AUCTION VI and AUCTION VII

Cloth insignia, black background, white shield with gilt embroidery, size ca. 41,5 x 52 mm; reverse with rest of paper. WES. 783 var.<BR><b...

Sleeve-badge, synthetic black basis with superimposed white metal shield and tombak cross, three parts construction, size 39,7 x 49,8 mm; four holes t

Cloth insignia, black background, white shield with silver plated and gilt thread embroidery, size ca. 43 x 48 mm. Near mint unworn badge in cheap qua

Cloath insignia, woven green fir tree on white and red background, size ca. 42 x 49 mm. Some signs of wearing! WES. 784 var.<BR><b>Count...

Cloth insignia, woven brown buffalo on khaki background and brown border, size ca. 44,7 x 49,6 mm. Small signs of wearing! WES. 785 var.<BR>&l...

Cloth insignia, white felt background with embroidered orange brown griffin and green-blue border, size ca. 41 x 50 mm. Small signs of wearing, good q

Cloth insignia, orange felt background, black and white embroidered dragon, size ca. 54 x 34 mm. Significant signs of wearing! WES. 790 var.<BR&g...

Cloth insignia, woven picture on khaki felt, size ca. 53 x 78 mm. New reproduction! WES. 778 and WES. 794<BR><b>Country:</b> POLAN...

Cloth insignia, background of blue felt with embroidered coat of arms, size ca. 49 x 58 mm. Small signs of contact! WES. 793/797 ?<BR><b>...

Cloth insignia, brown felt background with red shield and three silverthread embroidered crosses, size ca. 45 x 51 mm; paper on reverse with notice ...

Large cloth insignia, black felt background with silver and gold embroideries, size ca. 82 x 71 mm; paper on reverse. Very impressive design, fine qua

White metal silver plated and patinated, one part cut out construction with profile-stamped reverse, diam.: 31,9 mm; screw on reverse with small nut.

White metal silver plated, obverse partially patinated, one part cut out construction, diam.: 30,9 mm; screw on reverse with small nut. WES. 803 var...

White metal silver plated and patinated, deep relief on obverse, one part cut out construction, diam.: 31,4 mm; screw on reverse. Fine attractive qual

Tombak silver plated and patinated, one part solid construction with profile-stamped reverse, diam.: 31,4 mm; screw on reverse. WES. 803 var.<BR&...

White metal silver plated and patinated, obverse partially dark blue and red (centre) enamelled,one part construction, size 32,3 x 45,0 mm; vertical p

Tombak silver plated and patinated, one part construction, size 33,3 x 45,8 mm; vertical pin on reverse, numbered "3275". Some signs of we...

Tombak silver plated and patinated, one part construction with profile-stamped reverse, size 32,3 x 45,1 mm; screw on reverse, maker's mark (on ...

Tombak silver plated and patinated, bronze wreath with date "15-II-1918", two parts construction, size 32,5 x 50,5 mm; vertical pin on rev...

Tombak silver plated or gilt, two parts cut out construction, diam.: 40,0 mm; screw on reverse, numbered "2". Very fine design and quality...

Tombak, cross with white enamel-lacquer, centre red enamelled, four parts cut out construction, diam.: 38,9 mm; screw on reverse, maker's mark &...

Tombak silver plated and patinated, two parts cut out construction, size 52,1 x 52,4 mm; screw on reverse, nut is missing. Large version without ename

Silver alloy with dark patina, three parts cut out construction with profile-stamped reverse, red enamelled centre, size 41,2 x 41,3 mm; screw on reve

Copper sheet, obverse engraved, one part construction, size 50,2 x 51,0 mm; screw on reverse, small new nut. Plain handmade quality with small differe

White metal silver plated and patinated, two parts cut out construction, size 39,5 x 39,1 mm; screw on reverse, maker's mark "B.GRABSKI, Lo...

Silver, one part construction, size 32,6 x 32,7 mm; screw on reverse, maker's mark "J.MICHROWSKI, Warszawa...", Polish hallmarked, num...

White metal sheet, one part cut out construction, diam.: 28,5 mm; horizontal pin on reverse (safety pin), maker's mark "E.M.UNGER, Lwow&quo...

White metal sheet, one part cut out construction, diam.: 28,5 mm; long vertical pin on reverse, red silk background, grey cover on reverse. Small sign

White metal sheet, obverse patinated, one part solid construction with profile-stamped reverse, diam.: 28,6 mm; long vertical pin on reverse. WES. 815

Bronze gilt, obverse partially enamelled, four eagles patinated with gilt crowns, two parts cut out construction, size 48,1 x 47,9 mm; screw on revers

White metal silver plated and patinated, centre with red enamel, three parts construction, size 45,6 x 45,2 mm; screw on reverse. Very fine design and

Bronze gilt, partially silver plated, cross obverse enamelled, two parts cut out construction with profile-stamped reverse, size 48,0 x 48,5 mm; screw

Silver partially slightly gilt, cross obverse enamelled, six parts construction, size 60,0 x 59,5 mm; screw on reverse with supplementary disc, make...

Bronze, partially gilt or silver plated, cross obverse enamelled, complete badge is superimposed on an eight point starburst corpus (tombak silver pla

Bronze gilt, cross obverse partially enamelled, two parts construction, badge is like a breast cross decoration, size 39,9 x 40,4 mm; reverse blank, w

Bronze partially gilt or silver plated, cross obverse enamelled, two parts cut out construction, size 47,2 x 47,2 mm; screw on reverse, maker's ...

Silver partially gilt, partially patinated, cross obverse red enamelled, two parts cut out construction, size 37,1 x 36,5 mm; screw on reverse, make...

White metal sheet with dark patina, one part construction with profile-stamped reverse, size 32,6 x 48,6 mm; screw on reverse with small nut, numbered

Tombak silver plated and partially patinated, one part construction with profile-stamped reverse, size 39,1 x 39,1 mm; screw on reverse, maker's...

Tombak silver plated and patinated, one part construction, diam.: 45,0 mm; screw on reverse. Fine quality! WES. 828<BR><b>Country:</b...

Small Latin cross, silver, obverse black enamelled, with superimposed Polish eagle "1K", two parts construction, size 23,3 x 41,3 mm; scre...

Small Latin cross, tombak with signs of silver plating, with superimposed Polish eagle "1K", two parts construction, size 24,5 x 43,9 mm; ...

Small Latin cross, white metal, superimposed Polish eagle "1K", two parts construction, size 19,9 x 38,1 mm; screw on reverse, numbered &q...

Silver gilt, obverse mostly enamelled, two parts cut out construction, size 41,4 x 41,0 mm; screw on reverse, maker's mark "B.SZULECKI, War...

Silver gilt, obverse mostly enamelled, two parts cut out construction, size 39,7 x 39,4 mm; screw on reverse, maker's mark "B.SZULECKI, War...

Silver, basis green enamelled, superimposed eagle with small gold layers, two parts cut out construction, size 37,1 x 52,8 mm; screw on reverse, numbe

Silver, basis green and red enamelled, superimposed parts bronze and silver, four parts construction, size 39,9 x 54,3 mm; screw on reverse, maker&#...

Silver, basis red enamelled, superimposed silver eagle, two parts cut out construction, size 31,6 x 54,1 mm; screw on reverse. Fine quality and condit

White metal silver plated, two parts cut out construction, size 37,0 x 52,6 mm; screw on reverse, numbered "1347". Signs of wearing! WES. ...

Bronze silver plated, partially gilt and enamelled, two parts construction, size 32,4 x 43,8 mm; with fixed suspension, reverse blank, with green ribb

Silver patinated, obverse partially enamelled, two parts construction, size 30,7 x 41,5 mm; screw on reverse, maker's mark "ZJEDN. GRAWERZY...

Bronze silver plated and patinated, partially gilt and enamelled, two parts construction, size 31,4 x 41,5 mm; plain reverse, one hole on upper point

Tombak, obverse enamelled, two parts construction, diam.: 28,0 mm; horizontal pin on reverse, soldered label "POLSKI / SAMARYTANIN / 1914"...

Silver patinated, obverse partially enamelled, four parts construction, size 31,1 x 40,9 mm; screw on reverse, maker's mark "SZW", Pol...

Bronze, signs of gilding, obverse partially enamelled, two parts cut out construction, size 45,1 x 49,1 mm; reverse blank, with suspension ring and re

Silver with dark patina, obverse partially enamelled, one part construction, size 43,4 x 53,9 mm; screw on reverse, maker's mark "J.KNEDLER...

Bronze, one part medal, diam.: 39,9 mm; with suspension ring and ribbon (blue with six black stripes). Some signs of wearing! WES. 841<BR><...

White metal silver plated, superimposed shield gilt, two parts construction, size 31,8 x 58,7 mm; screw on reverse, maker's mark "P.BOBKOWI...

Tombak sheet silver plated and patinated, one part construction with profile-stamped reverse, size 31,1 x 49,2 mm; screw on reverse, maker's mar...

Tombak, one part construction hanger with suspension loop, size 28,5 x 60,0 mm; numbered on reverse "4480", inscription: "RARANCZA / ...

Silver, obverse patinated, partially gilt, centre and crown enamelled, one part construction, size 28,5 x 59,2 mm; with suspension loop (enamelled), r

Aluminium engraved, central tombak shield with superimposed alu-legion cross, six parts construction, size 31,7 x 59,1 mm; with suspension ring, rever

Silver patinated, one part cut out construction, size 31,6 x 50,0 mm; screw on reverse, screw bolt was repaired, nut is missing. Handmade private badg

Bronze-alloy silver plated, with dark patina, one part construction with profile-formed reverse, size 50,8 x 51,6 mm; screw on reverse. Large attracti

Thin tombak sheet, one part construction with profile-stamped reverse, diam.: 39,7 mm; horizontal safety pin on reverse. WES. 847<BR><b>...

Tombak, obverse partially silver plated or blue enamelled, two parts construction, size 37,5 x 36,3 mm; screw on reverse, numbered "5". Fi...

Tombak silver plated, with dark patina, partially silver polished, one part construction, size 47,1 x 32,5 mm; vertical pin on reverse. Superb design

Tombak, one part construction with profile-stamped reverse, small signs of silver plating, size 42,3 x 42,5 mm; screw on reverse. Some signs of wearin

Thin tombak sheet toned, one part construction, diam.: 44,6 mm; screw on reverse. Fine detailed stamped badge! WES. 852<BR><b>Country:&l...

Tombak, one part construction with profile-stamped reverse, size 40,8 x 41,0 mm; screw on reverse. Some signs of wearing! WES. 853<BR><b>...

Tombak silver plated, two parts construction, size 34,2 x 35,9 mm; screw on reverse, nut is not fitting. Silver plating nearly totally polished off! S

Bronze gilt, obverse partially black enamelled, with red enamelled centre, two parts cut out construction, size 36,4 x 36,5 mm; screw on reverse, make

Bronze silver plated, obverse partially enamelled, two parts construction, size 42,8 x 42,5 mm; screw on reverse, maker's mark "J.MICHROWSK...

Large badge, tombak, superimposed silver plated skull, two parts cut out construction with red silk (on cardboard) background, size 116,6 x 41,5 mm; s

Bronze silver plated, one part construction, size 45,2 x 46,3 mm; reverse blank, maker's mark "E.M.UNGER, Lwow", loop for suspension, ...

Brass, signs of silver plating, one part construction, size 44,9 x 48,5 mm; reverse blank, numbered "75" (before "17"), maker...

Bronze silver plated, dark patina, one part massive construction, size 46,1 x 50,5 mm; reverse blank, numbered "569", with loop and suspen...

Bronze, one part construction, size 45,5 x 54,5 mm; reverse blank, numbered "609", with loop for suspension, with new black ribbon. Heavy ...

Tombak silver plated and patinated, one part cut out construction, size 36,3 x 36,5 mm; reverse blank, numbered "9", maker's mark &quo...

Tombak silver plated and toned, one part cut out construction, size 41,5 x 44,6 mm; screw on reverse, iron nut corroded, maker's mark "E.M....

Brass casted, silver plated and patinated, one part construction, size 49,3 x 56,1 mm; reverse blank, with loop for suspension, with new ribbon. Attra

Thin tombak sheet silver plated, one part cut out construction with profile-stamped reverse, size 40,0 x 51,9 mm; screw on reverse, nut is missing. Sm

Bronze casted, partially with dark patina, massive heavy casted one part construction, size 50,0 x 55,6 mm; reverse blank, with loop for suspension, w

Thin zinc sheet, one part construction with profile-stamped reverse, diam.: 42,0 mm; horizontal safety pin on reverse. Excellent detailed fine design

Copper partially silver plated, obverse partially lacquered, slightly arched, one part construction, size 23,2 x 33,7 mm; screw on reverse, maker...

White metal sheet, silver plated, obverse black coloured, one part construction with profile-stamped reverse, size 33 x 49 mm; no pin or screw on reve

Brass silver plated, superimposed small Polish Legion eagle (tombak silver plated), two parts construction, diam.: 40,4 mm; screw on reverse. Heavy ca

Tombak silver plated, one part cut out construction with profile-stamped reverse, size 40,5 x 50,5 mm; maker's mark on reverse "J.WALENTA, ...

Tombak, one part construction, small signs of silver plating, size 44,2 x 48,2 mm; reverse with inscription: "WYBUCH AMUNICYI NA DWORCU CZERNIO...

Tombak silver plated, obverse blue enamelled, one part construction, size 29,8 x 41,1 mm; reverse blank, with suspension ring. Signs of wearing! WES.

White metal silver plated, obverse patinated, one part construction, size 28,0 x 39,6 mm; reverse blank, maker's mark "E.M.UNGER, Lwow"...

Bronze silver plated, partially gilt, obverse black-white-red enamelled, two parts cut out construction, size 48,7 x 62,1 mm; reverse blank, numbered

Tombak sheet silver plated, one part cut out construction with profile-stamped reverse, size 33,5 x 34,5 mm; screw on reverse, maker's mark &quo...

Copper silver plated and patinated, superimposed tombak centre, two parts construction, diam.: 47,4 mm; reverse blank, numbered "119", mak...

Tombak silver plated and patinated, one part construction with profile-stamped reverse, size 43,3 x 43,1 mm; screw on reverse. Fine quality, small sig

Silver, obverse partially enamelled, two parts cut out construction, size 38,7 x 38,4 mm; screw on reverse, maker's mark "W.BUSZEK, Lwow......

Bronze silver plated and patinated, obverse partially enamelled, two parts cut out construction, size 41,5 x 40,3 mm; screw on reverse, maker's ...

Silver patinated, two parts cut out construction, size 37,8 x 38,2 mm; screw on reverse, maker's mark "W.BUSZEK, Lwow...", nut is numb...

Bronze silver plated, one part construction, two tiny holes in the crown on top, size 44,8 x 45,7 mm; screw on reverse, numbered "2414". O...

Thin tombak sheet, partially silver plated, one part cut out construction with profile-stamped reverse, size 44,4 x 45,0 mm; screw on reverse, maker...