Marway Militaria Inc Auction 138

Issue 1905, to commemorate Nelson victory, marked made from copper from the Victory, loop for suspending from chain. 17.25mm across.

Lot of 2. 1 - dull gold with red enamel points to Star with two Solider wear helmets facing left, and date 1918 - 1968, folder blue, red/white/blue ba

1904 issue, Dark Orange brass metal, flat backed, replaced lugs, GAUNT 53 CONDUIT ST. LONDON maker marked. Excellent stamping and condition. Mazeas MS

GEORGE V. 1910 issue, darkened brass, lug fasteners, excellent stamping. Mazeas MS11.

Pair, dark brass metal, CANADA bottom banner, both SCULLY maker marked, 45mm high. Nice. Mazeas MS12.

C F A, brass title. Single bottom bar, lug fasteners. 19.06mm high. These large titles are attributed to the Boer War. Scarce title.

Aged Gold Wire, 7 flame grenade over CANADA banner. 1 3/4" high by 1" wide. The gold wire is aged and is padded. It is on a red cloth back...

Victorian Crown over Engineers type Coat of Arm over banner, DIEU DROIT/ET MON/UBIQUE ( holes have been drilled in the U and the E of this word, no id

Kings Crown over Maple leaf wreath with circle banner with CANADIAN ENGINEERS and Beaver centre. 1 - dull copper/bronze metal, showing some slight wea

All different patterns of the 1902 issue collars, all Beaver facing to left and voided, lug fasteners. One shiny dark brass, flat design, one dull gol

Canadian Army Service Corps, OFFICER'S Cap badge. Silver Beaver on black painted type material in a silver overlay on bright fire gilt sun burst...

All 1903 issue, different strikings, four are voided and one is solid. One has one replaced lug, rest original lugs. Brass and orange brass metal. Maz

I like to call these the Buried Crown type, MS20.most of the bottom part of the crown covered by the Sun Burst. Lug fasteners. One in orange brass and

All slight different design, all voided Crowns, all voided centers, one has one lug missing, rest have all. Eight have Beaver facing to left and two f

All Beaver centre type, NON voided Crown, Voided centre type, lug fasteners, all Beavers facing to left, different design and sizes. Different metals,

Three are matched pairs, with Beavers facing. 3 - pairs, have solid no voiding around Beavers and solid crowns and are brass metal, lug fasteners. 2 -

All 2 piece, Beaver centre types. One pair, matched beaver facing, dark bronze metal, lug fasteners. One pair matched, dark brass, with traces of gree

This is a Voided Crown, Beaver type, with Beaver facing to the left. It is a type that I haven't seen before because it has a full "BUCKLE&...

All Voided Beaver centre types. 1 - Un Hall marked SILVER metal, Beaver facing to left, voided Crown, lug fasteners, 36.60mm high by 27.05mm wide. Nev

All C A S C, joined at bottom, lug fasteners, approx. 13.53mm high, two dark bronze and three brass metal. No maker marked. Mazeas MS23 type. Lot of 5

. Letters O P, joined in middle, 19.64mm high, lug fasteners. Vendor thinks could be OBSERVATION POST and I have no idea if he is right or not. I am n

2 - white metal Maple Leaf with voided centre cross design with red cloth backing. Flat Ellis type lugs. 30.37mm high by 27.79mm wide. I have seen the

Lot of 2. Both Beaver on top of shield with bottom ORDNANCE banners. Lug fasteners. 1 - Brass, Beaver facing to left, shows wear to high points, 41.66

Heavy bronze metal, Beavers facing over shield, lug fasteners, smooth back, Guns Facing, excellent. Mazeas MS 28 type.

. 2 - brass metal, slight different patterns, both Beavers facing to left, Guns facing to left on both, one has dark green staining on it, 35.94mm hig

Brass button, 16.58mm across, with raised outer rim, Victorian Crown over Beaver with ribbon banner with QUEBEC GARRISON CLUB on it. Wear to the detai

Brass Cap badge, lug fasteners, SCULLY MONTREAL maker marked. 2 - Collar badges, same design as cap, brass metal two sizes, 36.42mm wide and other 25.

Bright silver plated, fine screw post fasteners, smooth back. Nice stamping. Mazeas CD9.

White metal, 35th HALIFAX CADET, white metal, lug fasteners. MADE IN ENGLAND (Gaunts) disk on back, shows some light dark staining should clean up eas

These are the 1st issue type, with "NO" Beaver near the Tree at top. 1909-1911 type. These where worn both a Cap and Collar badges. The ba...

1 - Lord Strathcona's Horse, Royal Canadians, cap/collar badge. Mazeas MC8 type, with "NO" Beaver on it and the words, LORD STRATHCONA...

All word STRATHCONA'S, curved down, 2 bar, 14.64mm high, lug fasteners. There are two dull gold coated metal and one light gold anodized plastic...

. I am not sure when this one was issue or worn. It is dull gold coated, showing the Gate and the banner has words, FORT GARRY HORSE, on it. Lug faste

Two, same design Gate over FACTA NON VERBA BANNER, slight different designs, one dull gold coated brass metal, lug fasteners and other different shade

Matched pair, Wolfs facing, lug fasteners, both SCULLY maker marked. The right facing one dull brass metal with some slight age darkening and the othe

1899 issue, dark brass metal, lug fastener, LAMONTAGNE maker marked, excellent. I am calling this the 1899 issue due to the area of the base of the Cr

All non voided under the Crown and above banner types. 5 - dark brass, one pair with facing Lions and three with Lion facing to left, all lug fastener

Collar badge size, Lion facing to left, bright gold plated, pin back fasteners, marked on back, HEMSLEY STERLING. Nice. Mazeas C13.

Single number 6's. 1 - 19.13mm high, lug fasteners, SCULLY maker marked. 1 - 21.89mm high, one lug removed. Both age darkened brass metal. Lot o...

Dull copper bronze metal, lug fasteners. This is the early issue with V above bottom banner. Nice stampings. Mazeas MC14. 1903-1922 issue.

. Dull copper/bronze metal, lug fasteners, Horses head facing to right, which is attached separate to the circle banner. . This issue the Cap and coll

This issue the same badge used for Cap and Collars, with the left facing Pegasus being used for the cap badge. The cap badge is dull copper/bronze met

. 1909 issue, dull gold plated metal, with white metal Bull Dog overlay. J.R. GAUNT/MONTREAL disk on the back. Beautiful well made badge as only Gaunt

2 - Matched pair collar, bull dogs facing, white metal with attached brass bottom banner, lug fasteners. J.R. GAUNT/MONTREAL maker marked. 1 - Number

Pair, brass M T D, joined at top, 14.44mm high with D being 10.69mm high. Single screw post fastener with nut. Some staining on one of the D's. ...

1910 issue, dark copper/bronze metal, lug fasteners, W. SCULLY MONTREAL maker marked. Nice stamping. Mazeas MC49.

1910 issue, matched pair with animals facing. Left facing one dull brass, stamped and right facing one dull gold brass, W. SCULLY MONTREAL maker marke

Brass metal with 31/B.C.H., voided centre. Red cloth backing to centre design. Lug fasteners, J.R. GAUNT/MONTREAL disk on the back. Piece of thin thin

Dull gold played brass, red cloth backing to 31/B.C.H., lug fasteners, J.r. GAUNT/MONTREAL disks on the back. One slightly darker than other with smal

This is the issue that the same badge worn as both Cap and Collar. This one dull copper/brass. It has three holes drilled to hold overlay which is mis

Both, 25mm size, with design of the 31st BCH on them. Both J.R. GAUNT & SONS BIRMINGHAM maker marked. Lot of 2.

Brass number 4, two lug fasteners, 20mm high.Mazeas MC13. 1910 issue.

Pair of brass number 8s, 19m high, one has two small folding fasteners (I have seen these type fasteners used on Police number and this could well be

White metal, pin fastener, original to badge. Excellent stamping. Mazeas MC21.

Two Matched pairs, Buffalo's facing, white metal, lug fasteners, SCULLY maker marked. One lug removed, but included. Mazeas MC21.

Dull orange brass Horse facing to left. Lug fasteners. Mazeas MC29. 1908 issue.

Pair, dull gold coated metal, lug fasteners, Mazeas MM266. 1909 issue

Brass metal, lug fasteners, nice stamping. Mazeas MM227. 1906 issue.

White metal, one folding lug remaining and other removed, nice stamping. Mazeas MM191. 1907 issue.

63 in Horn type. One dark brass metal mouth of horn to right, someone has attached two thumb tacks for fasteners and one dark brass metal, mouth of ho

This is one of the Regiments that wore the same sized badge for both Cap and Collars. The Lions face and the left facing was worn as the cap as well a

Matched pair, Boers Heads facing, dull gold coated brass metal, lug fasteners, large size, 44.20mm wide. Nice. Mazeas MM106. 1904-1921 issue.

. Two different strikings On dull copper bronze metal, Horse facing to left, for some reason the side to side lugs have been cut off, studs remaining,

. Copper bronze base metal with traces of brass coating remaining. Lug fasteners. Copper bronze showing on high spots due to wear. Nice stamping. Babi

Copper bronze base metal with traces of brass coating remaining. Lug fasteners. Babins E93

. Pair, brass metal, 13.12mm high, lug fasteners, both marked P.W. ELLIS CO LTD 1915 on one and no LTD on the other, on the back.

Brass metal, lug fasteners removed years ago. Beaver facing to right. Babins E25-1.

. 1 - Cap badge, dull/brass metal, maker marked TIPTAFT (Which makes me think CEF era), smooth back, lug fasteners. Shows some darkening. 1 - Collar b

2 - One, C A M C, joined at bottom, 14.11mm high x 48.11mm wide, lug fastener and one, C.A.M.C, joined at bottom. lug fasteners, 13.34mm high, by 58.8

Age darkened Brass Metal, Beaver facing to right, lug fasteners, TIPTAFT maker marked. This badge worn from 1910 to early 1920's. Babins E11-2A....

All Beaver over Maple leaf wreath with CVC letters, voided, intertwined in centre. All lug fasteners. Two different shades of brass, Beaver facing to

Both Beaver over Maple leaf wreath with CVC centre letters, these are un voided, type. Both Beaver facing to left. Lug fasteners. Dull orange brass. B

Beaver, facing left, over Maple Leaf wreath, with silver metal overlay on the CVC letters, lug fasteners. SCULLY MONTREAL maker marked. 32.88mm high b

Bright gold plated, GAUNT MONTREAL maker marked, lug fasteners, excellent condition, Beaver facing to right. Babins E11-2A.

Maple leaf with Kings Crown over Leaf wreath with CVC centre, brass metal darkened with brass showing through on high points. Lug fasteners. GAUNT Dis

All Maple Leaf type, Babins E11-2, lug fasteners, two with Gaunt maker disk on back and one without. All brass metal coated dark with brass showing du

Error type, D.S., rather than O.S. Large dark copper bronze metal Maple leaf with lug fasteners, excellent stamping. Babins E39-7.

Lot of 5. Babins E39-7. All Error type, DS rather than OS. All same design, two dark copper bronze, singles, dull gold gilt, brass, dark brass metals.

Darkened brass metal, O.S. type, lug fasteners, smooth back. Nice stamping. Babins E39-8.

All O.S. type. Same pattern, two very dark brass, pair and singles, brass metal, pin back fastener which has replaced lugs and dull gold coated, maker

Dull copper bronze metal, lug fasteners, maker marked, CARON BROS. MONTREAL 1916. Shows some wear to high points. 47.48mm high by 40.98mm wide. Babins

Brass metal, C O C, two lugs which have been flattened but still present. Maker named CARON BROS 1916 on the back. Hard to find these dated pieces.

Dark copper bronze metal, lug fasteners, excellent stamping and condition. Babins E39-5

Two matched pairs, Beavers facing. 1 - pair, dull orange brass, lug fasteners, nice. 1 - pair, right facing one brass metal and the left facing one du

. Copper bronze metal, flattened lug fasteners, nice stamping.Babins E39-5A

Two collars, beavers facing left on both, chocolate brown coating. one has single flattened lug, other removed and other one has two regular lugs, sho

Dull coated brass, lug removed, small area of green staining on left feather tip. Maker marked on back, P.W. ELLIS & CO/1918 (I think it is an 8...

Lot of 3. 1 - 24.28mm size, Copper/bronze metal, W.SCULLY maker marked. 2 - 16.79mm size, gold coated, W. SCULLY maker marked. Nice.

Brass metal, with black coating, with some areas of brass showing due to wear. This is the type with the Kings Crown over a square base, the base of t

Another square type with Crown above, the base of this is wider, 9.29mm wide, and the square, 29.13mm per side. This has clutch pin fasteners, which a

This is a different one. It is the Crown square type design, with a large Kings Crown, 8.05mm wide by 7.88mm high, mounted on a smaller square, 18.63m

The Crown over the square type, with the side of the square being 16.86mm per side and the crown being 5.04mm wide by 3.96mm high. It has the clutch p

Maple leaf shape, white metal, lug fasteners, shows some wear to high points of the crown. Looks like from the back that a centre lug has been polishe

This is the 1 3/8" x 1 1/2" size, brass metal, one lug replaced and other missing. O. B. ALLAN maker marked. Nice stamping. Babins E34-8.

C32 - No Lot

C M P, 13.50mm high letters, joined at bottom , brass metal, on back CARON BROS 1 rest covered with solder but would say WW1 issue.

All Kings Crown over CANADA banner, Men's Issue. 1 - Dull copper bronze, RODEN BROS TORONTO, lug fasteners. 1 - bright copper, flat type lugs, R...

Brass metal Maple Leaf with high raised detailed Kings Crown over CANADA banner, lug fastener, 1 3/4" high by 1 5/8" wide. Described and p...

14.67mm high, lug fasteners, dark copper bronze, maker marked on back BIRKS 1917. Quite a Scarce title. RCD.

Dull copper brass Maple leaf with white metal overlay, lug fasteners, W J. DINGLEY B'HAM maker mark, Very nicely made badge. Babins E6.