AUCTION VI and AUCTION VII

"Parasol" (umbrella) - Badge; silver with patina, maker's mark on reverse "W.MICINSKI/ Rytownik" (=engraver), two small loo...

"Parasol" (umbrella) - Badge; white metal (silver?) with patina, profile-stamped reverse with maker's mark "W.MICINSKI/ Rytownik&...

Bronze silver plated, obverse enamelled, diam.: 37,2 mm; two parts construction; screw on reverse with maker's mark "W.GONTARCZYK, Warszawa...

Bronze gilt, obverse enamelled, centre silver plated, diam.: 36,2 mm; two parts construction; screw on reverse, no maker's mark, numbered "...

Silver with patina, profile-stamped reverse with vertical pin, size 28,1 x 41,1 mm; Polish hallmark, maker's mark "FZ", numbered on re...

Bronze silver plated and gilt, cut out three parts construction; diam.: 35,8 mm; screw on reverse with maker's mark " Torun ", parts p...

Tombak silver plated, two parts construction; diam.: 37,2 mm; screw on reverse without nut. Fine cut out quality! WES. 195<BR><b>Country...

Silver with patina, obverse enamelled, one part cut out construction, diam.: 33,3 mm; screw on reverse, no maker's mark. WES. 196<BR><b...

Thin iron sheet metal, profile-stamped reverse, diam.: 33,8 mm; screw on reverse (probably restored), some corrosion. WES. 196<BR><b>Cou...

Small shield with thin chain, silver, partially enamelled on obverse, crown of eagle gilt, crowned "SP" superimposed; size 23 x 29 mm; rev...

Tombak silver plated, one part construction; size 33,7 x 51 mm, dated "1-X-1919"; tiny screw on reverse (restored?). Similar WES. 1245<...

Tombak silver plated, one part construction, size 34,3 x 51,3 mm, dated "1-I-1920"; screw on reverse, no maker's mark. WES. 1245<BR...

Silver, one part construction, size 34 x 51,5 mm, dated "10-VIII-1920"; "SREBRO"-mark on reverse (= silver), numbered "73&q...

Tombak silver plated with patina, one part construction, size 35 x 52,2 mm, dated "20-I-1921"; screw on reverse with replaced nut. Similar...

Silver, multipart construction, superimposed crown of gold, shoulder strap with enamelled line, size 37,2 x 40,2 mm; maker's mark "J.M.&quo...

Silver, Polish hallmarked and maker's mark "E.M." on obverse, size 37,4 x 40,5 mm; one part construction with profile-stamped reverse....

Silver, multipart construction, shoulder strap with enamelled line, size 37,3 x 40,2 mm; maker's mark "J.M." on obverse; screw on reve...

Silver, Polish hallmarked and maker's mark "J.M." on obverse, two parts construction with profilestamped reverse, size 38,2 x 41,4 mm;...

White metal (silver?), partially patinated, partially gilt, two parts construction, diam.: 39,5 mm; screw on reverse with maker's mark "Wl....

White metal (silver?), partially patinated, partially gilt, two parts construction with superimposed "V", diam.: 38,4 mm; screw on reverse...

Tombak silver plated, one part construction, size 37,5 x 39,8 mm; screw on reverse with maker's mark "J.Michrowski, Warszawa...". WES....

Tombak with little remains of silver, one part construction, size 37,2 x 39,7 mm; screw on reverse, numbered "27". Well worn! WES. 202<...

White metal, one part construction with profile-stamped reverse, diam.: 40,3 mm; screw on reverse with maker's mark "J.Michrowski, Warszawa...

Tombak silver plated and gilt, partially enamelled, multipart cut out construction, diam.: 38 mm; screw on reverse, maker's mark "A.NAGALSK...

Pendant eagle with chain; white metal, two parts construction, inscription "WKK 1919", size 26,3 x 60,3 mm; reverse blank. WES. 205<BR&...

White metal, one part construction, size 18,3 x 49,3 mm; screw on reverse, maker's mark "S.LIPCZYNSKI, Varsovie...", inscription "...

Silver gilt, obverse enamelled, multipart construction, diam.: 43,3 mm; central monogram gold; screw on reverse, maker's mark "WL.BUSZEK, L...

Silver gilt, obverse enamelled, three parts construction, diam.: 41,1 mm, central monogram bronze; screw on reverse, Polish hallmark, maker's ma...

Silver gilt, obverse enamelled, two parts construction, diam.: 40,8 mm; screw on reverse, Polish hallmark, maker's mark "WL.BUSZEK, Lwow&qu...

Silver gilt, obverse enamelled, two parts construction, diam.: 41,8 mm; screw on reverse, Polish hallmarked, maker's mark "W.BUSZEK, We Lwo...

Circular medal, bronze with tiny remains of silver plating, diam.: 44,1 mm; reverse blank, with suspension ring. Some spots of verdigris. See also WES

Bronze gilt, partially silver plated, obverse enamelled, two parts construction, size 42 x 43,2 mm; screw on reverse, maker's mark "STANISL...

White metal, multipart construction of private production, obverse lacquered, size 50,6 x 52,1 mm; reverse with two small screws. Unusual interesting

White metal patinated, obverse partially enamelled, two parts construction, diam.: 40,2 mm; screw on reverse, maker's mark "W.GONTARCZYK, W...

Bronze gilt and silver plated, obverse enamelled, two parts construction, diam.: 42,8 mm; screw on reverse, maker's mark "STANISLAW REISING...

Silver gilt, superimposed part silver plated, obverse enamelled,two parts construction, diam.: 38,8 mm; screw on reverse, maker's mark "W.G...

Tombak silver plated, obverse partially enamelled, two parts construction, size 29,9 x 40,8 mm; screw on reverse, maker's mark "A.NAGALSKI,...

Bronze silver plated, obverse partially enamelled, two parts construction, size 30,2 x 41,3 mm; screw on reverse, maker's mark "A.NAGALSKI,...

Bronze gilt, superimposed part silver plated, two parts construction, obverse partially enamelled, size 30,1 x 41,3 mm; screw on reverse, maker'...

Bronze silver plated, obverse partially enamelled, two parts construction, size 30,1 x 40,9 mm; screw on reverse, maker's mark "A.NAGALSKI,...

Silver gilt, obverse partially enamelled, two parts construction, diam.: 29,7 mm; screw on reverse, Polish hallmarked, maker's mark "A.NAGA...

Bronze gilt, obverse partially enamelled, two parts construction, diam.: 29,9 mm; screw on reverse, maker's mark "A.NAGALSKI, Warszawa"...

Bronze gilt, obverse partially enamelled, two parts construction, diam.: 30,7 mm; screw on reverse. Well worn! WES. 217<BR><b>Country:&l...

Bronze gilt, obverse partially enamelled, two parts construction, diam.: 30,0 mm; screw on reverse, maker's mark "A.NAGALSKI, Warszawa"...

Bronze gilt, obverse partially enamelled, two parts construction, diam.: 30,1 mm; screw on reverse, maker's mark "A.NAGALSKI, Warszawa"...

Bronze gilt, obverse partially enamelled, two parts construction, diam.: 30,1 mm; screw on reverse, maker's mark "A.NAGALSKI, Warszawa"...

Bronze gilt, obverse partially enamelled, two parts construction, diam.: 30,1 mm; screw on reverse, maker's mark "A.NAGALSKI, Warszawa"...

Bronze gilt, obverse partially enamelled, two parts construction, diam.: 30,7 mm; screw on reverse, maker's mark "W.GONTARCZYK, Warszawa......

Bronze gilt, obverse partially enamelled, two parts construction, diam.: 30,3mm; screw on reverse, maker's mark "W.GONTARCZYK, Warszawa...&...

Bronze gilt, obverse partially enamelled, two parts construction, diam.: 29,8 mm; screw on reverse, maker's mark "A.NAGALSKI, Warszawa"...

Silver gilt, obverse partially enamelled, two parts construction, diam.: 29,9 mm; screw on reverse, Polish hallmarked, maker's mark "A.NAGA...

Bronze gilt, obverse partially enamelled, two parts construction, diam.: 29,8 mm; screw on reverse, maker's mark "A.NAGALSKI, Warszawa"...

Bronze gilt, silver plated, obverse partially enamelled, two parts construction, diam.: 30,4 mm; screw on reverse. Well worn! See also WES. 216-227&...

Silver, one part cut out construction, diam.: 31,8 mm; screw on reverse, Polish hallmarked, maker's mark "A.NAGALSKI, Warszawa", numbe...

Tombak silver plated, one part construction with profile-stamped reverse, size 49,1 x 49,2 mm; screw on reverse, maker's mark "J.KNEDLER, W...

Silver, obverse partially enamelled, one part construction, size 31,7 x 41,0 mm; screw on reverse, Polish hallmarked, maker's mark "W.GONTA...

White metal patinated, two parts construction, size 41,5 x 42,3 mm; screw on reverse. WES. 231<BR><b>Country:</b> POLAND<BR>...

White metal silver plated, partially gilt, central "3" in gold, obverse partially enamelled, three parts cut out construction, diam.: 37mm...

Thin tombak sheet, one part construction with profile-stamped reverse, size 41,4 x 49,4 mm; screw on reverse, maker's mark "E.M.UNGER, Lwow...

Steel (steel blue) polished, one part construction, diam.: 39,9 mm; screw on reverse with large iron nut. Without stamps on arms. WES. 234<BR>...

Aluminium, one part construction, diam. 40,4 mm; screw on reverse; with stamped arms ("4" and "4 P.P. 1917/151") and inscription...

Aluminium, one part construction, size 40,0 x 41,6 mm; screw on reverse; with stamped arm ("4 P.P. ...1917...") and inscription "...Z...

Aluminium, one part construction, size 41,4 x 41,3 mm; screw on reverse, maker's mark "W.GONTARCZYK, Warszawa..."; thick and precise q...

Silver, one part cut out construction, diam. 40,8 mm; screw on reverse, Polish hallmarked, maker's mark "W.GONTARCZYK, Warszawa...". E...

Tombak silver plated, two parts construction, size 41,6 x 42,1 mm, no enamels; two small loops of wire on reverse, maker's mark "G.REISING&...

Thin tombak sheet, one part construction with profile-stamped reverse, size 33,6 x 58,9 mm; small new screw on reverse (restored). WES. 239<BR>...

Silver, dark nice patina, one part cut out construction, diam.: 32,0 mm; screw on reverse, Polish hallmarked, maker's mark "A.NAGALSKI, War...

Iron sheet cross with tombak eagle, two parts construction with profile-stamped reverse, size 35,8 x 40,9 mm; screw on reverse. Some corrosion and sma

Bronze silver plated, casted one part construction, size 34,5 x 39,6 mm; screw on reverse, nut is missing. Heavy version in good quality! WES. 241&l...

Silver, one part cut out construction, nice old patina, diam.: 32,7 mm; screw on reverse, Polish hallmarked, maker's mark "A.NAGALSKI, Wars...

Silver gilt, obverse enamelled, two parts construction, diam.: 39,8 mm; screw on reverse, maker's mark "W.GONTARCZYK, Warszawa...". Ex...

Bronze gilt, obverse enamelled, one part construction, diam.: 39,5 mm; screw on reverse, maker's mark "W.GONTARCZYK, Warszawa...". WES...

Bronze silver plated, obverse enamelled, two parts construction, diam.: 30,3 mm; screw on reverse. WES. 244<BR><b>Country:</b> POL...

Tombak silver plated, obverse enamelled, one part construction, diam.: 40,3 mm; screw on reverse, maker's mark "S.LIPCZYNSKI, Varsovie...&q...

White metal (silver?), obverse enamelled, one part construction, diam.: 40,4 mm; screw on reverse, maker's mark "W.GONTARCZYK, Warszawa...&...

Silver gilt, obverse enamelled, three parts construction, diam.: 35,9 mm; screw on reverse, maker's mark "W.GONTARCZYK, Warszawa...". ...

Silver with dark patina, obverse partially enamelled, one part construction, size 39,5 x 39,5 mm; screw on reverse, maker's mark "W.GONTARC...

Silver gilt and enamelled cross with superimposed patinated eagle, two parts construction, diam.: 37,5 mm; screw on reverse, maker's mark "...

Silver slightly gilt and obverse enamelled with superimposed tombak-eagle without crown (Silesian type), two parts construction, diam.: 37,3 mm; screw

White metal (silver?), one part construction, diam.: 34,1 mm; screw on reverse, maker's mark "W.GONTARCZYK, Warszawa...", numbered &qu...

Silver gilt and enamelled cross with superimposed silver patinated eagle, three parts construction, diam.: 41,2 mm; screw on reverse, Polish hallmarke

White metal (silver?) with dark patina, one part cut out construction, profile-stamped reverse, size 41,0 x 40,6 mm; screw on reverse with small nut.

Silver, one part construction, diam.: 41,3 mm; screw on reverse, maker's mark "W.GONTARCZYK, Warszawa...", Polish hallmarked. Impressi...

Silver gilt, obverse enamelled, one part construction, size 39,0 x 39,2 mm; screw on reverse, maker's mark "W.GONTARCZYK, Warszawa..."...

Silver partially gilt and obverse enamelled, two parts construction, size 39,6 x 39,6 mm; screw on reverse, maker's mark "W.GONTARCZYK, War...

Bronze silver plated, obverse enamelled, three parts cut out construction,, diam.: 49,4 mm; screw on reverse, partially profile-stamped, maker's...

Tombak, three parts cut out construction (the arms of Warsaw and Lwow are fixed separately!), profile- stamped reverse, size 33,7 x 43,3 mm; screw on

Tombak, two parts cut out construction, obverse partially enamelled, size 30,8 x 40,1 mm; screw on reverse, maker's mark "J.WALENTA, Krakow...

Tombak gilt, obverse partially enamelled, multipart construction, diam.: 41,9 mm; screw on reverse, maker's mark "W.GONTARCZYK, Warszawa......

Thin tombak sheet silver plated, two parts cut out construction with profile-stamped reverse, size 30,0 x 44,4 mm; screw on reverse, numbered "...

White metal (silver?), three parts cut out construction, partially thin casting, part of old Russian hallmark on obverse ("...84"), size 3...

Silver, partially gilt, obverse partially enamelled, two parts construction, size 43,9 x 43,9 mm; screw on reverse, maker's mark "STANISLAW...

Silver, partially gilt, obverse partially enamelled, two parts construction, size 43,6 x 43,6 mm; screw on reverse, Polish hallmarked, maker's m...

Silver gilt, obverse enamelled, two parts construction, diam.: 39,8 mm; screw on reverse, nut is missing. Small signs of contact! WES. 261<BR>...

Bronze gilt, obverse enamelled, three parts construction, diam.: 42,1 mm; screw on reverse, maker's mark "W.GONTARCZYK, Warszawa...". ...

Silver, obverse partially enamelled, one part construction,, diam.: 41,0 mm; screw on reverse, Polish hallmarked, maker's mark "W.GONTARCZY...

Silver, one part cut out construction, obverse partially enamelled, small remains of gilding, diam.: 37,9 mm, screw on reverse with large nut (no make

Silver, partially gilt and enamelled, one part construction, size 35,2 x 35,8 mm; screw on reverse, Polish hallmarked, maker's mark "Wl.BUS...

Silver, two parts cut out construction, obverse partially enamelled, size 39 x 39 mm; screw on reverse, maker's mark "W.GONTARCZYK, Warszaw...

White metal silver plated, one part cut out construction, size 27 x 39,4 mm; screw on reverse with small nut, numbered "9.", dated "1...