Premiere Firearms Auction

Rebated barrel with a band of floral engraving, and the right side of the frame has a similar pattern around the edge, with "THE PROTECTOR PAT....

Manufactured circa 1870. Fixed sights, with the top of the barrel marked "BALLARD'S" and the left flat marked "C. H. BALLARD &...

One of approximately 1000 produced in the 1860s. Manufactured without sights, with the cylinder marked "BACON ARMS CO. NORWICH. CONN." on ...

This Type III was manufactured between 1912 and 1935. The top of the barrel rib is marked "REMINGTON ARMS--U.M.C. CO. ILION N.Y." It has a...

Brass pin front and breech notch rear sights, with "C. SHARPS/ PATENT 1859" and "C. SHARP & Co / PHILADA. PA." on the left a...

German silver blade sight, with "-COLT-" in italics on top of the barrel and "41 CAL" on the left side of the frame. Blue finish...

Silver finished half moon sight, with "-COLT-" in italics on top of the barrel and "41 CAL" on the left side of the frame, with ...

Top strap marked "HOPKINS & ALLEN MFG CO. / XL NO 5 / PAT MAR. 23 1871". Matching serial number on barrel and frame. BBL: 2 1/2 inch...

The top strap is marked "MOHEGAN", trade name was used by the Hood Firearms Company. The barrel, top strap, and cylinder features a zigzag...

Manufactured circa 1870s with a total quantity estimated at 2000. Top barrel flat marked "XL DERRINGER" and "PAT. APR. 5, 1870" ...

Produced 1854-1869, only about 2,300 of these 31 caliber models were manufactured. Cone and notch sights, with the top strap unmarked and "BEAL...

Blade and notch sights, with one line "REMINGTON ARMS CO. ILION, N.Y." address on the barrel rib and serial number on the underside of the...

Produced in the 1890s. Rebated barrel with a band of floral engraving and the frame has a similar pattern around the edge, with the patent marking in

This is an example of a Type II, or Model Number 3, derringer manufactured from 1888 to 1911. The derringer has the manual extractor and is marked &...

Produced circa 1863-1864. Cone and top strap groove sights, with the top of the barrel marked "J.D. BLISS. NEW HAVEN - CT". Matching seria...

Two line address/patent date on the top barrel flat and "XL No 4 NY" on the top strap. Matching serial number on the barrel, cylinder pin,...

Produced between 1903 and 1916. German silver blade front and notch rear sights, with "J. STEVENS A.&T. CO/ CHICOPEE FALLS, MASS., U.S.A.&q...

Manufactured from 1896 to 1916. Globe front and screw adjustable rear sight on a barrel marked with the two line address. Blue with nickel iron frame

Manufactured from 1863 to 1864 with a total production of an estimated 3,000. The top of the barrel is marked "J.D. BLISS. NEW HAVEN - CT"...

Manufactured from 1896 to 1916. Blade front sight with bead and screw adjustable rear peep sight on a barrel marked with the two line address. Blue wi

Manufactured from 1880 to 1882. Standard two line address/patent date marking on the barrel rib. Serial number matches on the frame and barrel latch w

Manufactured from 1870 to 1875. Standard barrel markings, 7-shot cylinder and bird head grips. Serial number matches on the frame and left grip panel.

Made in 1874. Blade and notch sights, with "COLTS HOUSE PISTOL" markings on top of the barrel, patent dates in the sight groove, distincti...

It is estimated that a few thousand of these Second Model Merwin Hulbert spur trigger revolvers were produced. The revolver has the exposed cylinder p

Top strap marked "AETNA 3". Fitted with fancy checkered bird head grips. Matching numbers on frame and both grips. BBL: 3 inch octagon ...

Manufactured circa 1869 to 1880 and is a very close copy of the Smith & Wesson 1st Model, 3rd Issue. Standard one line New York address on the b...

The top barrel flat is marked "RED JACKET NO. 4". Scroll engraved frame sides with a zigzag line and dot pattern engraved on the barrel, t...

This is a fine representative example of a Second Model Maynard carbine, (also known as the Model 1863), manufactured from 1863 to 1865, with approxim

This is an example of one of the 4,200 percussion Civil War carbines converted during the Indian Wars, however not relined to 50 caliber. This carbine

Introduced circa 1875. Breechblock utilizes the John Marlin innovation of reversible firing pin allowing for use of both rim and centerfire cartridges

Manufactured from 1862 to 1865 with many issued to Union cavalry troops in Arkansas, Kansas, Missouri and New York. The lock is marked "STARR A...

Manufactured by H. Merrill of Baltimore, Maryland with a total production of about 14,500. This is a single shot breech loading carbine, loaded by lif

Manufactured in the late 1850s and early 1860s. Standard "STARR. ARMS. Co. NEW. YORK." address on left side of frame, "STARRS PATENT...

Manufactured from 1863-1875. German silver cone front sight and notched rear sight. Brass trigger guard. Single letter inspection marks (M and H) are

Manufactured between 1863 and 1865. The left side of the frame is marked "STARR.ARMS.Co.NEW.YORK." and the reverse is marked "STARR&...

Two thousand of the 3,400 produced were delivered to the Ordnance Department and the revolvers were issued to several Federal Cavalry regiments during

German silver cone front and groove rear sights, with "PETTENGILLS/ PATENT 1856" on the right side of the sighting groove and "PATd J...

Manufactured from 1863 to 1873. The top barrel flat is marked "PATENTED SEPT. 14, 1858 / E. REMINGTON & SONS, ILION, NEW YORK, U.S.A. / NE...

Manufactured by Richardson & Overman of Philadelphia with a total production of about 12,700 in the 50 caliber. This is a single shot, breechloa...

The Model 1853 Slanting Breech Carbine was also known as the "John Brown Model" and was manufactured by Robbins and Lawrence, Windsor, Ver...

Blade front and 3-leaf rear sights, with the rear sight base doubling as the locking point for the breech lever, which has a 2-line patent marking. Th

Produced between 1862 and 1865, this is possibly one of less than 7000 carbines purchased by the Navy for use by Marines aboard ships. This particular

This is a solid example of a Kentucky marked Triplett & Scott carbine that was manufactured in 1865 by the Meriden Manufacturing Company as part...

Purchased by the Ordnance Department circa 1863-1865. Blade front and two leaf folding rear sights, with "CAST STEEL 1864" on the top, and...

Early 19th century U.S. Eagle Pommel officer's saber with 31 3/4 inch blade with unstopped fuller. The sides of the blade have niter blue panels...

Founded in 1860, Pratt & Whitney got its start producing machine tools, in particular for the sewing machine industry and tooling for Civil War ...

Regulation pattern U.S. Model 1860 Saber with 34 3/4 inch single fuller blade rounded back. The blade is stamped "U.S./ G.W.C/ 1865" on t...

1) U.S. Ames Model 1840 Light Artillery Saber made in 1863. The saber has a 32 inch curved single fuller blade with rounded back, with the Ames scroll

1) Ames naval bayonet, 20" single fuller blade with makers mark and "U.S.N. / C.G.S./ 1870" on the ricasso, brass hilt marked "C...

German silver cone front and groove rear sights, with "PETTENGILLS/ PATENT 1856" on the right side of the sighting groove and "RAYMON...