Rock Island - Premiere Collector's Firearms Auction

This shotgun features a Darne type action. There are no visible makers markings and the serial number is marked on the inside of the action lever. Sin

Marked "ROYAL GUN BIRMINGHAM" on top of the matte rib and "IMPORT/MADE IN LUTTICH" (Liege) on the left barrel, chokes measuring ...

The barrel flat and water table are marked "SAINT/ MF./ ETIENNE" and the underside of each barrel is marked "INTERIEROR POLI EN LONG ...

The included factory letter states that this rifle was delivered in the United States in 1958. The rifle has ramp front and single leaf rear sights an

Manufactured in 1954, this rifle has a ramp front and two leaf rear sights. With a Hensoldt Wetzlar Diatal-D 2 3/4x21 scope with leather lens covers a

Ramp front and notch rear sights on a barrel marked "JOH. PETERLONGO". Equipped with a Marburg 1-4x20 scope. Blue barrel with remaining me...

This is an example of a prewar Steyr Mannlicher carbine. The top of the receiver is marked "Patent/Mannlicher/Schoenauer/M1908", the left ...

This Mannlicher stock style rifle has a fixed hooded ramp front sight, fixed rear sight and flip up rear sight. Barrel is marked "8x57S". ...

This rifle was manufactured in 1968 and features a fixed ramp front and folding leaf rear sights. It has double set triggers and a Swarovski Habicht 3

This Mannlicher style rifle has a fixed ramped front sight, fixed rear sight and flip up rear sight. "CESKOSLOVENSKA ZBROJOVKA,A.S,BRNO" i...

The heavy barrel is stamped "SCHULTZ & LARSEN OTTERUP" on the top and "7,62 NATO" on the left side at the breech. Equipped w...

Manufactured in Sweden from 1952-1956. Hooded front and open rear sights on the blue barrel with standard markings and features chambered for the 9.3

Standard markings and features. With box numbered to the gun, scope rings and manual. BBL: 24 inch round Stock: fiberglass Gauge: 30-06 Springfi

Manufactured in Germany. Ramp front sight and adjustable rear with standard markings. The receiver has standard markings and detachable magazine. Moun

Manufactured circa 1930-1940 and based on the Model 1917 military action, this rifle has a banded ramp front sight with beaded blade and a Lyman fully

Paul Jeager custom manufactured in June 1982 and so marked on the stock. Ramp blade front and raised two leaf (one fixed, the other folding) rear sigh

This rifle has a custom fixed ramp front and receiver mounted Lyman peep sight. The peep sight is disassembled and stored in the butt trap. The barrel

Manufactured with the standard features and markings and then custom restocked. With a fixed ramp front and an adjustable Williams rear sight. A Redfi

The barrel manufactured without sights is marked Paul Jeager Jenkintown, PA. Receiver is blue with jeweled bolt and blue hinged floor plate. Mounted w

The barrel is manufactured without sights and is marked "Frank Wells" and "22 LR". Equipped with a Leupold 2x7 R.F. Special scop...

Hooded ramp front sight and a quarter rib with a Burris 3x long eye relief scope and three leaf (two folding, one fixed) rear express sight, with the

Also known as the 458x2 inch, the 458 American is a shortened 458 Winchester Magnum parent case, designed to give compact firepower suitable for use a

This rifle has a fixed front ramped sight with a fixed and folding rear leaf sight. The barrel has a muzzle brake, sling mounting base and quarter rib

Ramp beaded blade front sight with provisions for a hood and a custom quarter barrel rib featuring a two leaf rear sight and a Leupold 2x7 scope with

The Model 722 rifle was manufactured between 1955 and 1959. It has a custom .223 heavy round barrel manufactured without iron sights, Zeiss Diatal-C 1

Custom Frank Wells Winchester with a custom featherweight barrel manufactured without sights. Pre-64 type receiver is blue and jeweled with a jeweled

Front blade sight and two leaf rear on a quarter rib octagonal barrel. Winchester Model 70 action with a blued receiver and a jeweled bolt and Leupold

Matte stainless barrel and action with "Harris Gunworks Inc. Phoenix, AZ" and "257 IMP" on the left rear of the barrel. Equipped...

Lightweight Stainless steel barrel with "Jarrett Rifles" etched into the side chambered for the 7 mm-08 Ack. Imp. cartridge. Mounted with...

Manufactured in Montana. The barrel is manufactured without sights with standard markings. Receiver is equipped with scope mounts and has the standard

Manufactured in Oregon as a special edition Super Grade version of the Model 82. Blue barrel manufactured without sights. Deluxe grade AAA fancy check

This rifle was manufactured in Montana and features a stainless steel heavy varmint weight barrel manufactured without sights and chambered for 6x45.

One of the 84 Series single shot bolt action rifles with a solid bottom receiver. Blue barrel manufactured without sights and chambered for the 5.6 mm

This is a premium bolt-action rifle, with a Shilen barrel manufactured without sights and chambered for the .22 L.R. cartridge. The receiver has scope

Manufactured in Oregon and since discontinued. The barrel is manufactured without sights. Receiver is equipped with factory scope mounts and scroll en

The 16 gauge barrels feature 2 9/16" chambers, extra full/improved modified chokes and an extractor. The rifle is chambered for the 9mm X 70R c...

This is the oldest firearms manufacturing firm in Germany. Founded in 1751 in Suhl, the company has produced high quality handguns and long guns. This

This drilling has no maker's marks and features a front bead tipped blade sight and hinged replacement rear sight on the solid matte rib, with d...

The 16 gauge shotgun barrel has a 2 1/2 inch chamber, improved modified choke. The rifle barrel is chambered to accept the 303 British cartridge. Blad

The 16 gauge shotgun barrels feature 2 3/4 inch chambers, extra full/extra full chokes. The rifle barrel has been rechambered to accept the 303 Britis

The 16 gauge shotgun barrels feature extra full/extra full chokes, 2 1/2 inch chambers. Blade front and folding rear sights with two dovetail scope ba

Manufactured in Japan with single bead sight, 2 3/4 inch chambers, and Invector Plus choke system. Floral scroll pattern engraving on the receiver wit

Manufactured in Japan with a green Hi-Viz Comp front and ivory mid bead sights on a matte vent rib barrel. 3 inch chambers with Invector choke system.

Manufactured in 2001 with standard markings and features. Mounted on a ribbed, synthetic forearm and pistol grip stock with solid recoil pad. Barrel h

Manufactured in 2005. Red fiber optic front and mid bead sights on matte vent rib with 3 1/2 inch chamber, and threaded for choke tubes. Advantage Max

Introduced in 1993 and manufactured in Japan, this model features an advanced bolt action single shot design that eliminates recoil by 72%. Double ivo

introduced in 1992. Single bead sight, 2 3/4 inch chamber, Invector plus choke system, gold washed trigger, mounted with a synthetic checkered forearm

Manufactured in Japan with dual ivory sights on a matte vent rib barrel. Chambered for 2 3/4 and 3 inch shells with an Invector Plus choke system. Tan

Manufactured in Japan and featuring dual ivory bead sights on the matte vent rib, 2 3/4 inch chambers, Invector Plus Choke system, and ported barrels.

Manufactured in Belgium and assembled in Portugal. Rifled barrel with standard markings and a cantilever scope mount. Mounted with a select walnut che