241

Collection of Roy Rogers "King of The Cowboys" One-of-a-Kind Cased Prototype Limited Edition Revolve

Currency:USD Category:Antiques / Firearms & Armory Start Price:3,250.00 USD Estimated At:6,500.00 - 12,000.00 USD
Collection of Roy Rogers  King of The Cowboys  One-of-a-Kind Cased Prototype Limited Edition Revolve
Buyer's Premium is 20.5% by credit card, reduced to 18% if payment is made by cash, check or wire transfer. Contact Rock Island Auction Company to complete your registration with the auction house.

Estimate: $6500 - 12000
A) This impressive collection was done by Gunsmith Ron Mahovsky who was a personal friend of Roy Rogers. Ron colllaborated with Roy on designing a customized limited edition Roy Rogers handgun series using Ruger single action revolvers. This lot consists of a number of Limited Editions and prototypes. Five unissued/un-numbered letters of authenticity signed by Roy Rogers accompany this lot. In addition there are several photographs of Roy Rogers, an order form and pamphlet regarding the set, and copies of publications about the collection and some other personal information on Roy Rogers, all in a walnut binder. There is also approximately 125 copies of the 45 rpm record of the song "King of The Cowboys" sung by Roy Rogers Jr., a VCR tape of the "Great Cowboy & Indian Gun Trade" held at the MGM Grand Hotel, Reno, Nevada, March 1986, two video CDs and three records ledgers with some handwritten entries. There is also a 34 inch by 28 inch framed artist proof poster with Roy Rogers in the center surrounded by action pictures from his TV show, signed "Happy Trails/Roy Rogers/Trigger". Stainless steel with a gold hammer, trigger, loading gate, hammer and trigger pin, screws and cylinder pin release. It has the standard barrel and frame markings and in addition the right side of the barrel is engraved with the gold filled signature of Roy Rogers, the top of the ejector housing is engraved "1 of 5000 Prototype", the cylinder is engraved with gold filled "R/R" and the the right rear of the frame is engraved with a gold filled rearing Trigger. Standard ramped blade front and adjustable rear sights and fitted with very nicely figured walnut grips with Roy Rogers on a rearing Trigger carved on each side. The revolver is in a nice custom glass lid black walnut case with padded royal blue velvet lining with "B", "C" and "D" of this lot. In the case are two brass plaques with the likeness of Roy Rogers and marked "LIMITED EDITION/5000/No. 1(two numbers electro penciled scratched off) OF 5000/(electro penciled PROTOTYPE" and "LIMITED EDITION/75/No. 1OF 75/PROTOTYPE".
BBL: 6 1/2 inch round
Stock:
Gauge: 357 magnum
Finish: stainless steel/gold
Grips: walnut
Serial Number: 3258483
Condition: Excellent. The revolver retains 99% original stainless steel finish showing some wear and minor scratches on the muzzle, a faint drag line on the cylinder and a few overall scattered light scratches and handling marks. The gold parts retain virtually all of the gold finish and almost all of the gold fill in the signature and Trigger remains. The grips are near new with only the slightest handling marks. The records remain excellent in their original packaging. The poster is excellent. The case is also excellent.
- B) The second in the four gun 1 of 5,000 Limited Edition Roy Rogers prototype revolvers. Stainless steel finish with gold hammer, trigger, cylinder pin release, hammer and trigger pins, and frame screws. The right side of the barrel is engraved with the gold filled signature of Roy Rogers, the top of the ejector housing is engraved "1 of 5000 Prototype", the cylinder is engraved with a gold filled likeness of Roy Rogers and the right rear of the frame has a gold filled joined "R/R" brand. Standard barrel and frame markings and features with smooth simulated ivory grips with trigger on the bottom of both sides. In the case with "A", "C" and "D".
BBL: 5 1/2 inch round
Stock:
Gauge: 44 Magnum
Finish: stainless steel
Grips: simulated ivory
Serial Number: 8512579
Condition: Excellent. The revolver retains 99% plus original finish with some minor scratches on the muzzle and cylinder, and a few light handling marks overall. All of the gold fill and gold finish remains. The grips are excellent with a some imperfection on the lower right panel. Note: there is a note in the case that states that this revolver was originally sold with a 7 1/2 inch barrel.
- C) The third in the four gun 1 of 5,000 Limited Edition Roy Rogers prototype revolvers. Stainless steel finish with matte stainless on the grip frame, and gold finished hammer, trigger, loading gate, hammer and trigger pins and screws. The right side of the barrel has the gold filled signature of Roy Rogers, the top of the ejector housing is engraved "1 of 5000 Prototype", the top strap has the gold filled joined "R/R" brand on the right side of the frame has a gold filled Roy Rogers riding a jumping Trigger. The revolver has the standard barrel and frame markings with the caliber "45 LC CAL." crudely electric pencil marked. Standard features with attractive dark laminated grips with white filled Roy Rogers on a rearing Trigger on each side. In case with "A", "B" and "D".
BBL: 4 3/4 inch round
Stock:
Gauge: 45 LC
Finish: stainless steel
Grips: laminated
Serial Number: 4730021
Condition: Excellent. The revolver retains 99% plus polished and matte stainless finish, showing some light handling marks and faint, barely noticeable drag line on the cylinder. All of the gold finish and gold fill in the engraving remains. The grips are as new. Note: There is a note in the case that states that this revolver was sold with stag grips.
- D) This is one of the 1 of 75 Limited Edition Roy Rogers Happy Trails prototype revolvers. Stainless steel finish with gold hammer, loading gate, trigger, grip frame, cylinder pin release, and hammer and trigger pins. The right side of the barrel has gold filled Roy Rogers signature, the top of the ejector housing is engraved "1 of 75 Prototype", the top strap has gold filled "Happy Trails" and the right side of the frame has the joined "R/R" brand. Standard barrel and frame markings. This revolver is the 38-40 Win./10mm convertible, however the 10mm cylinder does not come with the revolver. Standard features with smooth simulated pearl grips with Roy Rogers on a rearing Trigger on both sides.
BBL: 4 3/4 inch round
Stock:
Gauge: 38-40
Finish: stainless steel
Grips: simulated pearl
Serial Number: 61101058
Condition: Excellent with virtually all of the stainless steel and gold finish remaining, showing some light scratches and handling marks. All of the gold fill remains in the engraving. The grips are a bit loose, but are as new. Note: There is a note in the case that states that this revolver was sold with a 5 1 1/2 inch barrel and epoxy ivory grips.
- E) The receiver and barrel bands are gold plated, with a gray stainless steel finish on the remaining parts. The left rear of the barrel has the standard marking with the Winchester oval proof on the top of the barrel at the breech. The left side of the receiver is engraved with the joined "R/R" brand, "A GREAT AMERICAN HERO" and the likeness of Roy Rogers. The right side has the same brand and Roy Rogers on a rearing Trigger. The upper tang is engraved "Happy Trails" and the bottom of the receiver is marked "PROTOTYPE 1888". Standard blade front and adjustable rear sporting sights and mounted with a ivory colored painted hardwood forearm and straight grip stock with a checkered plastic Winchester buttplate. The left side of the forearm is carved with the signature of Roy Rogers and the left rear of the stock depicts Roy on a rearing Trigger over "KING OF THE COWBOYS".
BBL: 16 1/2 inch round
Stock: hardwood
Gauge: 30-30 Win
Finish: stainless steel/gold
Grips:
Serial Number: 3256987
Condition: Excellent. All of the stainless steel and gold finish remains, showing a few scattered light scratches and handling marks on the receiver. There is a burr on the frame screw directly above Roy's head on the left side of the receiver. The forearm and stock are also excellent with a few minor dings and handling marks.
- F) This revolver is one of the Happy Trails Limited Edition 1 of 75 prototype revolvers. Stainless steel finish, with gold remaining parts, grip frame, hammer, loading gate, cylinder pin release, and the hammer and trigger pins. The right side of the barrel is gold filled engraved with the signature of Roy Rogers, the top of the ejector housing has a gold filled "1 of 75 Prototype", the top strap has gold filled "Happy Trails" and the right side of the frame has the gold filled joined "R/R" brand. Standard ramped blade front and adjustable rear sights, standard barrel and frame markings and fitted with simulated ivory grips with Roy Rogers on a rearing horse (Trigger) on each side. Note, this is a convertible 38-40/10mm revolver, however the 10mm cylinder does not come with the revolver. Complete in a light oak display case with plexiglass lid and sides. There is a brass plaque on the inside which reads "LIMITED EDITION/75/No. 1 of 75" over the signature of Roy Rogers and the likeness of Roy.
BBL: 5 1/2 inch round
Stock:
Gauge: 38-40
Finish: stainless steel
Grips: simulated ivory
Serial Number: 61100694
Condition: Near new with only the slightest handling/storage marks. The case is excellent.
- G) This is another of the 1 of 5,000 Limited Edition Roy Rogers prototype revolvers. The revolver is stainless steel with gold hammer, trigger, cylinder pin release, and hammer and trigger pins. The barrel and frame have the standard markings and the cylinder is marked ".22 WIN. MAGNUM CAL" followed by the Ruger logo around the rear. The right side of the barrel has gold filled signature of Roy Rogers, the top of the ejector housing has "1 of 5000 Prototype" and the cylinder has two gold filled likenesses of Roy Rogers on a rearing Trigger. Standard ramped blade front and adjustable rear sights and fitted with nicely figured dark walnut grips with the joined "R/R" brand at the tops of both sides and Roy on a rearing Trigger at the bottom. Complete is a very nice amish made oak display case with blue lining. The lid has a contrasting border and is carved with the likeness of Roy on a rearing Trigger above "KING OF THE COWBOYS". On the inside is a brass plaque which reads "LIMITED EDITION/5000/No. 1 OF 5000/ (electro penciled) PROTOTYPE", Roy Rogers signature and the likeness of Roy. Also in the case is an extra 22 LR cylinder.
BBL: 5 1/2 inch round
Stock:
Gauge: 22 win magnum
Finish: stainless steel
Grips: walnut
Serial Number: 26055988
Condition: Excellent. The revolver retains 99% plus stainless steel finish with some very mild muzzle wear and a faint cylinder drag line. All of the gold finish remains. The grips are as new. The case is excellent.
- H) This is another Prototype Limited Edition 1 of 75 Roy Rogers revolver. The frame and trigger guard are gold and the remaining parts are stainless steel. The left side of the barrel has the standard Ruger markings, the standard left side markings are absent and the serial number is on the right side of the frame. The right side of the barrel has Roy Rogers signature, the top of the ejector housing has "1 of 75 Prototype" and the cylinder has the likenesses of Roy Rogers on a rearing Trigger. Blade front and frame notch rear sights and fitted with stag grips. The revolver is complete in an amish made custom walnut display case with dark chocolate brown lining. The lid has a contrasting border and carved with the likeness of Roy on a rearing Trigger over "KING OF THE COWBOYS". The inside of the case has a brass plaque which reads "LIMITED EDITION/75/No. 1 of 75/PROTOTYPE" over the signature of Roy Rogers and the likeness of Roy. In the case is a gold and silver belt buckle with relief "ROY ROGERS" at the top "KING OF THE COWBOYS" on the bottom and Roy in the center flanked by Bullet and Trigger.
BBL: 4 inch round
Stock:
Gauge: 22
Finish: stainless steel/gold
Grips: stag
Serial Number: 9156197
Condition: Excellent plus. The revolver retains virtually all of the stainless steel and gold finish, showing a few light scratches and handling marks. The grips are as new. The case and buckle are both excellent. This is truly a one-of-a-kind prototype set of revolvers and a carbine celebrating the King of The Cowboys Roy Rogers.