Rock Island - Premiere Collector's Firearms Auction

This shotgun features a Darne type action. There are no visible makers markings and the serial number is marked on the inside of the action lever. Sin

Marked "ROYAL GUN BIRMINGHAM" on top of the matte rib and "IMPORT/MADE IN LUTTICH" (Liege) on the left barrel, chokes measuring ...

The barrel flat and water table are marked "SAINT/ MF./ ETIENNE" and the underside of each barrel is marked "INTERIEROR POLI EN LONG ...

The included factory letter states that this rifle was delivered in the United States in 1958. The rifle has ramp front and single leaf rear sights an

Manufactured in 1954, this rifle has a ramp front and two leaf rear sights. With a Hensoldt Wetzlar Diatal-D 2 3/4x21 scope with leather lens covers a

Ramp front and notch rear sights on a barrel marked "JOH. PETERLONGO". Equipped with a Marburg 1-4x20 scope. Blue barrel with remaining me...

This is an example of a prewar Steyr Mannlicher carbine. The top of the receiver is marked "Patent/Mannlicher/Schoenauer/M1908", the left ...

This Mannlicher stock style rifle has a fixed hooded ramp front sight, fixed rear sight and flip up rear sight. Barrel is marked "8x57S". ...

This rifle was manufactured in 1968 and features a fixed ramp front and folding leaf rear sights. It has double set triggers and a Swarovski Habicht 3

This Mannlicher style rifle has a fixed ramped front sight, fixed rear sight and flip up rear sight. "CESKOSLOVENSKA ZBROJOVKA,A.S,BRNO" i...

The heavy barrel is stamped "SCHULTZ & LARSEN OTTERUP" on the top and "7,62 NATO" on the left side at the breech. Equipped w...

Manufactured in Sweden from 1952-1956. Hooded front and open rear sights on the blue barrel with standard markings and features chambered for the 9.3

Standard markings and features. With box numbered to the gun, scope rings and manual. BBL: 24 inch round Stock: fiberglass Gauge: 30-06 Springfi

Manufactured in Germany. Ramp front sight and adjustable rear with standard markings. The receiver has standard markings and detachable magazine. Moun

Manufactured circa 1930-1940 and based on the Model 1917 military action, this rifle has a banded ramp front sight with beaded blade and a Lyman fully

Paul Jeager custom manufactured in June 1982 and so marked on the stock. Ramp blade front and raised two leaf (one fixed, the other folding) rear sigh

This rifle has a custom fixed ramp front and receiver mounted Lyman peep sight. The peep sight is disassembled and stored in the butt trap. The barrel

Manufactured with the standard features and markings and then custom restocked. With a fixed ramp front and an adjustable Williams rear sight. A Redfi

The barrel manufactured without sights is marked Paul Jeager Jenkintown, PA. Receiver is blue with jeweled bolt and blue hinged floor plate. Mounted w

The barrel is manufactured without sights and is marked "Frank Wells" and "22 LR". Equipped with a Leupold 2x7 R.F. Special scop...

Hooded ramp front sight and a quarter rib with a Burris 3x long eye relief scope and three leaf (two folding, one fixed) rear express sight, with the

Also known as the 458x2 inch, the 458 American is a shortened 458 Winchester Magnum parent case, designed to give compact firepower suitable for use a

This rifle has a fixed front ramped sight with a fixed and folding rear leaf sight. The barrel has a muzzle brake, sling mounting base and quarter rib

Ramp beaded blade front sight with provisions for a hood and a custom quarter barrel rib featuring a two leaf rear sight and a Leupold 2x7 scope with

The Model 722 rifle was manufactured between 1955 and 1959. It has a custom .223 heavy round barrel manufactured without iron sights, Zeiss Diatal-C 1

Custom Frank Wells Winchester with a custom featherweight barrel manufactured without sights. Pre-64 type receiver is blue and jeweled with a jeweled

Front blade sight and two leaf rear on a quarter rib octagonal barrel. Winchester Model 70 action with a blued receiver and a jeweled bolt and Leupold

Matte stainless barrel and action with "Harris Gunworks Inc. Phoenix, AZ" and "257 IMP" on the left rear of the barrel. Equipped...

Lightweight Stainless steel barrel with "Jarrett Rifles" etched into the side chambered for the 7 mm-08 Ack. Imp. cartridge. Mounted with...

Manufactured in Montana. The barrel is manufactured without sights with standard markings. Receiver is equipped with scope mounts and has the standard

Manufactured in Oregon as a special edition Super Grade version of the Model 82. Blue barrel manufactured without sights. Deluxe grade AAA fancy check

This rifle was manufactured in Montana and features a stainless steel heavy varmint weight barrel manufactured without sights and chambered for 6x45.

One of the 84 Series single shot bolt action rifles with a solid bottom receiver. Blue barrel manufactured without sights and chambered for the 5.6 mm

This is a premium bolt-action rifle, with a Shilen barrel manufactured without sights and chambered for the .22 L.R. cartridge. The receiver has scope

Manufactured in Oregon and since discontinued. The barrel is manufactured without sights. Receiver is equipped with factory scope mounts and scroll en

The 16 gauge barrels feature 2 9/16" chambers, extra full/improved modified chokes and an extractor. The rifle is chambered for the 9mm X 70R c...

This is the oldest firearms manufacturing firm in Germany. Founded in 1751 in Suhl, the company has produced high quality handguns and long guns. This

This drilling has no maker's marks and features a front bead tipped blade sight and hinged replacement rear sight on the solid matte rib, with d...

The 16 gauge shotgun barrel has a 2 1/2 inch chamber, improved modified choke. The rifle barrel is chambered to accept the 303 British cartridge. Blad

The 16 gauge shotgun barrels feature 2 3/4 inch chambers, extra full/extra full chokes. The rifle barrel has been rechambered to accept the 303 Britis

The 16 gauge shotgun barrels feature extra full/extra full chokes, 2 1/2 inch chambers. Blade front and folding rear sights with two dovetail scope ba

Manufactured in Japan with single bead sight, 2 3/4 inch chambers, and Invector Plus choke system. Floral scroll pattern engraving on the receiver wit

Manufactured in Japan with a green Hi-Viz Comp front and ivory mid bead sights on a matte vent rib barrel. 3 inch chambers with Invector choke system.

Manufactured in 2001 with standard markings and features. Mounted on a ribbed, synthetic forearm and pistol grip stock with solid recoil pad. Barrel h

Manufactured in 2005. Red fiber optic front and mid bead sights on matte vent rib with 3 1/2 inch chamber, and threaded for choke tubes. Advantage Max

Introduced in 1993 and manufactured in Japan, this model features an advanced bolt action single shot design that eliminates recoil by 72%. Double ivo

introduced in 1992. Single bead sight, 2 3/4 inch chamber, Invector plus choke system, gold washed trigger, mounted with a synthetic checkered forearm

Manufactured in Japan with dual ivory sights on a matte vent rib barrel. Chambered for 2 3/4 and 3 inch shells with an Invector Plus choke system. Tan

Manufactured in Japan and featuring dual ivory bead sights on the matte vent rib, 2 3/4 inch chambers, Invector Plus Choke system, and ported barrels.

Manufactured in Belgium and assembled in Portugal. Rifled barrel with standard markings and a cantilever scope mount. Mounted with a select walnut che

Introduced in 1993 and manufactured in Japan. Dual ivory bead sights on a high matte vent rib, chambered for 2 3/4 inch target loads and Inventor Chok

Single bead sight on a vent rib 3/12 inch chambers with Invector Plus choke system. Mounted with a satin finish, checkered walnut forearm and pistol g

Manufactured in 2001 with standard markings, red fiber optic front and steel bead mid sights, threaded for choke tubes, 3 inch chambers and mounted wi

Manufactured in Japan in 1999. Dual ivory bead sights on a matte vent rib with ported barrels and chambered for 2 3/4 inch shells. Auto ejectors and g

Manufactured in Japan in 1998 with ivory front and mid bead sights, 3 inch chambers, and Invector Plus choke system. Scroll pattern engraving on the r

Manufactured in 1998 in Belgium and assembled in Portugal. Single ivory bead sight on a matte vent rib with a 3 1/2 inch chamber, and utilizing the In

Manufactured in Japan in 1991 with a single bead front sight on a matte vent rib, 3 inch chamber and choked full. The right side of the receiver has f

Introduced in 2005. Features a Hi-Viz front and bright midbead sight. 3 1/2 inch chamber and choke tube system. The barrel and pistol grip stock are c

Manufactured in Japan in 1991 with a single bead front sight on a vent rib. The barrel has a 3 inch chamber and is choked full. The blued receiver has

Manufactured in Japan in 1996. Adjustable sights on a 2 3/4 inch chambered, cylinder bore barrel. Standard markings and Grade I lightly engraved recei

Manufactured in 1964. The post-64 jeweled bolt (push feed) is numbered to the gun. The receiver and the rear of the barrel are tapped for scope/sighti

Manufactured in 1966. This is a very scarce post-64 Model 70 Winchester manufactured in the rare 225 Winchester. These were only produced for a few ye

Barrel manufactured without sights, Weaver K-6W scope with Redfield mount, and jeweled post-64 bolt. Checkered pistol grip stock with sling swivel stu

The barrel is manufactured without sights and receiver is tapped for scope/sight mounting. Post-64 jeweled bolt and checkered pistol grip stock with s

Introduced in 1986. Manufactured without sights, receiver drilled and tapped. Features a jeweled bolt and a black one-piece synthetic pistol grip stoc

Manufactured in Japan and features a blue barrel, hammer and bolt. The receiver and lever are coin finish with a gold washed trigger. The barrel has t

Introduced in 1985. Barrel was manufactured without sights, while the rear of the barrel and the receiver are drilled and tapped for scope mounts. Mou

1 of only 3,000 manufactured in 1992 with blade front and ladder rear sights. Standard markings and features with a high gloss finish, multi-point che

Similar to the deluxe version of the Model 1886 it features a blade front sight with an adjustable rear sight, full length magazine tube, and coin fin

Manufactured in 1990 this is one of 5,000 Model 53 rifles produced by Browning. Standard markings and features. Complete with factory box numbered to

Made in Japan. Rifle has a single brass bead sight with standard markings on the barrel. Receiver is scroll engraved with Travis, Bowie, and Crockett

Manufactured in Japan in 1997. This rifle features the Boss system, barrel is manufactured without sights, and the receiver is drilled and tapped for

Manufactured in Belgium with ramp bead front and a Leupold scope. Mauser action features a stainless steel bolt and a floral scroll engraved floor pla

Manufactured in 2005 and manufactured in Japan. Barrel manufactured without sights, and the receiver is drilled and tapped for scope mounts. Mounted w

Manufactured in Japan. Rifle features the Boss system, barrel manufactured without sights, and the receiver is drilled and tapped for scope mounts. Ch

Manufactured in Japan. Features a drilled and tapped receiver, and a hinged floor plate. Checkered black synthetic stock is fitted with a solid recoil

Manufactured in Japan in 1991 and based on the Winchester Model 52 design, this is one of 5,000 Browning Model 52 rifles manufactured. Standard markin

Introduced in 1968. Equipped with an Unertl 15x scope adjustable for windage and elevation. Checkered pistol grip stock with factory grip cap, solid f

Barrel manufactured without sights. Equipped with a Leupold M8-4x scope. Checkered pistol grip stock with sling swivel studs and checkered steel buttp

Manufactured in 1965. Post-64 jeweled bolt, receiver and varmint weight barrel tapped for scope/sight mounting and standard markings with the factory

Manufactured in 1927. Standard Winchester markings including the factory proof on the left side of the barrel and receiver at the breech. Beaded blade

Manufactured from 1955 to 1963. Beaded blade front and adjustable notch rear sights, with standard markings including factory proof on top of barrel a

Manufactured in Montana. Blue octagon barrel manufactured without sights with standard markings and features. Receiver, scope rings, bolt, floor plate

Manufactured in Oregon. Blue barrel manufactured without sights, receiver is blue with factory scope mounts attached and scroll engraved rings in fact

Manufactured in Stevensville, Montana, this single shot bolt action rifle has a heavy barrel manufactured without sights. Receiver is equipped with fa

Manufactured in Oregon and discontinued in 1988. The barrel features front ramp sight with rear leaf open sight with standard markings. Mounted with a

This rifle has a heavy, fluted, stainless steel barrel and a matte blued receiver. It has a Burris 4-12x scope with lens covers and mounted with high

Manufactured in Montana. Stainless steel barrel manufactured without sights chambered for 17 Ackley Hornet cartridges. Receiver equipped with factory

Manufactured in Montana, barrel manufactured without sights with standard markings. Receiver is equipped with scope mounts. Mounted with a AAA Claro w

Manufactured in Stevensville, Montana, this single shot bolt action rifle has a heavy stainless steel barrel manufactured without sights and chambered

Manufactured in Germany with the standard markings and features. Mounted on a skip line checkered walnut stock with a raised cheekpiece, contrasting f

This rifle was manufactured in Germany without sights and has a Leupold Vari-X III 2.5-8x scope. Mounted on a Monte Carlo walnut stock with skip line

This rifle was manufactured in Germany and has a Leupold Vari-X III 2.5-8x scope and Uncle Mikes leather sling. Mounted on a straight grain walnut sto

Manufactured with the standard features and markings. Mounted on a multi-point, skip line checkered, Monte Carlo pistol grip stock with a contrasting

Manufactured without sights, with a Redfield 1 piece scope mount and 4-16x Burris Signature scope with clear optics. Mounted on a black synthetic mult

Manufactured in Japan. Blued barrel manufactured without sights, blue receiver tapped for scope mounts and fluted bolt, with high comb checkered walnu

Built by the Winchester Custom Shop. Manufactured without sights, post-65 push feed, receiver has been drilled and tapped for scope mounts, and a jewe

Manufactured in Belgium from 1959 to 1975. The receiver and breech end of the barrel feature the Medallion Grade floral scroll engraving with a gold h

Manufactured in Belgium in 1956 with blade front and rear wheel adjustable sight. French grey receiver is finely engraved with floral patterns and two

Manufactured between 1973 and 1982. This rifle has Browning scope mounts and rings with a Leupold 3-9x Vari-X II scope. Mounted on a multi-point check