AUCTION VI and AUCTION VII

Thin copper sheet silver plated, one part construction with profile-stamped reverse, size 37,1 x 44,5 mm; screw on reverse, maker's mark "S...

Tombak sheet silver plated and patinated, one part construction with profile-stamped reverse, size 39,1 x 39,1 mm; screw on reverse, maker's mar...

Tombak, obverse toned, one part construction, size 39,8 x 40,0 mm; screw on reverse, maker's mark "E.M.UNGER, Lwow...", numbered "...

Silver, one part construction, size 37,9 x 38,0 mm; screw on reverse, old Austrian hallmarks (lion's head, F4 = Lemberg 750), maker's mark &...

Copper sheet with white metal basis, two parts construction, size 38,6 x 39,0 mm; screw on reverse. Obverse with signs of silver plating. WES. 890 var

Large plaque, tombak silver plated with white metal basis, two parts construction, size 79,1 x 158 mm, average thickness 2 mm; on top inscription: &...

Bronze silver plated with dark patina, superimposed centre gilt, two parts construction, size 36,3 x 41,3 mm; reverse blank, with loop and suspension

Tombak, superimposed silver plated eagle, two parts construction, size 37,8 x 39,5 mm; reverse blank, numbered "79" (or "19"), w...

Tombak gilt, obverse red enamelled, superimposed silver eagle, two parts construction, size 40,4 x 41,5 mm; reverse blank, numbered "236";...

Bronze gilt or silver plated, obverse partially enamelled, three parts cut out construction, size 37,4 x 37,0 mm; screw on reverse, maker's mark...

Tombak gilt, obverse enamelled, superimposed eagle and building silver, three parts construction, size 29,3 x 42,3 mm; horizontal pin on reverse, make

Bronze silver plated, obverse partially enamelled, two parts construction, size 38,8 x 39,2 mm; screw on reverse, numbered "252". Small si...

Bronze silver plated and patinated, obverse partially enamelled, two parts construction, size 48,9 x 49,0 mm; screw on reverse, maker's mark &qu...

Silver alloy, one part construction, inscription on obverse "WILNO / WIELKANOC" (= VILNIUS / Easter), size 30,1 x 30,3 mm; screw on revers...

Cast brass silver plated and patinated, one part construction, size 43,7 x 53,2 mm; reverse blank, maker's mark "E.M.UNGER, Lwow", num...

Bronze silver plated, centre enamelled and partially gilt, three parts construction, diam.: 54,5 mm; screw on reverse, no marks. Good quality, artific

Silver patinated, cross obverse dark blue enamelled, superimposed silver centre, two parts construction, size 41,0 x 41,0 mm; screw on reverse, make...

Thin copper sheet, one part construction with profile-stamped reverse, size 34,9 x 34,4 mm (not exact rectangular); screw on reverse. Simple cheap qua

Thin tombak sheet silver plated, one part construction with profile-stamped reverse, size 34,1 x 34,4 mm; screw on reverse. Simple quality with signif

Cast zinc with superimposed silver eagle, two parts construction, size 35,0 x 34,2 mm (not exact rectangular); screw on reverse. Simple heavy quality!

White metal silver plated, partially patinated, centre partially enamelled, three parts construction, size 48,4 x 48,5 mm; screw on reverse, maker&#...

Tombak silver plated and patinated, cross obverse red enamelled, two parts construction with profilestamped reverse, size 46,8 x 46,9 mm; screw on rev

Silver partially patinated, cross obverse black enamelled, three parts construction with partially enamelled centre, size 48,8 x 48,6 mm; screw on rev

Silver patinated, superimposed shield red enamelled and crowned with gold crown, multipart cut out construction, size 39,8 x 55,4 mm; screw on reverse

Bronze silver plated, one part cut out construction with profile-stamped reverse, size 39,4 x 55,3 mm; screw on reverse, iron nut, numbered "11...

Tombak, partially blued, partially gilt (shield, wreath), one part cut out construction with profilestamped reverse, size 39,6 x 55,2 mm; screw on rev

Silver, partially gilt or with dark patina and parts enamelled, gold crown set with red and green stones and pearls, multipart cut out construction, s

Tombak patinated, partially gilt or enamelled, multipart cut out construction, size 44,4 x 58,0 mm; screw on reverse, maker's mark "...WL.W...

Tombak, one part cut out construction with profile-stamped reverse, size 44,6 x 57,6 mm; screw on reverse, maker's mark "S.LIPCZYNSKI, Vars...

Tombak, partially patinated, small parts gilt, centre shield enamelled, five parts cut out construction with profile-stamped reverse, size 44,0 x 57,7

Silver patinated, obverse enamelled, partially enamelled superimposed eagle, two parts construction, size 33,8 x 46,7 mm; screw on reverse, maker...

Tombak silver plated and patinated, one part construction, size 34,0 x 53,7 mm; screw on reverse, inscription on reverse "ZA BOHATERSKA".....

Tombak, one part cut out construction, size 43,3 x 43,9 mm; screw on reverse, zinc nut, numbered "14". Some signs of wearing! WES. 908<...

Silver gilt, obverse mostly enamelled, superimposed centre, two parts construction, size 40,0 x 46,9 mm; reverse blank, maker's mark "K i M...

Silver gilt, obverse enamelled, superimposed centre, two parts construction, size 40,0 x 46,1 mm; reverse blank, maker's mark "K i M",...

Bronze gilt, obverse enamelled, superimposed centre, three parts construction, size 40,2 x 45,9 mm; reverse blank, with loop, suspension ring and whit

Bronze gilt, obverse enamelled, with other type swords (sabres), three parts construction, size 39,9 x 39,6 mm; screw on reverse, maker's mark &...

Bronze gilt, obverse enamelled, with other type swords (sabres), three parts construction, size 40,2 x 44,7 mm; reverse blank, with loop, suspension r

Bronze gilt, not enamelled, small enamelled superimposed centre, three parts construction, size 40,1 x 45,7 mm; reverse blank, with loop, suspension r

Thin tombak sheet toned, one part construction with profile-stamped reverse, diam.: 43,8 mm; screw on reverse, mark "SKNURZYL" (maker?), n...

Tombak gilt, superimposed centre silver plated, two parts construction, size 42,3 x 41,7 mm; screw on reverse. Medium quality with signs of wearing! W

Tombak gilt and obverse enamelled, superimposed silver plated centre, two parts construction, size 41,4 x 41,1 mm; screw on reverse, maker's mar...

Tombak toned, centre shield enamelled, three parts cut out construction with profile-stamped reverse, size 44,1 x 39,9 mm; screw on reverse, maker&#...

Bronze silver plated, obverse cross black enamelled, superimposed silver plated eagle with enamelled shield (Lithuanian Cross), three parts constructi

Tombak blued, with tombak centre "WILNO" (partially lacquered), two parts construction with profile-stamped reverse, size 40,1 x 39,6 mm; ...

Tombak blued, superimposed silver plated eagle, two parts construction with profile-stamped reverse, size 39,8 x 40,3 mm; screw on reverse, maker...

Tombak sheet, superimposed golden coloured eagle, two parts construction with profile-stamped reverse, size 37,0 x 38,0 mm; screw on reverse, nut is m

Tombak sheet blued, superimposed silver plated eagle with Lithuanian Knight (partially lacquered), two parts construction with profile-stamped reverse

Silver, cross obverse black enamelled, no inscription on arms, superimposed large eagle with enamelled shield (Lith. Cross), three parts construction,

Thin copper sheet, superimposed silver plated large eagle, two parts construction, size 43,6 x 42,7 mm; screw on reverse, maker's mark "S.L...

Copper toned, superimposed silver plated eagle, two parts construction, size 45,7 x 43,0 mm; screw on reverse, maker's mark "KAPITULA ODZNA...

Cast brass silver plated, one part construction, crossed swords on shield, size 35,4 x 39,1 mm; reverse stamped "A.O. / 1920", with loop a...

Brass silver plated, one part construction, crossed rifles on shield, size 36,7 x 38,8 mm; reverse blank, with loop and new red ribbon. Fine stamped q

Cast brass silver plated, with dark patina, one part construction, crossed cannons on shield, size 38,1 x 41,3 mm; reverse blank, with loop and orange

Cast brass silver plated, one part construction, airscrew on shield, size 35,6 x 38,6 mm; inscription on reverse: "A.O. 1920" and airscrew...

Small Virtuti Militari-type cross, bronze silver plated and patinated, multipart construction with tiny enamelled superimposed parts on obverse, parti

Silver patinated, centre enamelled, one part construction with profile-stamped reverse, size 30,3 x 36,3 mm; screw on reverse, maker's mark &quo...

Tombak sheet, one part construction with profile-stamped reverse, size 29,9 x 35,3 mm; screw on reverse, maker's mark "K.CORZUCHOWSKI, Wiln...

Tombak sheet partially toned, one part construction, size 30,7 x 30,7 mm; screw on reverse, nut is missing. Original pin was removed and screw bolt wa

Tombak sheet silver plated and partially patinated, one part construction with profile-stamped reverse, diam.: 29,1 mm; long vertical pin on reverse.

Cast brass silver plated and patinated, superimposed small silver plated copper eagle, two parts cut out construction, size 38,5 x 45,0 mm; reverse bl

Cast white metal silver plated and patinated, one part cut out construction, size 39,3 x 39,7 mm; screw on reverse, maker's mark "WL.BUSZEK...

Thin tombak sheet, partially patinated, one part cut out construction with profile-stamped reverse, size 39,9 x 40,1 mm; screw on reverse, small nut.

Tombak silver plated and patinated, one part construction, size 40,0 x 40,6 mm; horizontal pin on reverse. Simple design and quality with some signs o

Bronze gilt, obverse polished, superimposed star enamelled, two parts construction with profilestamped reverse of star corpus, diam.: 64,5 mm; vertica

Cast bronze, one part construction, size 40,7 x 58,1 mm; screw on reverse, nut is missing, maker's mark "J.WALENTA, Krakow", numbered ...

Outsize badge, cast bronze with dark patina, one part construction, size 61 x 92 mm; reverse with three points of soldered rivets (the rivets are remo

Bronze silver plated and gilt, obverse partially enamelled, sixparts construction, size 37,8 x 42,0 mm; reverse blank with inscription: "WALECZ...

Silver, obverse partially enamelled and centre gilt, two parts construction, size 38,2 x 38,5 mm; screw on reverse, maker's mark "J.KNEDLER...

Silver, obverse partially enamelled and centre gilt, two parts construction, size 37,7 x 38,1 mm; screw on reverse, maker's mark "J.KNEDLER...

Tombak silver plated and patinated, one part construction, diam.: 33,2 mm; screw on reverse, maker's mark "J.KNEDLER, Warszawa", numbe...

Bronze partially silver plated, obverse enamelled, three parts construction, size 28,7 x 32,6 mm; reverse blank, with loop, ring and blue/white ribbon

Bronze silver plated, one part construction, size 29,8 x 43,7 mm; reverse inscription: "I-SZE / ZAWODY SPORTOWE / KOMENDY GLOWNEJ", with s...

Bronze gilt, one part construction, size 29,9 x 43,6 mm; reverse inscription: "I-SZE / ZAWODY SPORTOWE / KOMENDY GLOWNEJ / SZTAFETA 270km 18.-I...

Bronze silver plated and patinated, one part construction, size 29,6 x 43,9 mm; reverse inscription: "II.GI / MARSZ POWSTANCOW / NA ODRE / 14/1...

Bronze gilt, one part construction, size 29,9 x 44,8 mm; reverse inscription: "IV-TY / MARSZ POWSTANCOW / NA ODRE / 15/16 VIII / I M."; wi...

Tombak, partially silver plated, obverse mostly enamelled, three parts inlaid, four parts cut out construction, size 31,1 x 49,5 mm; screw on reverse,

Thin tombak sheet, slightly silver plated, one part construction with profile-stamped reverse, size 36,8 x 37,0 mm; screw on reverse. Signs of wearing

Copper silver plated, one part construction, size 34,2 x 43,6 mm; screw on reverse, maker's mark "FABR. WYR....GOLDBERG i KUCYNSKI". S...

White metal-silver alloy, one part construction, size 43,9 x 43,7 mm; screw on reverse, hallmarked "800" (incorrect!). Fine quality with p...

Copper silver plated and patinated, one part solid construction, size 36,6 x 40,9 mm; reverse blank, with small loop and ribbon (light blue). Small si

Thin tombak sheet, one part construction with profile-stamped reverse, size 36,4 x 36,4 mm; horizontal safety pin on reverse. Small signs of wearing!

Bronze silver plated, obverse enamelled, two parts construction, size 38 x 37 mm; screw on reverse. Good design but simple quality, signs of wearing!

Bronze, cross obverse enamelled, superimposed silver sword with gold-inlays and small enamel centre, five parts construction, size 17,9 x 48,4 mm; scr

Tombak, partially gilt and enamelled, one part cut out construction, size 20,3 x 53,7 mm; screw on reverse, maker's mark "J.KNEDLER, Warsza...

Silver patinated, obverse partially enamelled, one part cut out construction, size 21,1 x 54,6 mm; screw on reverse, maker's mark "SG"...

Bronze gilt, obverse partially enamelled, two parts cut out construction, size 34,1 x 65,5 mm; reverse with thin superimposed cross with inscription:

Cast bronze silver plated, obverse mostly enamelled, small superimposed enamelled shield, two parts cut out construction, size 29,2 x 57,9 mm; vertica

Medal, tombak, centre cross silver plated and patinated, two parts cut out construction with profilestamped reverse, diam.: 45,0 mm; reverse blank, wi

Thin tombak sheet silver plated, one part construction with profile-stamped reverse, diam.: 36,0 mm; screw on reverse, nut is missing. WES. 954 var....

Thin tombak sheet toned, one part construction with profile-stamped reverse, diam.: 36,2 mm; horizontal pin on reverse. WES. 954 var.<BR><b...

White metal silver plated, one part construction, diam.: 32,6 mm; screw on reverse. Some signs of wearing! WES. 955<BR><b>Country:</b...

Thin brass sheet, remains of silver plating, two parts construction with relief-stamped reverse size 47,8 x 53,5 mm; inscription on reverse: "P...

Bronze gilt, obverse enamelled, superimposed eagle in centre, two parts construction, size 44,4 x 47,3 mm; reverse blank, with loop and new red ribbon

Bronze silver plated, obverse centre enamelled, one part construction, size 41,6 x 44,4 mm; reverse blank with inscription: "ZA WALECZNOSC"...

Bronze silver plated, partially patinated, small parts gilt, one part cut out construction, size 35,0 x 35,3 mm; screw on reverse, maker's mark ...

Bronze gilt, partially silver plated and patinated, obverse enamelled, two parts cut out construction, diam.: 50,6 mm; screw on reverse, maker's...

Bronze silver plated, partially with dark patina, cross obverse enamelled, four parts construction, size 40,4 x 41,8 mm; screw on reverse. Fine design

Medal badge, silver, small remains of gilding, obverse and reverse small parts enamelled, superimposed "LP" on obverse, two parts construc...

Small hanger badge, silver patinated, small parts enamelled, superimposed "LP" gilt, three parts cut out construction, size 28,2 x 35,6 mm...