RR Auction's Space & Aviation Auction

Color satin-finish 10 x 8 ‘red-numbered’ NASA photo, signed in black felt tip by all five crew members: Deke Slayton, Vance Brand, Tom Stafford, Alexe

Color satin-finish 10 x 8 ‘red-numbered’ NASA photo of the Soviet Soyuz 16 space vehicle, signed in black felt tip by crew members Alexei Leonov and

Original color glossy 7 x 4.5 double weight photo of the Voskhod 2 crew in their capsule, signed in blue ballpoint by Alexei Leonov and Pavel Belyayev

Apollo-Soyuz Manned Flight Awareness medallion, 1.25? diameter. The face bears the raised re-creation of the two capsules joined together in earth orb

TLS signed “D. K. Slayton,” one page, 8 x 10.25, NASA letterhead, stamp-dated March 3, 1975. Letter to a space enthusiast denying a request. In full:

Two rare, official NASA press kits: Apollo Soyuz Test Project press kit, 8 x 10.5, featuring 113 pages detailing the background, experiments, crew tra

Skylab 4 Recovery cover with a cachet honoring the naval recovery force, and bearing a USS New Orleans February 8, 1974 cancellation, signed in black

Skylab 4 Naval Recovery cover with a cachet honoring the Naval recovery force, signed on the front in black felt tip by Jerry Carr, Bill Pogue, and Ed

A 9 x 9 swatch of Beta cloth with a printed 3.5-inch diameter Skylab II insignia in the center, signed in black ink by Alan Bean, Owen Garriott, and J

A 9 x 9 swatch of Beta cloth with a printed 3-inch diameter mission insignia depicting Snoopy in his flight cap and goggles struggling with a rope aro

Signed book: Skylab: A Chronology. Washington, D. C.: NASA Scientific and Technical Information Office, 1977. Softcover, 8 x 10, 458 pages. Signed on

NASA CSM Malfunction Procedures manual, Revision A, 8.5 x 11, prepared by the Flight Planning Branch, Crew Procedures Division, and dated September 1,

ALS signed “Jack Lousma, Major USMC, NASA Astronaut,” three pages, 8 x 10.5, NASA letterhead, no date. Letter to a space enthusiast. In part: “The ful

Two items: Manned Flight Awareness certificate and medallion, presented to Stuart L. Carter. Commemorative medallion measures 1.5? in diameter, and a

A section of duct work flown aboard the space shuttle Columbia on STS-5. Section measures approximately 29? long, with several bends to it, with one e

Color glossy 10 x 8 photo of both crews of the Space Shuttle Approach and Landing Tests (ALT) at the Rockwell International Space Division's Orb...

Color satin-finish 10 x 8 ‘red-numbered’ NASA photo of the Enterprise about to land, signed in black felt tip by Gordon Fullerton, Fred Haise, Joe Eng

An STS-1 used carrier panel vent cover. Red painted cover measures 13.25 x 6, is labeled at the bottom, “Vent No. 2,” stenciled in white paint “Remove

Weitz’s personally-owned and-worn flight jacket. Brown leather jacket, size 44, bears a manufacturer’s label inside collar, “Flying Man’s Intermediate

Weitz’s personally-owned and-worn Navy uniform. Green dress uniform jacket bears bullion wings over left breast, with three bands and star to each sle

Three unsigned color satin-finish 10 x 8 ‘red-numbered’ NASA photos of STS-1 crew members John Young and Bob Crippen shortly after landing and being g

Weitz’s NASA flight suit. Blue summer flyer’s coveralls, size 42S, features a Shuttle “Mach 25,” patch over right breast, a NASA emblem to right shoul

Two flown cue cards carried aboard STS-6, carried aboard the Space Shuttle Challenger in April of 1983. Both tabbed cards measure 5.5 x 8. The first,

Approach and Landing Test Program Manned Flight Awareness medallion, 1.25? diameter. The face bears the raised re-creation of the Enterprise; the reve

Flown printed fabric American flag, 5.5 x 4, flown aboard the Space Shuttle Columbia during STS-2. Flag is affixed to an 8.5 x 11 certificate stating

Flown SRB wideband signal conditioner, flown aboard Challenger shuttle mission STS-6. Part is stamped “Wideband Signal Conditioner.” Part is shadowbox

Flown white support panel, flown on board the space shuttle Columbia during STS-5, launched on November 11, 1982. Panel measures 55.5 x 9, and retains

A printed Ascent Checklist for shuttle mission STS-108, 8.5 x 11, bound by a staple in the top left corner, fully titled “Mission Operations Directora

Detergent wipes, bagged for flight, with an overall size of 5.5 x 10, with a label reading “Detergent Wipe,” with a 2003 expiration date, a serial num

Three two-ounce bottles of No-Rinse Hair Conditioner, bagged for flight, to an overall size of 8.5 x 6. Each bottle has a small circle of Velcro affix

Large eight-ounce bottle of No-Rinse hair conditioner. This conditioner was done by NASA contract and made to be used on board the space shuttle and t

Space Shuttle avionics black box. Box measures 11 x 9.5 x 4, weighs 11.3 pounds, and bears a metal plate labeled “Multiplexer Freq. Div. Wideband,” ma

Large console alarm panel from Crawler #2, 19 x 3.75, manufactured by Allied Bendix Aerospace. Alarm has four status lights, four fault alarm lights,

Collection of seven printed Flight Crew Briefings for various shuttle flights, two of which are signed by crew members, each bound by a single staple

DS, one page, 8.5 x 11, July 2, 1984. Document marking the official arrival of the new group of NASA astronauts at Johnson Space Center, Houston Texas

Two solid rocket booster firing safety plugs with caps, one measuring 4? long, the other measuring 5? long. These plugs were used so engineers and tec

Available to US bidders only. Unusual light emerald-color fit-check tile, 6 x 6 x 3, used to fit-check the shape and size of the thermal protection ti

Light blue NASA flight suit. Suit has a NASA patch sewn to left breast, Velcro patch to right breast for name tag, zippered cuffs, and has eight pocke

Flown shuttle carrier panel flown on one of the shuttle orbiters. Metal plate measures 6 x 9.75, with several stenciled openings which read, “L. P. Bl

Beige NASA flight jacket, with a King’s Point makers label sewn inside collar. Jacket has a NASA patch sewn to left breast, and features two slash poc

Collection of ten flown pieces from the shuttle delay cutter parachute assembly. Items include: a deployed cutter assembly, 8.5 x 2, with a fragment o

Flown FCE/EVA Neck Seal helmet cavity. Lower neck seal was a part of a flown Launch and Entry Suit (LES) ACES space suit. Black seal measures 10” in d

Flown printed fabric American flag, 5.5 x 4.25, and a flown embroidered four-inch diameter mission patch, both flown aboard the Space Shuttle Endeavou

Two flown Gimbal nuts, flown on Discovery mission STS-91, the final mission to the Mir space station. Both bolts are 1.25” in diameter at their base.

Flown insulation blanket, carried aboard shuttle Discovery mission STS-82, to repair and maintain the Hubble telescope. Gold and silver foil blanket,

Color 8.5 x 15 certificate for the 1998 Combined Federal Campaign of the Texas Gulf Coast, expressing appreciation for a donation to E. Lee Williams,

Spiral-bound manual entitled “An Orientation–Training Course on the Redesigned Solid Rocket Motor (RSRM),” 11.25 x 8.5, 203 pages. This internal manua

Flown intercom remote station, 9.5 x 5.25, carried aboard the Space Shuttle Columbia on June 5, 1991, and used on Space Lab 1 (SLS–1). Panel has one h

Flown Orbiter Window Frame. Large universal orbiter flight deck window frame, flown over 20 times on the shuttle Atlantis. Black window frame measures

Orbiter second generation, early prototype hard window cover. Cover measures approximately 32.5 x 30. Constructed inside the Orbiter Processing Facili