1095

Cased Inscribed Colt Model 1849 Percussion Pocket Revolver

Currency:USD Category:Antiques / Firearms & Armory Start Price:2,250.00 USD Estimated At:4,500.00 - 6,500.00 USD
Cased Inscribed Colt Model 1849 Percussion Pocket Revolver
Buyer's Premium is 19.5% by credit card, reduced to 17% if payment is made by cash, check or wire transfer. Contact Rock Island Auction Company to complete your registration with the auction house.
Manufactured in 1853. The top barrel flat is marked "{ADDRESS SAML COLT/NEW-YORK CITY}", the left side of the frame is marked "COLTS/PATENT" and the cylinder is engraved with the stagecoach holdup scene, as well as marked "COLTS PATENT/62558". The upper left front of the trigger guard is marked with the number "2". The complete matching serial number is marked on the bottom of the barrel lug, frame, trigger guard, cylinder and back strap, with the partial number "2558" on the loading lever and wedge and "558" on the cylinder pin. The back strap is inscribed "P.M. Armington". The barrel and cylinder were blue, back strap and trigger guard are silver and the remaining metal surfaces were casehardened, fitting with a smooth one-piece varnished walnut grip. Complete in an early pattern Baby Dragoon style case with Paterson style beveled lid and blue lining with three compartments. The case includes a Colt powder flask with the "COLTS/PATENT" over stars/eagle shield/crossed revolvers and "E. PLURIBUS UNUM" in a banner motif, a brass bullet mold with Colt and "S" marked iron sprue cutter, nipple wrench/screwdriver and a 100 count Eley Bros. cap tin partially full.
BBL: 6 inch octagon
Stock:
Gauge: 31 percussion
Finish: blue/casehardened/silver
Grips: walnut
Serial Number: 62558
Condition: Very good. The metal surfaces have a smooth dark mottled patina with some flashes of original case colors in protected areas. The trigger guard and back strap retain 98% of the period applied silver plating. The grip is very fine with much of the original varnish, showing some lower edge wear and a few minor dents. The action needs work, the cylinder does not rotate when the hammer is cocked, the hammer spring is weak and it does not discharge when the trigger is pulled. The cylinder scene is at least 98% visible and the markings are clear. The case is very good with some contact wear on the otherwise fine lining. The flask is very good retaining 40% of the original lacquer finish, the mold has an aged patina on the brass and a mottled grayish brown patina on the sprue cutter and readable markings. Research on P.M. Armington may prove interesting but we have not done so.