AUCTION VIII

Bronze silver plated, one part construction, size 51,5 x 50,9 mm; screw on reverse, circular deepening on reverse. Signs of age and wearing (!?).

Two miniature-badges in different versions. Both silver, averse orange enamelled, diam. 18,4 and 19,5 mm; with screws on reverse, Polish hallmark

Silver patinated one part cut out construction, size 32,.5 x 32,5 mm; screw on reverse, Polish hallmarked, maker's mark "AN" + "&...

Silver gilt, averse enamelled, inscription "2/PAP LEG", superimposed crowned silver eagle, two parts construction, size: 35,3 x 42,7 mm

Silver patinated, averse enamelled, inscription "2 PAL LEG", superimposed thin "Pilsudski Brigade Badge", two parts construct

Silver, partially gilt, averse partially enamelled, inscription "4/1918 P.A.L. 1920", four parts cut out construction, size 33,1 x 40,5

Silver with tiny traces of former gilding, averse enamelled, inscription "7 XI/1918/1928", superimposed coat of arms of LWOW with order

Silver, centre averse enamelled and gilt, four parts construction, size 43,6 x 43,9 mm; screw on reverse, nut is missing, three rivets on reverse

Silver patinated, averse partially gilt and enamelled, inscription "19 PAL/15. X. 18", two parts construction, size 32,2 x 35,4 mm; scr

Bronze gilt, averse enamelled, three parts construction, inscription on centre "1920/20. P. P. L." (??), diameter 39,1 mm; screw on rev

Silver gilt, averse enamelled, three parts contruction, size 40,3 x 39,7 mm; screw on reverse, maker's mark "A. NAGALSKI: SKA, Warszawa...

Silver, partially gilt, patinated, enamelled flag, one part construction with profile-stamped reverse, size 30,7 x 52,6 mm; screw on reverse, mak

Silver with dark patina, averse partially enamelled, one part construction, size 39,8 x 40,0 mm; screw on reverse, maker's mark "W. GONTARCZ

Silver, averse partially enamelled, cannons are gilt, two parts construction, size 39,8 x 39,6 mm; screw on reverse, maker's mark "â€&...

Tombak silver plated with dark patina, four parts cut out construction with profile-stamped reverse, boundary post and circular shield enamelled,

Silver patinated, Polish crowned eagle, partially enamelled, two parts cut out construction, size 33,2 x 48,6 mm; screw on reverse, maker's mark

Bronze gilt, averse partially dark green enamelled, superimposed silver eagle, two parts construction, size 31,0 x 53,8 mm; screw on reverse, mak

Tombak sheet gilt, averse dark green enamelled, superimposed silver eagle, two parts construction with profile-stamped reverse, size 57,8 x 58,3

Tombak with patina, one part cut out construction, diam.: 39,4 mm, screw on reverse, maker's mark "Stanislaw REISING, Warszawa...". Sma

Tombak, dark iron oxidized, one part cut out construction with semi-profile stamped reverse, diameter 40,4 mm; screw on reverse. Very impressive

Silver with dark patina, centre shield with black enamel, three parts cut out construction, size 36,2 x 52,6 mm; screw on reverse, maker's mark ...

Tombak with artificial verdigris on both sides, one part construction with profile-stamped reverse, inscription on small enamel label "WILNO

Thin brass silver plated and patinated, one part construction with profile-stamped reverse, size 34,6 x 43,5 mm; screw on reverse, numbered &quot

Bronze silver plated and patinated, one part cut out construction of solid quality, size 45,9 x 25,8 mm; screw on reverse, numbered "993&quo

Silver patinated, one part cut out solid construction, size 37,1 x 38,2 mm; screw on reverse, maker's mark "W. GONTARCZYK, Warszawaâ€&...

Silver patinated, one part cut casted version, size ca. 34 x 36 mm; thin pin on reverse with tiny hook, stamped "SILVER". Probably out

Bronze gilt, averse enamelled, two parts construction, size 37,5 x 37,5 mm; screw on reverse, maker's mark "ZJEDN. GRAWERZY WARSZAWAâ€...

White metal patinated, two parts construction with profile-stamped reverse, diam.: 39,5 mm; screw on reverse, maker's mark "Fr.MALINA, Krako

Bronze silver plated, averse enamelled, two parts construction, size 39,6 x 39,6 mm; screw on reverse, maker's mark "W. GONTARCZYK, Warszawa

Silver, superimposed banner enamelled, two parts construction, diameter 44,7 mm; screw on reverse, maker's mark "ZJEDNOCZENI GRAWERZY, Warsz

Silver corpus with dark blued iron inlay, silver centre dragon, three parts construction, size 39,7 x 39,5 mm; screw on reverse, two rivets. Exce

Bronze silver plated, averse enamelled, superimposed silver plated helmet, two parts construction, size 39,7 x 39,9 mm; screw on reverse, ornamen

Riding Badge, bronze, numbered "809", 16 x 17,1 mm, "W. GONTARCZYK…"; For Marksmanship, tombak gilt, 31,9 mm, "...

Lot of 3. Tombak gilt, one part construction, diam.: 31,3 mm; screw on reverse, maker's mark "W.GONTARCZYK, Warszawa...", with red felt

Lot of 3. Tombak gilt, centre averse enamelled, two parts construction, diam.: 30,9 mm; screw on reverse. WES. 575 var. Tombak silver plated

Lot of 3. Bronze gilt, averse partially enamelled, one part cut out construction, size 27,8 x 31,8 mm; screw on reverse, inscription on reverse:

Lot of 3. Tombak, one part cut out construction, size 41,0 x 41,3 mm; screw on reverse, maker's mark illegible. Significant signs of wearing and

Silver patinated, averse partially enamelled, two parts cut out construction, Polish hallmark and maker's mark on averse ("JM"), size 5

Tombak silver plated and patinated, centre shield enamelled, three parts cut out construction with profile- stamped reverse, diameter 38,7 mm; sc

Bronze silver plated, averse partially enamelled, one part construction, size 39,7 x 39,8 mm; screw on reverse, maker's mark "St. NIEMCZYK,

Brass silver plated and partially gilt, two parts cut out construction (superimposed "SP") with profilestamped reverse, size 61,9 x 42,

Silver with dark patina, superimposed bronze letters, four parts massive construction, size 63,1 x 16,0 mm; screw on reverse, maker's mark "

Tombak, averse enamelled, superimposed part bronze, two parts construction, size 40,8 x 40,4 mm; screw on reverse, nut is missing. Small signs of

Thin tombak sheet, one part cut out construction with profile-stamped reverse, size 26,5 x 13,7 mm; screw on reverse with nut, no maker or any ma

Brass casted, silver plated, one part construction, size 33,0 x 22,7 mm; screw on reverse. Significant signs of wearing! Early production quality

Tombak silver plated, averse mostly reddish-brown enamelled and numbered "21153", one part construction with profile-stamped reverse, s

Silver, averse enamelled, one part construction, diam.: 23,7 mm; screw on reverse, British hallmarked, maker's mark "K&S". WES. 656

Silver gilt, averse enamelled, one part construction, size 19,1 x 19,1 mm; two metal loops with iron bolt, reverse stamped "SILVER". Ex

White metal silver plated, partially patinated, one part cut out construction, with two loops and tiny hanger chain, size 62,9 x 39,2 mm; screw o

Bronze silver plated and patinated, one part cut out construction with profile-stamped reverse, two loops and tiny hanger chain, with hook, size

Silver patinated, wreath gilt, one part construction, size 59,7 x 36,9 mm; with tiny hanger-chain and hook, screw on reverse, maker's mark "

Bronze silver plated and partially patinated, wreath gilt, one part cut out construction, size 62,7 x 38,9 mm; with tiny hanger-chain and hook, s

Brass silver plated and patinated, with gilt wreath, one part cut out construction, two strong loops and hanger chain with hook, size 63,6 x 40,5

Bronze silver plated, wreath with green enamel, one part cut out construction, two loops with tiny hanger chain and hook, size 61,5 x 38,5 mm; sc

Tombak silver plated, wreath with green lacquer, one part cut out construction with profile-stamped reverse and hanger chain with hook, size 62,6

Silver patinated, wreath with green enamel, one part cut out construction, two tiny loops with short tiny hanger chain with hook, size 62,9 x 38,

Tombak silver plated and patinated, one part construction, screw on reverse has been removed, with tiny hanger chain, size 60 x 40 mm. Significan

Brass bronzed, one part cut out construction with profile-stamped reverse, with two loops and hanger chain with hook, size 65,0 x 40,5 mm; screw

Tombak gilt, green lacquered wreath, one part cut out construction, two tiny loops with short hanger chain, size 64,1 x 40,3 mm; screw on reverse

Brass gilt and oxidized, polished lightings, one part cut out construction, two loops with tiny hanger chain with hook, size 64,3 x 41,2 mm; scre

Lot of four different versions: Three versions of 1st class badge: all white metal, different designs, all one part cut out constructions, sizes betwe

Lot of two different versions: one white cast metal, smaller model, numbered on reverse "029" (casted from the original patter

Bronze casted, two parts cut out construction with rotatable propeller of aluminium, size 53,6 x 45,0 mm; screw on reverse. Interesting design but cru

Tombak, averse lacquered (black, green, red, silver), one part construction, size 37,0 x 37,6 mm; screw on reverse, inscription on reverse "NIEMC

Cloth badge, black and yellow with aluminium embroidery-thread, size ca. 37 x 72 mm. Good quality and condition, small signs of wearing! WES. 713 var.

Lot of two different versions: both tombak silver plated and patinated, averse partially enamelled, one part construction, size 19,1 x 56,5 mm and 18,

White metal dark blue oxidized, one part construction, size 28,3 x 54,5 mm; screw on reverse, maker's mark "FILSKI/LONDON". Simple exi...

White metal nickelled, one part cut out construction, size 20,0 x 36,5 mm; screw on reverse, numbered "000036"; bolt badly sold

Silver patinated, one part cut out construction with profile-stamped reverse, size 35,7 x 49,9 mm; screw on reverse. Fine design and quality! WES. 720

White metal silver plated, centre enamelled (tombak), three parts cut out construction, size 40,2 x 41,7 mm; screw on reverse, maker's mark &quo...

"POLAND"-Insignica (4x/one in celluloid, WES 773 Var), HEADQUARTERS-Command (WES 781), 2nd POLISH CORPS (WES 782), 8th BRITISH ARMY (Monte C

Lot of 3. White metal silver plated and patinated, one part cut out construction with profile-stamped reverse, diam.: 31,9 mm; screw on reverse with s

White metal silver plated and patinated, averse partially dark blue and red (centre) enamelled, one part construction, size 32,3 x 45,0 mm; vertical p

Copper sheet, averse engraved, one part construction, size 50,2 x 51,0 mm; screw on reverse, small new nut. Plain handmade quality with small differen

White metal silver plated and patinated, two parts cut out construction, size 39,5 x 39,1 mm; screw on reverse, maker's mark "B.GRABSKI, Lo...

Lot of 2. White metal sheet, one part cut out construction, diam.: 28,5 mm; long vertical pin on reverse, red silk background, grey cover on reverse.

Bronze gilt, averse partially enamelled, four eagles silver plated and patinated, two parts cut out construction with semi-profile-stamped reverse, si

Silver with black patina, centre with red enamel background, superimposed centre part black and dark olive toned, two parts cut out construction, size

Bronze gilt or silver plated, cross averse enamelled, two parts cut out construction, size 51,0 x 50,8 mm; screw on reverse, with supplementary disc a

Silver, partially gilt, cross and centre averse enamelled, six parts construction, size 62,4 x 60,6 mm; horizontal wide pin on reverse; the eagles are

Tombak silver plated and patinated, one part construction, diam.: 45,0 mm; screw on reverse. Fine quality! WES. 828 I-II

Small Latin cross, tombak silver plated, with superimposed Polish eagle with "IK", two parts construction, size 12,6 x 22,5 mm; screw on rev

Small Latin cross, iron black lacquered, with superimposed Polish eagle with "1K", two parts construction, size 21,0 x 39,5 mm; screw on rev

Bronze silver plated, averse partially enamelled, two parts construction, size 31,0 x 42,0 mm; screw on reverse. Some signs of wearing, tiny enamel da

Tombak silver plated, averse partially enamelled, one part construction, size 43,0 x 53,5 mm; screw on reverse, maker's mark "J. KNEDLER, W...

Silver with dark patina, averse partially enamelled, one part construction, size 43,4 x 53,9 mm; screw on reverse, maker's mark "J.KNEDLER,...

Bronze silver plated and patinated, superimposed light bronze shield, two parts cut out construction, size 31,6 x 55,5 mm; screw on reverse, maker&#...

Silver patinated, one part cut out construction, size 31,6 x 50,0 mm; screw on reverse, screw bolt was repaired, nut is missing. Handmade private badg

Bronze-alloy silver plated, with dark patina, one part construction with profile-formed reverse, size 50,8 x 51,6 mm; screw on reverse. Large attracti

Thin tombak sheet, one part construction with profile-stamped reverse, diam.: 39,7 mm; horizontal safety pin on reverse. WES. 847 II

Tombak silver plated, with dark patina, partially silver polished, one part construction, size 47,1 x 32,5 mm; vertical pin on reverse. Superb design

Tombak, one part construction with profile-stamped reverse, small signs of silver plating, size 42,3 x 42,5 mm; screw on reverse. Some signs of wearin

Large badge, tombak, superimposed silver plated skull, two parts cut out construction with red silk (on cardboard) background, size 116,6 x 41,5 mm; s

Bronze silver plated, dark patina, one part massive construction, size 46,1 x 50,5 mm; reverse blank, numbered "569", with loop and suspensi

Brass casted, silver plated and patinated, one part construction, size 49,3 x 56,1 mm; reverse blank, with loop for suspension, with new ribbon. Attra

Thin tombak sheet silver plated, one part cut out construction with profile-stamped reverse, size 40,0 x 51,9 mm; screw on reverse, nut is missing. Sm

Bronze casted, partially with dark patina, massive heavy casted one part construction, size 50,0 x 55,6 mm; reverse blank, with loop for suspension, w

Brass silver plated, superimposed small Polish Legion eagle (tombak silver plated), two parts construction, diam.: 40,4 mm; screw on reverse. Heavy ca

White metal silver plated, averse patinated, one part construction, size 28,0 x 39,6 mm; reverse blank, maker's mark "E.M.UNGER, Lwow"...

Tombak silver plated and patinated, one part construction with profile-stamped reverse, size 43,3 x 43,1 mm; screw on reverse. Fine quality, small sig