hardwood presentation case, commemorative crystal disk, original picture sleev

Estimate: $1000 - 1600 Standard markings and features of the Model 1866 Gustave Young tribute rifle. BBL: 24 inch octagon Stock: walnut Gauge

Estimate: $1000 - 1400 Standard markings and features of this commemorative rifle. Complete with original box numbered to gun and manual. BBL: 26

Estimate: $800 - 1300 Introduced in 2000. Features a gold bead front sight and adjustable rear buckhorn sight, and tang safety. Checkered Schnabel

Estimate: $1300 - 1800 Manufactured in Japan with the standard markings and features for this model. Complete with original box numbered to gun.

Estimate: $1200 - 1600 This rifle commemorates the 200th Anniversary of Oliver Winchester's birth. The receiver and forend cap are silvered w...

Estimate: $1200 - 1600 Made in Japan, this Classic features a fixed front sight and adjustable buckhorn rear sight. The left side of the barrel is

Estimate: $1500 - 2250 Standard markings/engraving and features. Complete with original box numbered to gun. BBL: 26 inch octagon/round Stock

Estimate: $1500 - 2500 Manufactured in 2007 to commemorate the 100th Anniversary of John Wayne's birth. Floral scroll engraved pewter plated ...

Estimate: $1000 - 1800 Introduced in 1999. Features a ported barrel, hood front sight, flip up rear sight, and cross bar safety. Mounted with a che

Estimate: $1000 - 1500 Standard markings and features of the Centennial 66 Commemorative rifle. Complete with box numbered to the gun. BBL: 26 in

Estimate: $1000 - 1500 Standard markings and features of the John Wayne Commemorative carbine. Complete with original box numbered to gun, shipping

Estimate: $800 - 1200 Standard markings and features of the Legendary Lawmen Commemorative carbine. Complete with original picture sleeve box numbe

Estimate: $1000 - 1500 Manufactured prior to 2003 without the tang mounted safety, this shotgun version of the old standby Model 94 rifle was intro

Estimate: $1300 - 1800 Standard barrel and receiver markings, blade front sight, adjustable buckhorn rear sight, and offset hammer. Fitted on a che

Estimate: $950 - 1600 Manufactured in 1936. Features a hooded ramp blade front sight, adjustable buckhorn rear sight, and bolt drilled for sight mo

Estimate: $800 - 1200 Standard markings and features of the Canadian Pacific Centennial Commemorative rifle. Complete with a wood case and picture

Estimate: $1000 - 1500 Standard commemorative markings and features of this commemorative. Complete with picture sleeve box numbered to gun, hang t

Estimate: $1000 - 1400 Standard markings, hooded front sight, flip up rear sight, cross bolt safety and mounted with checkered walnut forearm and s

Estimate: $900 - 1400 Standard markings and features of the Legendary Lawmen Commemorative carbine. Complete with original picture sleeve box numbe

Estimate: $950 - 1200 Standard markings and features of the RCMP commemorative, with papers and original picture box numbered to gun. BBL: 22 inc

Estimate: $2000 - 3000 Standard markings and features. Complete with the original picture sleeve box numbered to gun, papers, and hanging tag. BB

Estimate: $1000 - 1300 Standard markings and features, with original box (sleeve absent) numbered to gun, hanging tag, papers, and shipping box con

Estimate: $1200 - 1800 Introduced in 1978. Standard markings and features of this model. Complete with original box numbered to gun. BBL: 20 inch

Estimate: $1600 - 2250 This is one of five hundred Custom Grade Model 94 Rifle produce celebrating O. Winchester's 200th birthday. The rifle ...

Estimate: $800 - 1300 Standard Dale Earnhardt Model 95AE Rifle numbered "150-1000" with papers, collector's case, and shipping box....

Estimate: $1200 - 2500 Barrel was manufactured without sights, the rear of barrel and top of receiver have been drilled and tapped for scope mounts

Estimate: $1500 - 2500 Standard markings and features of the Limited Edition Centennial rifle. Complete with box numbered to gun. BBL: 26 inch pa

Estimate: $3000 - 4500 Part of a matched set. Made in Japan. This Custom Grade features an all blue finish with finely floral scroll engraved recei

Estimate: $1000 - 1500 Beaded blade and sporting type rear sights, standard markings and smooth straight grip stock. Comes with factory box numbere

Estimate: $800 - 1300 Sightless barrel with a scope rail mounted to the rear. Standard barrel and frame markings, and fitted with smooth right fing

Estimate: $750 - 1200 Standard markings with ramped blade front and adjustable rear sights, and finger groove grips. Complete with original box num

Estimate: $350 - 500 Fixed ramped front sight, adjustable rear sight, and fitted with a right handed finger groove target grips. Skeletonized hamme

Estimate: $900 - 1300 Equipped with a sightless Bullberry/Utah barrel and a Tasco scope rail attached to it. Standard frame markings. Fitted with s

Estimate: $800 - 1200 Standard barrel markings with ramp blade front and adjustable rear sights, and finger groove grips. Complete with original bo

Estimate: $850 - 1200 Standard barrel and frame markings with a ramped front sight and adjustable rear sight. Fitted with checkered Pachmayr grips

Estimate: $750 - 1000 Standard markings, fixed front sight, adjustable rear sight, and fitted with smooth finger groove and thumb rest grips. Accom

Estimate: $1000 - 1600 Manufactured without sights, dual set triggers, and mounted with a Redfield 3-9X Variable scope. Fitted on a checkered forea

Estimate: $1000 - 1500 This pistol is a limited edition of only 500 and is completed finished in 24 karat gold plating, nearly full coverage of oak

Estimate: $950 - 1300 White dot sights, ambidextrous thumb safety, adjustable trigger, skeletonized hammer, and scale slide serrations. Fitted with

Estimate: $800 - 1400 Assembled in Portugal. Tangent rear sight, ambidextrous safety and checkered grips. With Browning case numbered to gun, paper